Find Research Outputs

Search results

• Review article

  Residual strain and fracture response of Al ₂O ₃ coatings deposited via APS and HVOF techniques

  Ahmed, R., Faisal, N. H., Paradowska, A. M. & Fitzpatrick, M. E., 1 Jan 2012, In: Journal of Thermal Spray Technology. 21, 1, p. 23-40 18 p.

  Research output: Contribution to journal › Review article › peer-review

  • Plasmas
  • Coatings
  • coatings
  • air
  • Air
  14 Citations (Scopus)
• Poster

  312 MAX phases: Nuclear applications of M3AlC2

  Christopoulos, S., Parfitt, D., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 4 Jul 2019.

  Research output: Contribution to conference › Poster
• Paper

  Anomaly detection in time series data using a combination of wavelets, neural networks and Hilbert transform

  Kanarachos, S., Mathew, J., Chroneos, A. & Fitzpatrick, M. E., 2015.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Anomaly detection
  • Time series
  • Neural networks
  • Wavelet analysis
  • Structural health monitoring
  11 Citations (Scopus)

  277 Downloads (Pure)

• Spontaneous Fruit Fly Optimisation for truss weight minimisation: Performance evaluation based on the no free lunch theorem

  Onyekpe, U., Kanarachos, S. & Fitzpatrick, M. E., 24 Sep 2019.

  Research output: Contribution to conference › Paper › peer-review

  • Fruits
  • Tuning

• Use of Bonded Crack Retarders to Improve Damage Tolerance of Wing Covers

  Heinimann, M., Maziarz, R., Castelletti, L., Boscolo, M., Naik, V., Doucet, J., Irving, P., Zhang, X., Syed, A., Liljedahl, C. D. M., Fitzpatrick, M. E. & Moffatt, J. E., 2016, (Accepted/In press).

  Research output: Contribution to conference › Paper

  • retarders
  • wings
  • cracks
  • damage
  • residual stress
• Conference proceeding

  Effect of Ultrasonic Peening on Fatigue Strength of Welded Marine Structures - Lloyd’s Register Research Programme

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmad, B. & Fitzpatrick, M. E., 2014, Unknown Host Publication.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

  1 Citation (Scopus)

• Neutron diffraction study of elastoplastic behaviour of Al/SiCp metal matrix composite during tensile loading and unloading

  Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Neutron diffraction
  • metal matrix composites
  • unloading
  • Unloading
  • neutron diffraction
  1 Citation (Scopus)

• Residual Stress Measurements and Fatigue Testing of Butt Welds Subjected to Peening Treatments

  Ahmad, B., Fitzpatrick, M. E., Howarth, D., Polezhayeva, H., Przydatek, J. & Robinson, A., 2013, Unknown Host Publication. International Institute of Welding

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

• Studies regarding corrosion mechanisms in zirconium alloys

  Preuss, M., Frankel, P., Lozano-Perez, S., Hudson, D., Polatidis, E., Ni, N., Wei, J., English, C., Storer, S., Chong, K. B., Fitzpatrick, M., Wang, P., Smith, J., Grovenor, C., Smith, G., Sykes, J., Cottis, B., Lyon, S., Hallstadius, L., Comstock, R. J. & 2 others, Ambard, A. & Blat-Yrieix, M., 1 Jan 2011, Zirconium in the Nuclear Industry: 16th International Symposium. Barbéris, P. & Limbäck, M. (eds.). ASTM International, p. 649-681 33 p. (ASTM Special Technical Publication; vol. 1529 STP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Zirconium alloys
  • Oxides
  • Corrosion
  • Metals
  • Trademarks
  29 Citations (Scopus)

• The development of stress in inclusions caused by plastic flow in the matrix of a two-phase composite and its effect on the relief of initial residual stress

  Griffiths, J. R., Davidson, C. J., Finlayson, T. R., Oliver, E. C., Wang, Q. & Fitzpatrick, M. E., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014. Engineers Australia, p. 788-795 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Plastic flow
  • Residual stresses
  • Composite materials
  • Thermal expansion
  • Thermal stress

• Vehicle Dynamics Virtual Sensing Using Unscented Kalman Filter: Simulations and Experiments in a Driver-in-the-loop setup

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., 18 Apr 2019, Informatics in Control, Automation and Robotics: 14th International Conference, ICINCO 2017 Madrid, Spain, July 26-28, 2017 Revised Selected Papers. Springer Verlag, p. 582-602 21 p. (Lecture Notes in Electrical Engineering; vol. 495).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Kalman filters
  • Tires
  • Active safety systems
  • Experiments
  • Chassis
• Chapter

  Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening

  Coratella, S., Toparli, M. B. & Fitzpatrick, M. E., Sep 2013, Materials Science Forum. Trans Tech Publications, Vol. 768-769. p. 185-192

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Shot peening
  • Residual stresses
  • Lasers
  • Finite element method
  • Mechanical engineering
  2 Citations (Scopus)

• Atomic force microscopy (AFM) for materials characterization

  Khan, M. K., Wang, Q. Y. & Fitzpatrick, M. E., 2016, Materials Characterization Using Nondestructive Evaluation (NDE) Methods. Huebschen, G., Altpeter, I., Tschuncky, R. & Herrmann, H-G. (eds.). London: Woodhead Publishing, p. 1-16

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • atomic force microscopy
  • characterization
  • liquid air
  • stiffness
  • spatial resolution
  4 Citations (Scopus)

• Insight on the inconsistencies of Barkhausen signal measurements for radiation damage on nuclear reactor steel

  Pirfo Barroso, S., Fizpatrick, M. E., Gillemot, F., Horváth, M. & Szekely, R., 2014, AIP Conference Proceedings. AIP, Vol. 1581. p. 1229

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Radiation damage
  • Magnetic variables measurement
  • Nuclear reactors
  • Irradiation
  • Steel
  1 Citation (Scopus)

• Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

  Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • aircraft structures
  • straps
  • retarders
  • durability
  • cracks
  8 Citations (Scopus)

• Nanostructural Metallic Materials-Nanoengineering and Nanomanufacturing

  Fitzpatrick, M. E., Caballero, F. G. & Van De Voorde, M. H., 30 Jan 2015, The Nano-Micro Interface: Bridging the Micro and Nano Worlds: Second Edition. Wiley, Vol. 1-2. p. 135-158 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  • Rare Earth Metals
  • Fabrication
  • Nanostructured materials
  • Rare earths
  • Alloying
• Article

  312 MAX Phases: Elastic Properties and Lithiation

  Filippatos, P. P., Hadi, M. A., Christopoulos, S., Kordatos, A., Kelaidis, N., Fitzpatrick, M., Vasilopoulou, M. & Chroneos, A., 8 Dec 2019, In: Materials. 12, 13 p., 4098.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Atoms
  • Density functional theory
  • elastic properties
  • Transition metals
  • Lithium
  8 Citations (Scopus)

  14 Downloads (Pure)

• A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 49, 4, p. 751-760 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Mechanical Properties
  • Mechanical testing
  • nanoindentation
  36 Citations (Scopus)

• A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings

  Ahmed, R., Fitzpatrick, M. E. & Faisal, N. H., 25 May 2012, In: Surface and Coatings Technology. 206, 19-20, p. 4180-4185 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutron diffraction
  • Sprayed coatings
  • sprayed coatings
  • Strain measurement
  • strain measurement
  15 Citations (Scopus)

• Activation volumes of oxygen self-diffusion in fluorite structured oxides

  Christopoulos, S-R. G., Kordatos, A., Cooper, M. W. D., Fitzpatrick, M. E. & Chroneos, A., 27 Oct 2016, In: Materials Research Express. 3, 10, 105504.

  Research output: Contribution to journal › Article › peer-review

  • Fluorspar
  • Oxides
  • Chemical activation
  • Oxygen
  • Molecular dynamics
  2 Citations (Scopus)

• Anelasticity in austenitic stainless steel

  Ashwin Rao, P., Bouchard, J., Northover, S. M. & Fitzpatrick, M. E., Nov 2012, In: Acta Materialia. 60, 19, p. 6851–6861

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Austenitic stainless steel
  • Creep
  • Neutron diffraction
  • Unloading
  • Strain rate
  22 Citations (Scopus)

• A new bridge technique for neutron tomography and diffraction measurements

  Burca, G., James, J. A., Kockelmann, W., Fitzpatrick, M. E., Zhang, S. Y., Hovind, J. & Van Langh, R., 21 Sep 2011, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 651, 1, p. 229-235 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutrons
  • Diffraction
  • Tomography
  • tomography
  • neutrons
  10 Citations (Scopus)

• An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V

  Syed, A., Ahmad, B., Guo, H., Machry, T., Eatock, D., Meyer, J., Fitzpatrick, M. & Zhang, X., 7 May 2019, In: Materials Science and Engineering: A. 755, p. 246-257 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • titanium alloy (TiAl6V4)
  • Fatigue crack propagation
  • Selective laser melting
  • residual stress
  • Residual stresses
  18 Citations (Scopus)

  25 Downloads (Pure)

• An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels

  Zhang, H., Gorley, M. J., Boon Chong, K., Fitzpatrick, M. E., Roberts, S. G. & Grant, P. S., 5 Jan 2014, In: Journal of Alloys and Compounds. 582, 2014, p. 769-773

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Neutron powder diffraction
  • Oxides
  • Ferritic stainless steel
  • Precipitates
  • Annealing
  19 Citations (Scopus)

• An iterative technique for the reconstruction of residual stress fields in a butt-welded plate from experimental measurement, and comparison with welding process simulation

  Chukkan, J. R., Wu, G., Fitzpatrick, M. E., Jones, S. & Kelleher, J., 1 Sep 2019, In: International Journal of Mechanical Sciences. 160, p. 421-428 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • welding
  • stress distribution
  • residual stress
  • Residual stresses
  • Welding
  1 Citation (Scopus)

  9 Downloads (Pure)

• Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches

  Khan, K., Fitzpatrick, M., Hainsworth, S., Evans, A. D. & Edwards, L., 2011, In: Acta Materialia. 59, 20, p. 7508-7520 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Nanoindentation
  • X ray diffraction
  • Residual stresses
  • Diffraction
  27 Citations (Scopus)

• Application of the eigenstrain approach to predict the residual stress distribution in laser shock peened AA7050-T7451 samples

  Coratella, S., Sticchi, M., Toparli, M. B., Fitzpatrick, M. E. & Kashaev, K., 2015, In: Surface and Coatings Technology. 273, p. 39-49

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • stress distribution
  • residual stress
  • Residual stresses
  • Stress concentration
  • shock
  10 Citations (Scopus)

  205 Downloads (Pure)

• Characterization and application of Bragg-edge transmission imaging for strain measurement and crystallographic analysis on the IMAT beamline

  Ramadhan, R. S., Kockelmann, W., Minniti, T., Chen, B., Parfitt, D., Fitzpatrick, M. E. & Tremsin, A. S., 1 Apr 2019, In: Journal of Applied Crystallography. 52, 2, p. 351-368 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Lattice constants
  • Strain measurement
  • Textures
  • Imaging techniques
  • Spectral resolution
  7 Citations (Scopus)

  45 Downloads (Pure)

• Describing oxygen self-diffusion in PuO2 by connecting point defect parameters with bulk properties

  Chroneos, A., Fitzpatrick, M. E. & Tsoukalas, L. H., 2015, In: Journal of Materials Science: Materials in Electronics. 26, 5, p. 3287-3290

  Research output: Contribution to journal › Article

  Open Access

  File

  • Point defects
  • point defects
  • Oxygen
  • oxygen
  • nuclear fuels
  14 Citations (Scopus)

  24 Downloads (Pure)

• Determination of multiple near-surface residual stress components in laser peened aluminium alloy via the contour method

  Toparli, M. B., Fitzpatrick, M. E. & Gungor, S., 2015, In: Metallurgical and Materials Transactions A. 46, 9, p. 4268-4275

  Research output: Contribution to journal › Article

  Open Access

  File

  • aluminum alloys
  • residual stress
  • Aluminum alloys
  • Residual stresses
  • Lasers
  7 Citations (Scopus)

  31 Downloads (Pure)

• Determination of normal and shear residual stresses from fracture surface mismatch

  Araujo de Oliveira, J., Kowal, J., Gungor, S. & Fitzpatrick, M. E., 2015, In: Materials & Design. 83, p. 176-184

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shear stress
  • Residual stresses
  • Plasticity
  • Stress measurement
  • Forging
  5 Citations (Scopus)

  81 Downloads (Pure)

• Development and application of the contour method to determine the residual stresses in thin laser-peened aluminium alloy plates

  Toparli, M. B. & Fitzpatrick, M. E., 8 Oct 2015, In: Experimental Mechanics. 56, 2, p. 323-330

  Research output: Contribution to journal › Article

  Open Access

  File

  • Aluminum alloys
  • Residual stresses
  • Lasers
  • Splines
  • Glues
  11 Citations (Scopus)

  100 Downloads (Pure)

• Effect of frequency on high-temperature fatigue crack growth in a silicon carbide reinforced silicon nitride composite

  Moffatt, J. E., Fitzpatrick, M. E. & Edwards, L., Feb 2013, In: International Journal of Fatigue. 47, February 2013, p. 319-329

  Research output: Contribution to journal › Article

  Open Access

  • Silicon Nitride
  • Fatigue Crack Growth
  • silicon nitride
  • silicon carbide
  • Silicon
  7 Citations (Scopus)

• Effect of grain size on domain structures, dielectric and thermal depoling of Nd-substituted bismuth titanate ceramics

  Viola, G., Boon Chong, K., Eriksson, M., Shen, Z., Zeng, J., Yin, Q., Kan, Y., Wang, P., Ning, H., Zhang, H., Fitzpatrick, M. E., Reece, M. J. & Yan, H., 2013, In: Applied Physics Letters. 103, 182903 (

  Research output: Contribution to journal › Article

  Open Access

  • titanates
  • bismuth
  • grain size
  • ceramics
  • domain wall
  23 Citations (Scopus)

• Effect of impact damage on fatigue performance of structures reinforced with GLARE bonded crack retarders

  Syed, A. K., Fitzpatrick, M. E., Moffatt, J. E., Doucet, J. & Durazo-Cardenas, I., 2015, In: International Journal of Fatigue. 80, p. 231-237 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue
  • Damage
  • Crack
  • Fatigue of materials
  • Cracks
  7 Citations (Scopus)

  33 Downloads (Pure)

• Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects

  Dorman, M., Toparli, M. B., Smyth, N., Cini, A., Fitzpatrick, M. E. & Irving, P. E., 30 Jun 2012, In: Materials Science and Engineering: A. 528, p. 142-151 10 p.

  Research output: Contribution to journal › Article

  • peening
  • fatigue life
  • Aluminum sheet
  • Shot peening
  • residual stress
  70 Citations (Scopus)

• Effect of Overlapping of Peen Spots on Residual Stresses in Laser-Peened Aluminium Sheets

  Toparli, M. B. & Fitzpatrick, M. E., 15 Mar 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 3, p. 1109-1112 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Aluminum sheet
  • peening
  • Shot peening
  • residual stress
  • Residual stresses
  4 Citations (Scopus)

• Effect of residual stress on the nanoindentation response of aerospace aluminium alloys

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 50, 10, p. 2967-2976 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Residual Stress
  • nanoindentation
  • aluminum alloys
  35 Citations (Scopus)

• Effect of Thermal Residual Stresses on Bonded Structures Containing Cold Expanded and Bolted Holes

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., 2014, In: Advanced Materials Research. 996, Chapter II. Manufacturing and Materials Processing, p. 682-687

  Research output: Contribution to journal › Article

  Open Access

  • Thermal stress
  • Residual stresses
  • Neutron diffraction
  • Stress measurement
  • Compressive stress
  4 Citations (Scopus)

• Effect of ultrasonic peening and accelerated corrosion exposure on the residual stress distribution in welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 3, p. 1214-1226

  Research output: Contribution to journal › Article › peer-review

  File

  • peening
  • Shot peening
  • Steel
  • stress distribution
  • residual stress
  10 Citations (Scopus)

  64 Downloads (Pure)

• Energy-Efficient Machining Process Analysis and Optimisation Based on BS EN24T Alloy Steel as Case Studies

  Caires Moreira, L., Li, W., Lu, X. & Fitzpatrick, M., Aug 2019, In: Robotics and Computer-Integrated Manufacturing. 58, p. 1-12 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Energy Efficient
  • Machining
  • Steel
  • Alloy steel
  • Optimization
  6 Citations (Scopus)

  34 Downloads (Pure)

• Evolution of residual stress during fatigue crack growth in an aluminium specimen with a bonded crack retarder

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., Nov 2014, In: Composite Structures. 117, p. 12-16

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum
  • Fatigue crack propagation
  • Residual stresses
  • Cracks
  • Stress measurement
  5 Citations (Scopus)

  35 Downloads (Pure)

• Experimental study of room-temperature indentation viscoplastic ‘creep’ in zirconium

  Storer, S. C., Fitzpatrick, M. E., Hainsworth, S. V. & Rist, M. A., 2016, In: Philosophical Magazine. 96, 24, p. 2547-2563

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • nanoindentation
  • indentation
  • strain rate
  • room temperature
  • creep tests
  5 Citations (Scopus)

  37 Downloads (Pure)

• Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride

  Bacon, D. H., Edwards, L., Mofffatt, J. E. & Fitzpatrick, M. E., Mar 2013, In: International Journal of Fatigue. 48, 2013, p. 39-47

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • titanium boride
  • Metal Matrix Composites
  • Stainless Steel
  • Titanium
  • Fatigue
  31 Citations (Scopus)

• Fatigue crack growth in a laser shock peened residual stress field

  Pavan, M., Furfari, D., Ahmad, B., Gharghouri, M. A. & Fitzpatrick, M. E., 1 Jun 2019, In: International Journal of Fatigue. 123, p. 157-167 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue Crack Growth
  • Residual Stress
  • Laser
  • Stress Field
  • Fatigue Life
  25 Citations (Scopus)

  16 Downloads (Pure)

• Fatigue performance of friction stir welded marine grade steel

  Polezhayeva, H., Toumpis, A. I., Galloway, A. M., Molter, L., Ahmed, B. & Fitzpatrick, M. E., 13 Aug 2015, In: International Journal of Fatigue. 81, p. 162–170

  Research output: Contribution to journal › Article

  Open Access

  File

  • Fatigue
  • Steel
  • Friction Stir Welding
  • Friction
  • S-N Curve
  9 Citations (Scopus)

  89 Downloads (Pure)

• Germanium diffusion in aluminium: connection between point defect parameters with bulk properties

  Ganniari-Papageorgiou, E., Fitzpatrick, M. E. & Chroneos, A., 28 Jul 2015, In: Journal of Materials Science: Materials in Electronics. 26, 11, p. 8421-8424

  Research output: Contribution to journal › Article

  Open Access

  File

  • Germanium
  • Point defects
  • Aluminum
  • point defects
  • germanium
  6 Citations (Scopus)

  17 Downloads (Pure)

• High strain-rate material model validation for laser peening simulation

  Langer, K., Olson, S., Brockman, R., Braisted, W., Spradlin, T. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. September 2015

  Research output: Contribution to journal › Article

  Open Access

  File

  • Shot peening
  • Strain rate
  • Lasers
  • Compression testing
  • Residual stresses
  78 Downloads (Pure)

• Improvement of the Contour Method for Measurement of Near-Surface Residual Stresses from Laser Peening

  Torpali, M. B., Fitzpatrick, M. E. & Gungor, S., May 2013, In: Experimental Mechanics. 53, 9, p. 1705-1718

  Research output: Contribution to journal › Article

  Open Access

  • Shot peening
  • Residual stresses
  • Lasers
  • X ray diffraction
  • Splines
  27 Citations (Scopus)

• Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

  Zeybek, A., Barroso, S. P., Chong, K. B., Edwards, L. & Fitzpatrick, M., Jun 2014, In: Journal of Materials Engineering and Performance. In press

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • yttria
  • Yttrium oxide
  • Ferritic stainless steel
  • Powder metallurgy
  • Neutron scattering
  7 Citations (Scopus)

  20 Downloads (Pure)