Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Author

  • Michael Fitzpatrick

Vehicle Dynamics Virtual Sensing Using Unscented Kalman Filter: Simulations and Experiments in a Driver-in-the-loop setup

Acosta, M., Kanarachos, S. & Fitzpatrick, M., 18 Apr 2019, Informatics in Control, Automation and Robotics: 14th International Conference, ICINCO 2017 Madrid, Spain, July 26-28, 2017 Revised Selected Papers. Springer Verlag, p. 582-602 21 p. (Lecture Notes in Electrical Engineering; vol. 495).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Use of Bonded Crack Retarders to Improve Damage Tolerance of Wing Covers

Heinimann, M., Maziarz, R., Castelletti, L., Boscolo, M., Naik, V., Doucet, J., Irving, P., Zhang, X., Syed, A., Liljedahl, C. D. M., Fitzpatrick, M. E. & Moffatt, J. E., 2016, (Accepted/In press).

Research output: Contribution to conferencePaper

Through-Thickness Residual Stress Profiles in Austenitic Stainless Steel Welds: A Combined Experimental and Prediction Study

Mathew, J., Moat, R., Paddea, S., Francis, J. A., Fitzpatrick, M. & Bouchard, J., Dec 2017, In : Metallurgical and Materials Transactions A. 48, 12, p. 6178-6191 14 p.

Research output: Contribution to journalArticle

Open Access
File
6 Citations (Scopus)
15 Downloads (Pure)

The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation

Simm, T. H., Das, Y. B., Forsey, A. N., Gungor, S., Fitzpatrick, M. E., Prakash, D. G. L., Moat, R. J., Birosca, S., Quinta da Fonseca, J. & Perkins, K. M., Feb 2020, In : Materials Characterization. 160, 110114.

Research output: Contribution to journalArticle

Thermodynamic calculations of oxygen self-diffusion in mixed-oxide nuclear fuels

Parfitt, D. C., Cooper, M. W. D., Rushton, M. J. D., Christopoulos, S-R. G., Fitzpatrick, M. E. & Chroneos, A., 29 Jul 2016, In : RSC Advances. 6, p. 74018-74027 10 p.

Research output: Contribution to journalArticle

Open Access
File
10 Citations (Scopus)
27 Downloads (Pure)

The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel

Das, Y. B., Forsey, A. N., Kelleher, J., Kabra, S., Fitzpatrick, M. E., Simm, T. H., Gungor, S. & Moat, R. J., 22 Nov 2018, In : Materials Science and Technology (United Kingdom). 34, 17, p. 2114-2125 12 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

The effect of material cyclic deformation properties on residual stress generation by laser shock processing

Angulo, I., Cordovilla, F., García-Beltrán, A., Smyth, N. S., Langer, K., Fitzpatrick, M. E. & Ocaña, J. L., 1 Jun 2019, In : International Journal of Mechanical Sciences. 156, p. 370-381 12 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
12 Downloads (Pure)

The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V

Perumal, B., Rist, M. A., Gungor, S., Brooks, J. W. & Fitzpatrick, M. E., Aug 2016, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 8, p. 4128-4136 9 p.

Research output: Contribution to journalArticle

Open Access
File
15 Citations (Scopus)
22 Downloads (Pure)

TEM study of the effect of high-temperature thermal cycles on the stability of the Y-Al-O oxides in MA956 ODS steel

Leo, J. R. O., Moturu, S. R. & Fitzpatrick, M. E., 1 Sep 2019, In : Journal of Materials Research and Technology. 8, 5, p. 3719-3725 7 p.

Research output: Contribution to journalArticle

Open Access
File
7 Downloads (Pure)
Open Access
File
5 Citations (Scopus)
13 Downloads (Pure)

Supervision Control for Quality Assurance in Milling Processes

Caires Moreira, L., Lu, X., Li, W. & Fitzpatrick, M., 2017, 47th International Conference on Computers & Industrial Engineering 2017 (CIE47): How Digital Platforms and Industrial Engineering are Transforming Industry and Services. Computers and Industrial Engineering, p. 398-405 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
1 Citation (Scopus)

Stabilization of Zrn+1AlCn MAX Phases: Issues and Achievements

Zapata-Solvas, E., Christopoulos, S., Fitzpatrick, M., Chroneos, A. & Lee, W. E., 23 Oct 2016.

Research output: Contribution to conferenceAbstract

Open Access

Robust Virtual Sensing for Vehicle Agile Manoeuvring: A Tyre-model-less Approach

Acosta, M., Kanarachos, S. & Fitzpatrick, M., Mar 2018, In : IEEE Transactions on Vehicular Technology. 67, 3, p. 1894-1908

Research output: Contribution to journalArticle

Open Access
File
10 Citations (Scopus)
151 Downloads (Pure)

Residual stress redistribution during elastic shake down in welded plates

Chukkan, J. R., Wu, G., Fitzpatrick, M. E., Eren, E., Zhang, X. & Kelleher, J., 25 May 2018, In : MATEC Web of Conferences. 165, 6 p., 21004.

Research output: Contribution to journalConference article

Open Access
File
2 Citations (Scopus)
7 Downloads (Pure)
Open Access
File
29 Citations (Scopus)
169 Downloads (Pure)
Open Access
File
1 Citation (Scopus)
51 Downloads (Pure)

Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes

Haigh, R. D., Hutchings, M. T., Fitzpatrick, M. E., James, J. A., Okido, S., Mizuno, R., Ogawa, K. & Hughes, D. J., Aug 2016, In : International Journal of Pressure Vessels and Piping. 144, p. 1–10

Research output: Contribution to journalArticle

Open Access
File
18 Downloads (Pure)

Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling

Honnige, J. R., Colegrove, P. A., Ahmed, B., Fitzpatrick, M., Ganguly, S., Lee, T. L. & Williams, S. W., 15 Jul 2018, In : Materials & Design. 150, p. 193-205 13 p.

Research output: Contribution to journalArticle

Open Access
File
38 Citations (Scopus)
32 Downloads (Pure)
2 Citations (Scopus)
Open Access
File
5 Citations (Scopus)
8 Downloads (Pure)

Reactor pressure vessel embrittlement: Insights from neural network modelling

Mathew, J., Parfitt, D., Wilford, K., Riddle, N., Alamaniotis, M., Chroneos, A. & Fitzpatrick, M. E., 15 Apr 2018, In : Journal of Nuclear Materials. 502, p. 311-322 12 p.

Research output: Contribution to journalArticle

Open Access
File
6 Citations (Scopus)
28 Downloads (Pure)

Probabilistic kernel machines for predictive monitoring of weld residual stress in energy systems

Alamaniotis, M., Mathew, J., Chroneos, A., Fitzpatrick, M. & Tsoukolas, L., May 2018, In : Engineering Applications of Artificial Intelligence. 71, p. 138-154 16 p.

Research output: Contribution to journalArticle

Open Access
File
6 Citations (Scopus)
23 Downloads (Pure)
Open Access
File
17 Citations (Scopus)
94 Downloads (Pure)

Prediction of residual stresses in girth welded pipes using an artificial neural network approach

Mathew, J., Moat, R. J., Paddea, S., Fitzpatrick, M. E. & Bouchard, P. J., 27 Jan 2017, In : International Journal of Pressure Vessels and Piping. 150, p. 89-95 6 p.

Research output: Contribution to journalArticle

Open Access
File
11 Citations (Scopus)
54 Downloads (Pure)

Physical properties and defect processes of M3SnC2 (M = Ti, Zr, Hf) MAX phases: Effect of M-elements

Hadi, M. A., Christopoulos, S., Naqib, S. H., Chroneos, A., Fitzpatrick, M. & Islam, A. K. M. A., 5 Jun 2018, In : Journal of Alloys and Compounds. 748, p. 804-813 10 p.

Research output: Contribution to journalArticle

Open Access
File
15 Citations (Scopus)
24 Downloads (Pure)
Open Access
File
3 Citations (Scopus)
24 Downloads (Pure)

Optimized Tire Force Estimation using Extended Kalman Filter and Fruit Fly Optimization

Kanarachos, S., Acosta, M. & Fitzpatrick, M., 18 Dec 2017, 43rd Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 4074-4079 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
File
2 Citations (Scopus)
109 Downloads (Pure)

Optimal design of a quadratic parameter varying vehicle suspension system using contrast-based Fruit Fly Optimisation

Kanarachos, S., Dizqah, A. M., Chrysakis, G. & Fitzpatrick, M. E., 1 Jan 2018, In : Applied Soft Computing. 62, p. 463-477 15 p.

Research output: Contribution to journalArticle

Open Access
File
18 Citations (Scopus)
124 Downloads (Pure)

On full MAGV lateral dynamics exploitation: Autonomous Drift Control

Acosta, M., Kanarachos, S. & Fitzpatrick, M., 1 Mar 2018, 15th International Workshop on Advanced Motion Control (IEEE AMC2018), Tokyo . IEEE

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

1 Citation (Scopus)

Observations of the stress developed in Si inclusions following plastic flow in the matrix of an Al–Si–Mg alloy

Davidson, C. J., Finlayson, T. R., Fitzpatrick, M. E., Griffiths, J. R., Oliver, E. C. & Wang, Q., 11 Apr 2017, In : Philosophical Magazine. 97, 17, p. 1398-1417 20 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
16 Downloads (Pure)

Neutron Transmission Strain Measurements on IMAT: Residual Strain Mapping in an AlSiCp Metal Matrix Composite

Ramadhan, R., Kockelmann, W., Tremsin, A. S. & Fitzpatrick, M., 20 Apr 2018, International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation: MECA SENS 2017. Materials Research Forum LLC, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
File
18 Downloads (Pure)
Open Access
File
12 Citations (Scopus)
99 Downloads (Pure)

Microstructure, tensile and creep properties of an austenitic ODS 316L steel

Leo, J. R. O., Pirfo Barroso, S., Fitzpatrick, M. E., Wang, M. & Zhou, Z., 11 Mar 2019, In : Materials Science and Engineering A. 749, p. 158-165 8 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Measurement and Modelling of Residual Stress in Wire-Feed Additively Manufactured Titanium

Ahmed, B., van der Veen, S., Fitzpatrick, M. & Guo, H., 2018, In : Materials Science and Technology. 34, 18, p. 2250-2259 10 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
10 Downloads (Pure)

Mapping residual strain induced by cold working and by laser shock peening using neutron transmission spectroscopy

Ramadhan, R. S., Syed, A. K., Tremsin, A. S., Kockelmann, W., Dalgliesh, R., Chen, B., Parfitt, D. & Fitzpatrick, M. E., 5 Apr 2018, In : Materials and Design. 143, p. 56-64 9 p.

Research output: Contribution to journalArticle

Open Access
File
10 Citations (Scopus)
23 Downloads (Pure)

M3AlC2 MAX phases for nuclear applications

Christopoulos, S., Fitzpatrick, M. & Chroneos, A., 6 Sep 2017.

Research output: Contribution to conferenceAbstract

Low cycle fatigue life prediction in shot-peened components of different geometries—part I: residual stress relaxation

You, C., Achintha, M., Soady, K. A., Smyth, N., Fitzpatrick, M. E. & Reed, P. A. S., May 2017, In : Fatigue & Fracture of Engineering Materials and Structures. 40, 5, p. 761-775 15 p.

Research output: Contribution to journalArticle

Open Access
File
8 Citations (Scopus)
15 Downloads (Pure)

Investigation of oxygen self-diffusion in PuO2 by combining molecular dynamics with thermodynamic calculations

Saltas, V., Chroneos, A., Cooper, M. W. D., Fitzpatrick, M. E. & Vallianatos, F., 26 Oct 2016, In : RSC Advances. 6, 105, p. 103641-103649 9 p.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)
19 Downloads (Pure)

Intrinsic defect processes and elastic properties of Ti3AC2 (A = Al, Si, Ga, Ge, In, Sn) MAX phases

Christopoulos, S., Filippatos, P-P., Hadi, M. A., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 14 Jan 2018, In : Journal of Applied Physics. 123, 2, 025103.

Research output: Contribution to journalArticle

Open Access
File
11 Citations (Scopus)
47 Downloads (Pure)
Open Access
File
8 Citations (Scopus)
59 Downloads (Pure)

In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel

Das, Y. B., Forsey, A. N., Simm, T. H., Perkins, K. M., Fitzpatrick, M. E., Gungor, S. & Moat, R. J., 16 Sep 2016, In : Materials & Design. 112, p. 107-116

Research output: Contribution to journalArticle

Open Access
File
33 Citations (Scopus)
130 Downloads (Pure)

Finite Element Analysis of Laser Peening of Thin Aluminum Structures

Langer, K., Spradlin, T. & Fitzpatrick, M., 6 Jan 2020, In : Metals. 10, 1, 16 p., 93.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
4 Downloads (Pure)

Fatigue performance of bonded crack retarders in the presence of cold worked holes and interference-fit fasteners

Syed, A., Zhang, X., Moffatt, J., Maziarz, R., Castelletti, L. & Fitzpatrick, M., 23 Aug 2017, In : International Journal of Fatigue. 105, p. 111-118 8 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
26 Downloads (Pure)

Fatigue crack growth in a laser shock peened residual stress field

Pavan, M., Furfari, D., Ahmad, B., Gharghouri, M. A. & Fitzpatrick, M. E., 1 Jun 2019, In : International Journal of Fatigue. 123, p. 157-167 11 p.

Research output: Contribution to journalArticle

Open Access
File
19 Citations (Scopus)
8 Downloads (Pure)
Open Access
File
27 Citations (Scopus)
51 Downloads (Pure)

Experimental study of room-temperature indentation viscoplastic ‘creep’ in zirconium

Storer, S. C., Fitzpatrick, M. E., Hainsworth, S. V. & Rist, M. A., 21 Jul 2016, In : Philosophical Magazine. 96, p. 2547-2563

Research output: Contribution to journalArticle

Open Access
File
3 Citations (Scopus)
32 Downloads (Pure)

Evolution of stress fields and phase content in corroded zirconium cladding materials

Chong, K. B. & Fitzpatrick, M. E., 15 Sep 2017, In : Surface and Coatings Technology. 324, p. 140-145 6 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
12 Downloads (Pure)

Energy-resolved neutron imaging for reconstruction of strain introduced by cold working

Tremsin, A. S., Kockelmann, W., Kelleher, J. F., Paradowska, A. M., Ramadhan, R. S. & Fitzpatrick, M. E., 28 Feb 2018, In : Journal of Imaging. 4, 3, 12 p., 48.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)
2 Downloads (Pure)
Open Access
File
4 Citations (Scopus)
14 Downloads (Pure)