Ethanol blends in spark ignition engines: RON, octane-added value, cooling effect, compression ratio, and potential engine efficiency gain

Chongming Wang, Soheil Zeraati-Rezaei, Liming Xiang, Hongming Xu

Research output: Contribution to journalArticle

39 Citations (Scopus)

Abstract

Identifying a sustainable, practical and low-emission energy supply for modern transportation has always been a challenge for energy and automotive researchers. While electrification of the vehicle powertrain is a promising long-term energy supply solution, bio-ethanol is currently playing an important role as a short- and mid-term solution for the popular spark ignition (SI) engine. The questions of how to use ethanol more effectively as an octane booster, how much potential engine thermal efficiency gain can be achieved by using ethanol blends and what their impacts on the vehicle mileage range are have become highly relevant. In this paper, a critical review and discussion regarding these questions is provided. Firstly, studies regarding octane rating and octane index of gasoline fuels, and K value (a scaling factor for calculating octane index) for various SI engines are reviewed. Then, a review of the research octane number (RON), motor octane number (MON) and octane sensitivity for ethanol blends is reported. Three established models for predicting RON of ethanol blends are reviewed and compared. In addition, a simple RON prediction model proposed by the authors of this paper is provided. Parameters such as octane value and octane-added index (OAI) are proposed to describe the effectiveness of using ethanol as an octane booster. It is found that there exits an optimised ethanol blend ratio that gives the maximum octane value; and this optimised blend ratio is insensitive to the octane rating of the base gasoline. Secondly, the charge cooling effect of ethanol blends and its corresponding equivalent octane number are discussed and reviewed. Thirdly, engine thermal efficiency improvement due to increased compression ratios, which results from the octane index gain achieved by using ethanol blends, is reviewed. Finally, a discussion about the impact of ethanol blends on the vehicle mileage range is presented. The lower heating value of ethanol is about 33% lower than that of typical gasoline, leading to a reduction in the mileage range of the vehicle, however, improved engine thermal efficiency achieved by using ethanol blends can partially, or even fully, offset the negative impact of the lower calorific value on the mileage range.
Original languageEnglish
Pages (from-to)603-619
Number of pages17
JournalApplied Energy
Volume191
Early online date10 Feb 2017
DOIs
Publication statusPublished - 1 Apr 2017
Externally publishedYes

Fingerprint

Compression ratio (machinery)
Antiknock rating
Internal combustion engines
ethanol
engine
Ethanol
compression
Engines
Cooling
cooling
Gasoline
effect
Calorific value
electrification
Powertrains

Keywords

  • Charge cooling
  • Compression ratio
  • Ethanol
  • RON
  • Spark ignition

Cite this

Ethanol blends in spark ignition engines: RON, octane-added value, cooling effect, compression ratio, and potential engine efficiency gain. / Wang, Chongming; Zeraati-Rezaei, Soheil; Xiang, Liming; Xu, Hongming.

In: Applied Energy, Vol. 191, 01.04.2017, p. 603-619.

Research output: Contribution to journalArticle

@article{005aaca507cc47d2aa08416c1ce7641e,
title = "Ethanol blends in spark ignition engines: RON, octane-added value, cooling effect, compression ratio, and potential engine efficiency gain",
abstract = "Identifying a sustainable, practical and low-emission energy supply for modern transportation has always been a challenge for energy and automotive researchers. While electrification of the vehicle powertrain is a promising long-term energy supply solution, bio-ethanol is currently playing an important role as a short- and mid-term solution for the popular spark ignition (SI) engine. The questions of how to use ethanol more effectively as an octane booster, how much potential engine thermal efficiency gain can be achieved by using ethanol blends and what their impacts on the vehicle mileage range are have become highly relevant. In this paper, a critical review and discussion regarding these questions is provided. Firstly, studies regarding octane rating and octane index of gasoline fuels, and K value (a scaling factor for calculating octane index) for various SI engines are reviewed. Then, a review of the research octane number (RON), motor octane number (MON) and octane sensitivity for ethanol blends is reported. Three established models for predicting RON of ethanol blends are reviewed and compared. In addition, a simple RON prediction model proposed by the authors of this paper is provided. Parameters such as octane value and octane-added index (OAI) are proposed to describe the effectiveness of using ethanol as an octane booster. It is found that there exits an optimised ethanol blend ratio that gives the maximum octane value; and this optimised blend ratio is insensitive to the octane rating of the base gasoline. Secondly, the charge cooling effect of ethanol blends and its corresponding equivalent octane number are discussed and reviewed. Thirdly, engine thermal efficiency improvement due to increased compression ratios, which results from the octane index gain achieved by using ethanol blends, is reviewed. Finally, a discussion about the impact of ethanol blends on the vehicle mileage range is presented. The lower heating value of ethanol is about 33{\%} lower than that of typical gasoline, leading to a reduction in the mileage range of the vehicle, however, improved engine thermal efficiency achieved by using ethanol blends can partially, or even fully, offset the negative impact of the lower calorific value on the mileage range.",
keywords = "Charge cooling, Compression ratio, Ethanol, RON, Spark ignition",
author = "Chongming Wang and Soheil Zeraati-Rezaei and Liming Xiang and Hongming Xu",
year = "2017",
month = "4",
day = "1",
doi = "10.1016/j.apenergy.2017.01.081",
language = "English",
volume = "191",
pages = "603--619",
journal = "Applied Energy",
issn = "0306-2619",
publisher = "Elsevier",

}

TY - JOUR

T1 - Ethanol blends in spark ignition engines: RON, octane-added value, cooling effect, compression ratio, and potential engine efficiency gain

AU - Wang, Chongming

AU - Zeraati-Rezaei, Soheil

AU - Xiang, Liming

AU - Xu, Hongming

PY - 2017/4/1

Y1 - 2017/4/1

N2 - Identifying a sustainable, practical and low-emission energy supply for modern transportation has always been a challenge for energy and automotive researchers. While electrification of the vehicle powertrain is a promising long-term energy supply solution, bio-ethanol is currently playing an important role as a short- and mid-term solution for the popular spark ignition (SI) engine. The questions of how to use ethanol more effectively as an octane booster, how much potential engine thermal efficiency gain can be achieved by using ethanol blends and what their impacts on the vehicle mileage range are have become highly relevant. In this paper, a critical review and discussion regarding these questions is provided. Firstly, studies regarding octane rating and octane index of gasoline fuels, and K value (a scaling factor for calculating octane index) for various SI engines are reviewed. Then, a review of the research octane number (RON), motor octane number (MON) and octane sensitivity for ethanol blends is reported. Three established models for predicting RON of ethanol blends are reviewed and compared. In addition, a simple RON prediction model proposed by the authors of this paper is provided. Parameters such as octane value and octane-added index (OAI) are proposed to describe the effectiveness of using ethanol as an octane booster. It is found that there exits an optimised ethanol blend ratio that gives the maximum octane value; and this optimised blend ratio is insensitive to the octane rating of the base gasoline. Secondly, the charge cooling effect of ethanol blends and its corresponding equivalent octane number are discussed and reviewed. Thirdly, engine thermal efficiency improvement due to increased compression ratios, which results from the octane index gain achieved by using ethanol blends, is reviewed. Finally, a discussion about the impact of ethanol blends on the vehicle mileage range is presented. The lower heating value of ethanol is about 33% lower than that of typical gasoline, leading to a reduction in the mileage range of the vehicle, however, improved engine thermal efficiency achieved by using ethanol blends can partially, or even fully, offset the negative impact of the lower calorific value on the mileage range.

AB - Identifying a sustainable, practical and low-emission energy supply for modern transportation has always been a challenge for energy and automotive researchers. While electrification of the vehicle powertrain is a promising long-term energy supply solution, bio-ethanol is currently playing an important role as a short- and mid-term solution for the popular spark ignition (SI) engine. The questions of how to use ethanol more effectively as an octane booster, how much potential engine thermal efficiency gain can be achieved by using ethanol blends and what their impacts on the vehicle mileage range are have become highly relevant. In this paper, a critical review and discussion regarding these questions is provided. Firstly, studies regarding octane rating and octane index of gasoline fuels, and K value (a scaling factor for calculating octane index) for various SI engines are reviewed. Then, a review of the research octane number (RON), motor octane number (MON) and octane sensitivity for ethanol blends is reported. Three established models for predicting RON of ethanol blends are reviewed and compared. In addition, a simple RON prediction model proposed by the authors of this paper is provided. Parameters such as octane value and octane-added index (OAI) are proposed to describe the effectiveness of using ethanol as an octane booster. It is found that there exits an optimised ethanol blend ratio that gives the maximum octane value; and this optimised blend ratio is insensitive to the octane rating of the base gasoline. Secondly, the charge cooling effect of ethanol blends and its corresponding equivalent octane number are discussed and reviewed. Thirdly, engine thermal efficiency improvement due to increased compression ratios, which results from the octane index gain achieved by using ethanol blends, is reviewed. Finally, a discussion about the impact of ethanol blends on the vehicle mileage range is presented. The lower heating value of ethanol is about 33% lower than that of typical gasoline, leading to a reduction in the mileage range of the vehicle, however, improved engine thermal efficiency achieved by using ethanol blends can partially, or even fully, offset the negative impact of the lower calorific value on the mileage range.

KW - Charge cooling

KW - Compression ratio

KW - Ethanol

KW - RON

KW - Spark ignition

U2 - 10.1016/j.apenergy.2017.01.081

DO - 10.1016/j.apenergy.2017.01.081

M3 - Article

VL - 191

SP - 603

EP - 619

JO - Applied Energy

JF - Applied Energy

SN - 0306-2619

ER -