Simultaneous improvement of power density and durability of sulfonated poly(ether ether ketone) membrane by embedding CeO 2 ‐ATiO 2: A comprehensive study in low humidity proton exchange membrane fuel cells

Hariprasad Ranganathan, Vinothkannan Mohanraj, Ae Rhan Kim, Vijayapradeep Subramanian, Min‐Suk Oh, Dong Jin Yoo

Research output: Contribution to journalArticlepeer-review

46 Citations (Scopus)

Abstract

Herein, we describe the incorporation of cerium oxide-coated amine-functionalized titania nanorods (CeO2-ATiO2) as a bifunctional nanofiller in sulfonated poly(ether ether ketone) (SPEEK) as a cost-effective and high-performance proton exchange membrane (PEM) for PEM fuel cells (PEMFCs). Facile and effective functionalization of TiO2 was performed using amine-containing organic moieties, followed by coating the ATiO2 nanorods with CeO2. A simple solution casting method was employed to incorporate CeO2-ATiO2 into the SPEEK matrix with various weight ratio of 0.5%, 1%, 2%, 4%, or 6%. The successful incorporation of prepared nanofiller in the SPEEK membrane matrix was confirmed by structural and morphological studies such as Fourier transform infrared, X-ray diffractometer, scanning electron microscopy, and atomic force microscope of the SPEEK/CeO2-ATiO2 composite membranes. The presence of ATiO2 improved proton conductivity while CeO2 alleviated the chemical degradation of the membrane by scavenging free radicals. The proton conductivity of an SPEEK/CeO2-ATiO2 (2 wt%) nanocomposite membrane at 60°C under 20% relative humidity (RH) was 17.06 mS cm−1 whereas that of a bare SPEEK membrane under the same conditions was only 4.53 mS cm−1. PEMFCs containing SPEEK/CeO2-ATiO2 (2 wt%) nanocomposite membrane attained a maximum power density of 117 mW cm−2 at a load current density of 371 mA/cm2 at 60°C under 100% RH. In contrast, a PEMFC containing the bare SPEEK membrane delivered a power density of 91 mW cm−2 at a load current of 253 mA cm-2. A single cell open circuit voltage (OCV) test to examine the durability of membranes revealed that a PEMFC with an SPEEK/CeO2-ATiO2 (2 wt%) membrane showed excellent stability with an OCV decay of 0.925 mV h−1 at 60°C under 30% RH, whereas that of a PEMFC with a bare SPEEK membrane was 3.437 mV h−1 under identical conditions. Based on the above mentioned results, it is found that the SPEEK/CeO2-ATiO2 nanocomposite membranes overcome the durability issues of pristine SPEEK membranes and show enhanced electrochemical performance under a harsh PEMFC environment.
Original languageEnglish
Pages (from-to)9041 - 9057
Number of pages17
JournalInternational Journal of Energy Research
Volume46
Issue number7
Early online date5 Mar 2022
DOIs
Publication statusPublished - 15 May 2022
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2022 John Wiley & Sons Ltd.

Funder

This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (NRF‐2020R1A2B5B01001458); Basic Science Research through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF‐2021R1I1A1A01050905); and Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government (MOTIE) (NO. 20214000000040, Innovation Research Center for Next Generation Battery‐based Materials, Parts and Applied Technology).

Korea Institute of Energy Technology Evaluation and Planning, Grant/Award Number: 20214000000040; National Research Foundation of Korea, Grant/Award Numbers: 2020R1A2B5B01001458, 2021R1I1A1A01050905 Funding information

Keywords

  • PEMFC
  • durability
  • hybrid membranes
  • power density
  • radical scavenger

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Fuel Technology
  • Nuclear Energy and Engineering
  • Renewable Energy, Sustainability and the Environment

Fingerprint

Dive into the research topics of 'Simultaneous improvement of power density and durability of sulfonated poly(ether ether ketone) membrane by embedding CeO 2 ‐ATiO 2: A comprehensive study in low humidity proton exchange membrane fuel cells'. Together they form a unique fingerprint.

Cite this