Templates for Consumer Use in Designing Customised Products

Yudhi Ariadi; Allan Rennie

Templates for Consumer Use in Designing Customised Products

Yudhi Ariadi
, Allan Rennie

Lancaster University

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

Abstract

This research proposes a new design system for consumers who would use the product to run an easy-to-operate design and selection tool by themselves instead of conventional Computer Aided Design (CAD). In terms of manufacturing the product, several studies focus on involving the consumer as much and as early as possible. However, recent developments of Additive Layer Manufacturing (ALM) technologies have led to a renewed interest in allowing the consumers to develop customised products. As a result, manufacturing is being brought closer to consumers. This paper would simplify the CAD stages by utilising design templates for consumer use in customising additive layer manufactured products.

Original language	English
Pages (from-to)	450-458
Number of pages	9
Journal	Solid Freeform Fabrication proceedings
Publication status	Published - 6 Aug 2008
Event	19th International Solid Freeform Fabrication Symposium - University of Texas at Austin, Texas, United States Duration: 5 Aug 2008 → 8 Aug 2008 https://www.sffsymposium.org/

Keywords

CAD
Additive Manufacturing
3D printing
customisation
mass customisation

Cite this

@article{224a0a04a95d4ee1af390a1d6425972b,

title = "Templates for Consumer Use in Designing Customised Products",

abstract = "This research proposes a new design system for consumers who would use the product to run an easy-to-operate design and selection tool by themselves instead of conventional Computer Aided Design (CAD). In terms of manufacturing the product, several studies focus on involving the consumer as much and as early as possible. However, recent developments of Additive Layer Manufacturing (ALM) technologies have led to a renewed interest in allowing the consumers to develop customised products. As a result, manufacturing is being brought closer to consumers. This paper would simplify the CAD stages by utilising design templates for consumer use in customising additive layer manufactured products.",

keywords = "CAD, Additive Manufacturing, 3D printing, customisation, mass customisation",

author = "Yudhi Ariadi and Allan Rennie",

year = "2008",

month = aug,

day = "6",

language = "English",

pages = "450--458",

journal = "Solid Freeform Fabrication proceedings",

issn = "1053-2153",

publisher = "University of Texas at Austin",

note = "19th International Solid Freeform Fabrication Symposium ; Conference date: 05-08-2008 Through 08-08-2008",

url = "https://www.sffsymposium.org/",

}

TY - JOUR

T1 - Templates for Consumer Use in Designing Customised Products

AU - Ariadi, Yudhi

AU - Rennie, Allan

PY - 2008/8/6

Y1 - 2008/8/6

N2 - This research proposes a new design system for consumers who would use the product to run an easy-to-operate design and selection tool by themselves instead of conventional Computer Aided Design (CAD). In terms of manufacturing the product, several studies focus on involving the consumer as much and as early as possible. However, recent developments of Additive Layer Manufacturing (ALM) technologies have led to a renewed interest in allowing the consumers to develop customised products. As a result, manufacturing is being brought closer to consumers. This paper would simplify the CAD stages by utilising design templates for consumer use in customising additive layer manufactured products.

AB - This research proposes a new design system for consumers who would use the product to run an easy-to-operate design and selection tool by themselves instead of conventional Computer Aided Design (CAD). In terms of manufacturing the product, several studies focus on involving the consumer as much and as early as possible. However, recent developments of Additive Layer Manufacturing (ALM) technologies have led to a renewed interest in allowing the consumers to develop customised products. As a result, manufacturing is being brought closer to consumers. This paper would simplify the CAD stages by utilising design templates for consumer use in customising additive layer manufactured products.

KW - CAD

KW - Additive Manufacturing

KW - 3D printing

KW - customisation

KW - mass customisation

UR - https://eprints.lancs.ac.uk/id/eprint/50511/

M3 - Conference article

SN - 1053-2153

SP - 450

EP - 458

JO - Solid Freeform Fabrication proceedings

JF - Solid Freeform Fabrication proceedings

T2 - 19th International Solid Freeform Fabrication Symposium

Y2 - 5 August 2008 through 8 August 2008

ER -

Templates for Consumer Use in Designing Customised Products

Abstract

Keywords

Other files and links

Design Template for Customising Products

Cite this