Solution space generation for disassembly research on liquid crystal displays televisions

Guoqing Jin; Weidong Li; Sheng Wang; Xin Lu

doi:10.1109/CSCWD.2014.6846813

Solution space generation for disassembly research on liquid crystal displays televisions

Guoqing Jin, Weidong Li, Sheng Wang, Xin Lu

Research output: Chapter in Book/Report/Conference proceeding › Chapter

5 Citations (Scopus)

87 Downloads (Pure)

Abstract

Waste Electrical and Electronic Equipment (WEEE) are one of the most significant waste products in modern societies, and disassembly is a critical step to reduce WEEE. In the past two decades, despite there are many research articles published for disassembly research of WEEE, those researches mainly focus on searching optimised disassembly sequences according to different considerations of stakeholders, while another important problem, i.e., the generation of solution space has received little attentions. However, before applying disassembly planning and optimisation techniques in real industrial cases such as Liquid Crystal Display (LCD) televisions, it cannot evade the issue of the solution space generation. In this paper, an effective approach was developed to generate the solution space for LCD televisions. Firstly, six space interference matrices are generated based on a CAD model, which can be used to represent the space relationship of each components in six directions in a Cartesian coordinate system. A matrix analysis algorithm is then developed to obtain all feasible disassembly sequences by analysing the obtained six space interference matrices in a 3D environment. The result can be used as a solution space to support a disassembly planning method to achieve better economic value and environmental protection requirements within an acceptable runtime. Finally, an industrial case on Changhong LCD television of the type LC24F4 is used to verify and demonstrate the performance of the developed research.

Original language	English
Title of host publication	Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014
Editors	J-L. Hou, A.J.C. Trappey, C-W. Wu, K-H. Chang, C-S. Liao, W-M. Shen, J-P. Barthès, J-Z. Luo
Publisher	IEEE
Pages	35-40
ISBN (Print)	9781479937769
DOIs	https://doi.org/10.1109/CSCWD.2014.6846813
Publication status	Published - 2014

Bibliographical note

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

Keywords

liquid crystal display televisions
matrix analysis algorithm
space interference matrix

Access to Document

10.1109/CSCWD.2014.6846813

Solution space generation

Cite this

Jin, G., Li, W., Wang, S., & Lu, X. (2014). Solution space generation for disassembly research on liquid crystal displays televisions. In J.-L. Hou, A. J. C. Trappey, C.-W. Wu, K.-H. Chang, C.-S. Liao, W.-M. Shen, J.-P. Barthès, & J.-Z. Luo (Eds.), Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014 (pp. 35-40). IEEE. https://doi.org/10.1109/CSCWD.2014.6846813

Solution space generation for disassembly research on liquid crystal displays televisions. / Jin, Guoqing; Li, Weidong; Wang, Sheng et al.
Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014. ed. / J-L. Hou; A.J.C. Trappey; C-W. Wu; K-H. Chang; C-S. Liao; W-M. Shen; J-P. Barthès; J-Z. Luo. IEEE, 2014. p. 35-40.

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Jin, G, Li, W, Wang, S & Lu, X 2014, Solution space generation for disassembly research on liquid crystal displays televisions. in J-L Hou, AJC Trappey, C-W Wu, K-H Chang, C-S Liao, W-M Shen, J-P Barthès & J-Z Luo (eds), Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014. IEEE, pp. 35-40. https://doi.org/10.1109/CSCWD.2014.6846813

Jin G, Li W, Wang S, Lu X. Solution space generation for disassembly research on liquid crystal displays televisions. In Hou JL, Trappey AJC, Wu CW, Chang KH, Liao CS, Shen WM, Barthès JP, Luo JZ, editors, Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014. IEEE. 2014. p. 35-40 doi: 10.1109/CSCWD.2014.6846813

Jin, Guoqing ; Li, Weidong ; Wang, Sheng et al. / Solution space generation for disassembly research on liquid crystal displays televisions. Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014. editor / J-L. Hou ; A.J.C. Trappey ; C-W. Wu ; K-H. Chang ; C-S. Liao ; W-M. Shen ; J-P. Barthès ; J-Z. Luo. IEEE, 2014. pp. 35-40

@inbook{48c0a42aa278469791bfac4ee001d256,

title = "Solution space generation for disassembly research on liquid crystal displays televisions",

abstract = "Waste Electrical and Electronic Equipment (WEEE) are one of the most significant waste products in modern societies, and disassembly is a critical step to reduce WEEE. In the past two decades, despite there are many research articles published for disassembly research of WEEE, those researches mainly focus on searching optimised disassembly sequences according to different considerations of stakeholders, while another important problem, i.e., the generation of solution space has received little attentions. However, before applying disassembly planning and optimisation techniques in real industrial cases such as Liquid Crystal Display (LCD) televisions, it cannot evade the issue of the solution space generation. In this paper, an effective approach was developed to generate the solution space for LCD televisions. Firstly, six space interference matrices are generated based on a CAD model, which can be used to represent the space relationship of each components in six directions in a Cartesian coordinate system. A matrix analysis algorithm is then developed to obtain all feasible disassembly sequences by analysing the obtained six space interference matrices in a 3D environment. The result can be used as a solution space to support a disassembly planning method to achieve better economic value and environmental protection requirements within an acceptable runtime. Finally, an industrial case on Changhong LCD television of the type LC24F4 is used to verify and demonstrate the performance of the developed research. ",

keywords = "liquid crystal display televisions, matrix analysis algorithm, space interference matrix",

author = "Guoqing Jin and Weidong Li and Sheng Wang and Xin Lu",

note = "{\textcopyright} 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.",

year = "2014",

doi = "10.1109/CSCWD.2014.6846813",

language = "English",

isbn = "9781479937769",

pages = "35--40",

editor = "J-L. Hou and A.J.C. Trappey and C-W. Wu and K-H. Chang and C-S. Liao and W-M. Shen and J-P. Barth{\`e}s and J-Z. Luo",

booktitle = "Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014",

publisher = "IEEE",

address = "United States",

}

TY - CHAP

T1 - Solution space generation for disassembly research on liquid crystal displays televisions

AU - Jin, Guoqing

AU - Li, Weidong

AU - Wang, Sheng

AU - Lu, Xin

N1 - © 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

PY - 2014

Y1 - 2014

N2 - Waste Electrical and Electronic Equipment (WEEE) are one of the most significant waste products in modern societies, and disassembly is a critical step to reduce WEEE. In the past two decades, despite there are many research articles published for disassembly research of WEEE, those researches mainly focus on searching optimised disassembly sequences according to different considerations of stakeholders, while another important problem, i.e., the generation of solution space has received little attentions. However, before applying disassembly planning and optimisation techniques in real industrial cases such as Liquid Crystal Display (LCD) televisions, it cannot evade the issue of the solution space generation. In this paper, an effective approach was developed to generate the solution space for LCD televisions. Firstly, six space interference matrices are generated based on a CAD model, which can be used to represent the space relationship of each components in six directions in a Cartesian coordinate system. A matrix analysis algorithm is then developed to obtain all feasible disassembly sequences by analysing the obtained six space interference matrices in a 3D environment. The result can be used as a solution space to support a disassembly planning method to achieve better economic value and environmental protection requirements within an acceptable runtime. Finally, an industrial case on Changhong LCD television of the type LC24F4 is used to verify and demonstrate the performance of the developed research.

AB - Waste Electrical and Electronic Equipment (WEEE) are one of the most significant waste products in modern societies, and disassembly is a critical step to reduce WEEE. In the past two decades, despite there are many research articles published for disassembly research of WEEE, those researches mainly focus on searching optimised disassembly sequences according to different considerations of stakeholders, while another important problem, i.e., the generation of solution space has received little attentions. However, before applying disassembly planning and optimisation techniques in real industrial cases such as Liquid Crystal Display (LCD) televisions, it cannot evade the issue of the solution space generation. In this paper, an effective approach was developed to generate the solution space for LCD televisions. Firstly, six space interference matrices are generated based on a CAD model, which can be used to represent the space relationship of each components in six directions in a Cartesian coordinate system. A matrix analysis algorithm is then developed to obtain all feasible disassembly sequences by analysing the obtained six space interference matrices in a 3D environment. The result can be used as a solution space to support a disassembly planning method to achieve better economic value and environmental protection requirements within an acceptable runtime. Finally, an industrial case on Changhong LCD television of the type LC24F4 is used to verify and demonstrate the performance of the developed research.

KW - liquid crystal display televisions

KW - matrix analysis algorithm

KW - space interference matrix

U2 - 10.1109/CSCWD.2014.6846813

DO - 10.1109/CSCWD.2014.6846813

M3 - Chapter

SN - 9781479937769

SP - 35

EP - 40

BT - Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014

A2 - Hou, J-L.

A2 - Trappey, A.J.C.

A2 - Wu, C-W.

A2 - Chang, K-H.

A2 - Liao, C-S.

A2 - Shen, W-M.

A2 - Barthès, J-P.

A2 - Luo, J-Z.

PB - IEEE

ER -

Solution space generation for disassembly research on liquid crystal displays televisions

Abstract

Bibliographical note

Keywords

Access to Document

Fingerprint

Cite this