Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method

M. Kartal, M. Turski, G. Johnson, M. E. Fitzpatrick, S. Gungor, P. J. Withers, L. Edwards

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

26 Citations (Scopus)

Abstract

This paper describes the measurement of longitudinal residual stresses within specially designed 200x180x25 mm groove weld specimens. The purpose of these measurements was to compare the residual stress field arising from single and multi-pass weld beads laid down within the constraint of a groove in order to validate finite element simulations of the welding process. Measurements were made over the cross section at the mid-bead length, utilising the relatively new Contour method and neutron diffraction. Results from these measurements indicate a larger peak tensile longitudinal residual stresses within the weld region of the multi-pass weld sample. Good agreement is found between both techniques.

Original languageEnglish
Title of host publicationResidual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7
PublisherTrans Tech Publications Ltd
Pages671-676
Number of pages6
ISBN (Print)9780878494149
DOIs
Publication statusPublished - 1 Dec 2006
Externally publishedYes
Event7th European Conference on Residual Stresses - Berlin, Germany
Duration: 13 Sep 200615 Sep 2006

Publication series

NameMaterials Science Forum
Volume524-525
ISSN (Print)0255-5476

Conference

Conference7th European Conference on Residual Stresses
Abbreviated titleECRS 7
CountryGermany
CityBerlin
Period13/09/0615/09/06

Fingerprint

stress measurement
Stress measurement
Neutron diffraction
grooves
residual stress
neutron diffraction
Residual stresses
Welds
beads
welding
stress distribution
Welding
cross sections
diffraction
simulation

Keywords

  • Contour method
  • Neutron diffraction
  • Residual stress
  • Welding

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Kartal, M., Turski, M., Johnson, G., Fitzpatrick, M. E., Gungor, S., Withers, P. J., & Edwards, L. (2006). Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. In Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7 (pp. 671-676). (Materials Science Forum; Vol. 524-525). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.524-525.671

Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. / Kartal, M.; Turski, M.; Johnson, G.; Fitzpatrick, M. E.; Gungor, S.; Withers, P. J.; Edwards, L.

Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7. Trans Tech Publications Ltd, 2006. p. 671-676 (Materials Science Forum; Vol. 524-525).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Kartal, M, Turski, M, Johnson, G, Fitzpatrick, ME, Gungor, S, Withers, PJ & Edwards, L 2006, Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. in Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7. Materials Science Forum, vol. 524-525, Trans Tech Publications Ltd, pp. 671-676, 7th European Conference on Residual Stresses, Berlin, Germany, 13/09/06. https://doi.org/10.4028/www.scientific.net/MSF.524-525.671
Kartal M, Turski M, Johnson G, Fitzpatrick ME, Gungor S, Withers PJ et al. Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. In Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7. Trans Tech Publications Ltd. 2006. p. 671-676. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.524-525.671
Kartal, M. ; Turski, M. ; Johnson, G. ; Fitzpatrick, M. E. ; Gungor, S. ; Withers, P. J. ; Edwards, L. / Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method. Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7. Trans Tech Publications Ltd, 2006. pp. 671-676 (Materials Science Forum).
@inproceedings{16471ca6d6e34f94ab54a336ffec06b2,
title = "Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method",
abstract = "This paper describes the measurement of longitudinal residual stresses within specially designed 200x180x25 mm groove weld specimens. The purpose of these measurements was to compare the residual stress field arising from single and multi-pass weld beads laid down within the constraint of a groove in order to validate finite element simulations of the welding process. Measurements were made over the cross section at the mid-bead length, utilising the relatively new Contour method and neutron diffraction. Results from these measurements indicate a larger peak tensile longitudinal residual stresses within the weld region of the multi-pass weld sample. Good agreement is found between both techniques.",
keywords = "Contour method, Neutron diffraction, Residual stress, Welding",
author = "M. Kartal and M. Turski and G. Johnson and Fitzpatrick, {M. E.} and S. Gungor and Withers, {P. J.} and L. Edwards",
year = "2006",
month = "12",
day = "1",
doi = "10.4028/www.scientific.net/MSF.524-525.671",
language = "English",
isbn = "9780878494149",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "671--676",
booktitle = "Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7",

}

TY - GEN

T1 - Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method

AU - Kartal, M.

AU - Turski, M.

AU - Johnson, G.

AU - Fitzpatrick, M. E.

AU - Gungor, S.

AU - Withers, P. J.

AU - Edwards, L.

PY - 2006/12/1

Y1 - 2006/12/1

N2 - This paper describes the measurement of longitudinal residual stresses within specially designed 200x180x25 mm groove weld specimens. The purpose of these measurements was to compare the residual stress field arising from single and multi-pass weld beads laid down within the constraint of a groove in order to validate finite element simulations of the welding process. Measurements were made over the cross section at the mid-bead length, utilising the relatively new Contour method and neutron diffraction. Results from these measurements indicate a larger peak tensile longitudinal residual stresses within the weld region of the multi-pass weld sample. Good agreement is found between both techniques.

AB - This paper describes the measurement of longitudinal residual stresses within specially designed 200x180x25 mm groove weld specimens. The purpose of these measurements was to compare the residual stress field arising from single and multi-pass weld beads laid down within the constraint of a groove in order to validate finite element simulations of the welding process. Measurements were made over the cross section at the mid-bead length, utilising the relatively new Contour method and neutron diffraction. Results from these measurements indicate a larger peak tensile longitudinal residual stresses within the weld region of the multi-pass weld sample. Good agreement is found between both techniques.

KW - Contour method

KW - Neutron diffraction

KW - Residual stress

KW - Welding

UR - http://www.scopus.com/inward/record.url?scp=38049089928&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.524-525.671

DO - 10.4028/www.scientific.net/MSF.524-525.671

M3 - Conference proceeding

SN - 9780878494149

T3 - Materials Science Forum

SP - 671

EP - 676

BT - Residual Stresses VII - Proceedings of the 7th European Conference on Residual Stresses, ECRS 7

PB - Trans Tech Publications Ltd

ER -