Neutron diffraction residual strain measurements in plasma sprayed nanostructured hydroxyapatite coatings for orthopaedic implants

R. Ahmed, N. H. Faisal, S. M. Knupfer, A. M. Paradowska, M. E. Fitzpatrick, K. A. Khor, J. Cizek

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

10 Citations (Scopus)

Abstract

Residual strains in plasma sprayed and heat-treated hydroxyapatite (HA) coatings deposited on a titanium alloy (Ti-6Al-4V) substrate were investigated by means of neutron diffraction. Strain measurements were performed in vertical scan ("z-scanning") mode to provide a through thickness strain profile in the coating and substrate materials. Results are discussed in terms of the influence of heat-treatment on the residual strain profile of these biomedical coatings. This investigation concluded that the heat-treatment had a significant effect on the residual strain profile in HA coatings.

Original languageEnglish
Title of host publicationMechanical Stress Evaluation by Neutrons and Synchrotron Radiation
EditorsY Akiniwa, K Akita, H Suzuki
PublisherSciTePress
Pages309-314
Number of pages6
ISBN (Print)9780878492585, 9780878492589
DOIs
Publication statusPublished - 16 Aug 2010
Externally publishedYes
Event5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, MECA SENS V/3rd International Symposium of Quantum Beam Science Directorate of Japan Atomic Energy Agency, QuBS2009 - Mito, Japan
Duration: 10 Nov 200912 Nov 2009

Publication series

NameMaterials Science Forum
Volume652
ISSN (Print)0255-5476

Conference

Conference5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, MECA SENS V/3rd International Symposium of Quantum Beam Science Directorate of Japan Atomic Energy Agency, QuBS2009
CountryJapan
CityMito
Period10/11/0912/11/09

    Fingerprint

Keywords

  • Hydroxyapatite coatings
  • Neutron diffraction
  • Orthopaedic implants
  • Plasma spray
  • Residual strain
  • Ti-6Al-4V
  • X-ray diffraction

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Ahmed, R., Faisal, N. H., Knupfer, S. M., Paradowska, A. M., Fitzpatrick, M. E., Khor, K. A., & Cizek, J. (2010). Neutron diffraction residual strain measurements in plasma sprayed nanostructured hydroxyapatite coatings for orthopaedic implants. In Y. Akiniwa, K. Akita, & H. Suzuki (Eds.), Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (pp. 309-314). (Materials Science Forum; Vol. 652). SciTePress. https://doi.org/10.4028/www.scientific.net/MSF.652.309