Find Research outputs

Search results

• Article

  A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 49, 4, p. 751-760 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Mechanical Properties
  • Mechanical testing
  • nanoindentation
  39 Citations (Scopus)

• A comparison of fatigue crack growth performance of two aerospace grade aluminium alloys reinforced with bonded crack retarders

  Syed, A., Zhang, X. & Fitzpatrick, M., May 2018, In: Fatigue and Fracture of Engineering Materials and Structures. 41, 5, p. 1237-1242

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue crack propagation
  • Aluminum alloys
  • Cracks
  • Fatigue of materials
  • Stress intensity factors
  2 Citations (Scopus)

  35 Downloads (Pure)

• A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings

  Ahmed, R., Fitzpatrick, M. E. & Faisal, N. H., 25 May 2012, In: Surface and Coatings Technology. 206, 19-20, p. 4180-4185 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutron diffraction
  • Sprayed coatings
  • sprayed coatings
  • Strain measurement
  • strain measurement
  16 Citations (Scopus)

• Anelasticity in austenitic stainless steel

  Ashwin Rao, P., Bouchard, J., Northover, S. M. & Fitzpatrick, M. E., Nov 2012, In: Acta Materialia. 60, 19, p. 6851–6861

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Austenitic stainless steel
  • Creep
  • Neutron diffraction
  • Unloading
  • Strain rate
  22 Citations (Scopus)

• A new bridge technique for neutron tomography and diffraction measurements

  Burca, G., James, J. A., Kockelmann, W., Fitzpatrick, M. E., Zhang, S. Y., Hovind, J. & Van Langh, R., 21 Sep 2011, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 651, 1, p. 229-235 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutrons
  • Diffraction
  • Tomography
  • tomography
  • neutrons
  10 Citations (Scopus)

• An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels

  Zhang, H., Gorley, M. J., Boon Chong, K., Fitzpatrick, M. E., Roberts, S. G. & Grant, P. S., 5 Jan 2014, In: Journal of Alloys and Compounds. 582, 2014, p. 769-773

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Neutron powder diffraction
  • Oxides
  • Ferritic stainless steel
  • Precipitates
  • Annealing
  20 Citations (Scopus)

• Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches

  Khan, K., Fitzpatrick, M., Hainsworth, S., Evans, A. D. & Edwards, L., 2011, In: Acta Materialia. 59, 20, p. 7508-7520 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Nanoindentation
  • X ray diffraction
  • Residual stresses
  • Diffraction
  27 Citations (Scopus)

• Application of the eigenstrain approach to predict the residual stress distribution in laser shock peened AA7050-T7451 samples

  Coratella, S., Sticchi, M., Toparli, M. B., Fitzpatrick, M. E. & Kashaev, K., 15 Jul 2015, In: Surface and Coatings Technology. 273, p. 39-49

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • stress distribution
  • residual stress
  • Residual stresses
  • Stress concentration
  • shock
  11 Citations (Scopus)

  217 Downloads (Pure)

• Automotive Magneto-Rheological Dampers: Modelling and Parameter Identification using contrast-based Fruit Fly Optimisation

  Kanarachos, S., Savitski, D., Lagaros, N. & Fitzpatrick, M. E., Dec 2018, In: Soft Computing. 22, 24, p. 8131–8149 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Magnetorheological Damper
  • Fruit
  • Parameter Identification
  • Fruits
  • Damper
  4 Citations (Scopus)

  98 Downloads (Pure)

• Boundary Effects in the Eigenstrain Method

  Lee, S-Y., Coratella, S., Brügger, A., Clausen, B., Brown, D., Langer, K., Fitzpatrick, M. & Noyan, I. C., 15 Jun 2018, In: Experimental Mechanics. 58, 5, p. 799-814 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Neutron diffraction
  • Geometry
  • Thermal expansion
  • Residual stresses
  • Stress concentration
  1 Citation (Scopus)

  30 Downloads (Pure)

• Defect process and lithium diffusion in Li₂TiO₃

  Kuganathan, N., Kordatos, A., Fitzpatrick, M. E., Vovk, R. V. & Chroneos, A., 1 Dec 2018, In: Solid State Ionics. 327, p. 93-98 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Vacancies
  • Lithium
  • lithium
  • Defects
  • defects
  26 Citations (Scopus)

• Describing oxygen self-diffusion in PuO2 by connecting point defect parameters with bulk properties

  Chroneos, A., Fitzpatrick, M. E. & Tsoukalas, L. H., 2015, In: Journal of Materials Science: Materials in Electronics. 26, 5, p. 3287-3290

  Research output: Contribution to journal › Article

  Open Access

  File

  • Point defects
  • point defects
  • Oxygen
  • oxygen
  • nuclear fuels
  14 Citations (Scopus)

  24 Downloads (Pure)

• Determination of multiple near-surface residual stress components in laser peened aluminium alloy via the contour method

  Toparli, M. B., Fitzpatrick, M. E. & Gungor, S., 2015, In: Metallurgical and Materials Transactions A. 46, 9, p. 4268-4275

  Research output: Contribution to journal › Article

  Open Access

  File

  • aluminum alloys
  • residual stress
  • Aluminum alloys
  • Residual stresses
  • Lasers
  7 Citations (Scopus)

  31 Downloads (Pure)

• Determination of normal and shear residual stresses from fracture surface mismatch

  Araujo de Oliveira, J., Kowal, J., Gungor, S. & Fitzpatrick, M. E., 15 Oct 2015, In: Materials & Design. 83, p. 176-184

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shear stress
  • Residual stresses
  • Plasticity
  • Stress measurement
  • Forging
  5 Citations (Scopus)

  82 Downloads (Pure)

• Development and application of the contour method to determine the residual stresses in thin laser-peened aluminium alloy plates

  Toparli, M. B. & Fitzpatrick, M. E., 8 Oct 2015, In: Experimental Mechanics. 56, 2, p. 323-330

  Research output: Contribution to journal › Article

  Open Access

  File

  • Aluminum alloys
  • Residual stresses
  • Lasers
  • Splines
  • Glues
  12 Citations (Scopus)

  103 Downloads (Pure)

• Effect of alloy temper on surface modification of aluminium 2624 by laser shock peening

  Zabeen, S., Langer, K. & Fitzpatrick, M. E., 15 Aug 2018, In: Surface and Coatings Technology. 347, p. 123-135 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • peening
  • Shot peening
  • Aluminum
  • Surface treatment
  • residual stress
  6 Citations (Scopus)

  10 Downloads (Pure)

• Effect of impact damage on fatigue performance of structures reinforced with GLARE bonded crack retarders

  Syed, A. K., Fitzpatrick, M. E., Moffatt, J. E., Doucet, J. & Durazo-Cardenas, I., Nov 2015, In: International Journal of Fatigue. 80, p. 231-237 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue
  • Damage
  • Crack
  • Fatigue of materials
  • Cracks
  7 Citations (Scopus)

  33 Downloads (Pure)

• Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects

  Dorman, M., Toparli, M. B., Smyth, N., Cini, A., Fitzpatrick, M. E. & Irving, P. E., 30 Jun 2012, In: Materials Science and Engineering: A. 528, p. 142-151 10 p.

  Research output: Contribution to journal › Article

  • peening
  • fatigue life
  • Aluminum sheet
  • Shot peening
  • residual stress
  71 Citations (Scopus)

• Effect of residual stress on the nanoindentation response of aerospace aluminium alloys

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 50, 10, p. 2967-2976 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Residual Stress
  • nanoindentation
  • aluminum alloys
  36 Citations (Scopus)

• Effect of texture on the residual stress response from laser peening of an aluminium-lithium alloy

  Zabeen, S., Langer, K. & Fitzpatrick, M. E., 1 Jan 2018, In: Journal of Materials Processing Technology. 251, p. 317-329 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Lithium alloys
  • Shot peening
  • Aluminum alloys
  • Residual stresses
  • Textures
  7 Citations (Scopus)

  80 Downloads (Pure)

• Effect of Thermal Residual Stresses on Bonded Structures Containing Cold Expanded and Bolted Holes

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., 2014, In: Advanced Materials Research. 996, Chapter II. Manufacturing and Materials Processing, p. 682-687

  Research output: Contribution to journal › Article

  Open Access

  • Thermal stress
  • Residual stresses
  • Neutron diffraction
  • Stress measurement
  • Compressive stress
  4 Citations (Scopus)

• Effect of ultrasonic nanocrystal surface modification on residual stress and fatigue cracking in engineering alloys

  Khan, K., Fitzpatrick, M., Wang, Q. Y., Pyoun, Y. S. & Amanov, A., Apr 2018, In: Fatigue and Fracture of Engineering Materials and Structures. 41, 4, p. 844-855 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Nanocrystals
  • Surface treatment
  • Residual stresses
  • Ultrasonics
  • Compressive stress
  17 Citations (Scopus)

  50 Downloads (Pure)

• Effect of ultrasonic peening and accelerated corrosion exposure on the residual stress distribution in welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 3, p. 1214-1226

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • peening
  • Shot peening
  • Steel
  • stress distribution
  • residual stress
  10 Citations (Scopus)

  65 Downloads (Pure)

• Energy-resolved neutron imaging for reconstruction of strain introduced by cold working

  Tremsin, A. S., Kockelmann, W., Kelleher, J. F., Paradowska, A. M., Ramadhan, R. S. & Fitzpatrick, M. E., 28 Feb 2018, In: Journal of Imaging. 4, 3, 12 p., 48.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Cold working
  • Neutrons
  • Aluminum
  • Cold Temperature
  • Imaging techniques
  5 Citations (Scopus)

  7 Downloads (Pure)

• Evolution of residual stress during fatigue crack growth in an aluminium specimen with a bonded crack retarder

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., Nov 2014, In: Composite Structures. 117, p. 12-16

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum
  • Fatigue crack propagation
  • Residual stresses
  • Cracks
  • Stress measurement
  5 Citations (Scopus)

  35 Downloads (Pure)

• Fatigue performance of friction stir welded marine grade steel

  Polezhayeva, H., Toumpis, A. I., Galloway, A. M., Molter, L., Ahmed, B. & Fitzpatrick, M. E., Dec 2015, In: International Journal of Fatigue. 81, p. 162–170

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue
  • Steel
  • Friction Stir Welding
  • Friction
  • S-N Curve
  9 Citations (Scopus)

  89 Downloads (Pure)

• Germanium diffusion in aluminium: connection between point defect parameters with bulk properties

  Ganniari-Papageorgiou, E., Fitzpatrick, M. E. & Chroneos, A., 28 Jul 2015, In: Journal of Materials Science: Materials in Electronics. 26, 11, p. 8421-8424

  Research output: Contribution to journal › Article

  Open Access

  File

  • Germanium
  • Point defects
  • Aluminum
  • point defects
  • germanium
  6 Citations (Scopus)

  17 Downloads (Pure)

• High strain-rate material model validation for laser peening simulation

  Langer, K., Olson, S., Brockman, R., Braisted, W., Spradlin, T. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. September 2015

  Research output: Contribution to journal › Article

  Open Access

  File

  • Shot peening
  • Strain rate
  • Lasers
  • Compression testing
  • Residual stresses
  78 Downloads (Pure)

• Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

  Zeybek, A., Barroso, S. P., Chong, K. B., Edwards, L. & Fitzpatrick, M., Jun 2014, In: Journal of Materials Engineering and Performance. In press

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • yttria
  • Yttrium oxide
  • Ferritic stainless steel
  • Powder metallurgy
  • Neutron scattering
  7 Citations (Scopus)

  20 Downloads (Pure)

• Intrinsic defect processes and elastic properties of Ti3AC2 (A = Al, Si, Ga, Ge, In, Sn) MAX phases

  Christopoulos, S., Filippatos, P-P., Hadi, M. A., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 14 Jan 2018, In: Journal of Applied Physics. 123, 2, 025103.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • elastic properties
  • defects
  • nuclear fuels
  • operating temperature
  • transition metals
  18 Citations (Scopus)

  89 Downloads (Pure)

• Mapping residual strain induced by cold working and by laser shock peening using neutron transmission spectroscopy

  Ramadhan, R. S., Syed, A. K., Tremsin, A. S., Kockelmann, W., Dalgliesh, R., Chen, B., Parfitt, D. & Fitzpatrick, M. E., 5 Apr 2018, In: Materials and Design. 143, p. 56-64 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Cold working
  • Shot peening
  • Spectroscopy
  • Neutrons
  • Lasers
  11 Citations (Scopus)

  24 Downloads (Pure)

• Measurement and Modelling of Residual Stress in Wire-Feed Additively Manufactured Titanium

  Ahmed, B., van der Veen, S., Fitzpatrick, M. & Guo, H., 2018, In: Materials Science and Technology. 34, 18, p. 2250-2259 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Titanium
  • residual stress
  • Residual stresses
  • titanium
  • Wire
  6 Citations (Scopus)

  14 Downloads (Pure)

• Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis

  Meixner, M., Fitzpatrick, M. E. & Reimers, W., 17 Jan 2011, In: Composites Science and Technology. 71, 2, p. 167-176 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • X ray diffraction analysis
  • Magnesium
  • Compaction
  • Composite materials
  12 Citations (Scopus)

• Modelling oxygen self-diffusion in UO2 under pressure

  Cooper, M. W. D., Grimes, R. W., Fitzpatrick, M. E. & Chroneos, A., 1 Dec 2015, In: Solid State Ionics. 282, p. 26-30

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Oxygen
  • oxygen
  • Hydrostatic pressure
  • nuclear fuels
  • Nuclear fuels
  37 Citations (Scopus)

  33 Downloads (Pure)

• Optimal design of a quadratic parameter varying vehicle suspension system using contrast-based Fruit Fly Optimisation

  Kanarachos, S., Dizqah, A. M., Chrysakis, G. & Fitzpatrick, M. E., 1 Jan 2018, In: Applied Soft Computing. 62, p. 463-477 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Vehicle suspensions
  • Fruits
  • Global optimization
  • Brain
  • Damping
  24 Citations (Scopus)

  160 Downloads (Pure)

• Physical properties and defect processes of M3SnC2 (M = Ti, Zr, Hf) MAX phases: Effect of M-elements

  Hadi, M. A., Christopoulos, S., Naqib, S. H., Chroneos, A., Fitzpatrick, M. & Islam, A. K. M. A., 5 Jun 2018, In: Journal of Alloys and Compounds. 748, p. 804-813 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fermi surface
  • Debye temperature
  • Lattice constants
  • Electronic density of states
  • Physical properties
  22 Citations (Scopus)

  32 Downloads (Pure)

• Prediction of welding residual stresses using machine learning: Comparison between neural networks and neuro-fuzzy systems

  Mathew, J., Griffin, J., Alamaniotis, M., Kanarachos, S. & Fitzpatrick, M., Sep 2018, In: Applied Soft Computing. 70, p. 131-146 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fuzzy systems
  • Residual stresses
  • Welding
  • Machine learning
  • Neural networks
  23 Citations (Scopus)

  142 Downloads (Pure)

• Probabilistic kernel machines for predictive monitoring of weld residual stress in energy systems

  Alamaniotis, M., Mathew, J., Chroneos, A., Fitzpatrick, M. & Tsoukolas, L., May 2018, In: Engineering Applications of Artificial Intelligence. 71, p. 138-154 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Residual stresses
  • Welds
  • Linear regression
  • Steel pipe
  • Monitoring
  6 Citations (Scopus)

  26 Downloads (Pure)

• Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction

  Ganguly, S., Edwards, L. & Fitzpatrick, M. E., 25 Jan 2011, In: Materials Science and Engineering A. 528, 3, p. 1226-1232 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Diffraction
  • welding
  • residual stress
  • Residual stresses
  • Welding
  20 Citations (Scopus)

• Reactor pressure vessel embrittlement: Insights from neural network modelling

  Mathew, J., Parfitt, D., Wilford, K., Riddle, N., Alamaniotis, M., Chroneos, A. & Fitzpatrick, M. E., 15 Apr 2018, In: Journal of Nuclear Materials. 502, p. 311-322 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • pressure vessels
  • Embrittlement
  • embrittlement
  • Pressure vessels
  • reactors
  9 Citations (Scopus)

  32 Downloads (Pure)

• Research on energy consumption and energy efficiency of machine tools: a comprehensive survey

  Caires Moreira, L., Li, W., Fitzpatrick, M., Lu, X. & Li, X., 2018, In: International Journal of Nanomanufacturing. 14, 2, p. 140-164 25 p.

  Research output: Contribution to journal › Article › peer-review

  • Machine tools
  • Energy efficiency
  • Energy utilization
  • Sustainable development
  • Climate change
  2 Citations (Scopus)

• Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling

  Honnige, J. R., Colegrove, P. A., Ahmed, B., Fitzpatrick, M., Ganguly, S., Lee, T. L. & Williams, S. W., 15 Jul 2018, In: Materials & Design. 150, p. 193-205 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress relief
  • Residual stresses
  • Textures
  • Wire
  • Neutron diffraction
  55 Citations (Scopus)

  39 Downloads (Pure)

• Residual Stresses in Ultrasonically Peened Fillet Welded Joints

  Ahmed, B. & Fitzpatrick, M. E., Aug 2014, In: Advanced Materials Research. 996, Chapter III. Materials and Structures, p. 755-760

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Residual stresses
  • Welds
  • Neutron diffraction
  • Fatigue of materials
  • Shot peening
  2 Citations (Scopus)

• Residual Stress Evaluation in Selective-Laser-Melting Additively Manufactured Titanium (Ti-6Al-4V) and Inconel 718 using the Contour Method and Numerical Simulation

  Ahmed, B., van der Veen, S., Fitzpatrick, M. & Guo, H., Aug 2018, In: Additive Manufacturing. 22, p. 571-582 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Selective laser melting
  • Titanium
  • Residual stresses
  • Computer simulation
  • Titanium alloys
  37 Citations (Scopus)

  252 Downloads (Pure)

• Residual Stress Measurements on a Metal Matrix Composite Using the Contour Method with Brittle Fracture

  Araujo de Oliveira, J., Fitzpatrick, M. E. & Kowal, J., 2014, In: Advanced Materials Research. 996, Chapter I. Measurement Methods, p. 249-354

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stress measurement
  • Brittle fracture
  • Residual stresses
  • Metals
  • Composite materials
  3 Citations (Scopus)

• Robust Virtual Sensing for Vehicle Agile Manoeuvring: A Tyre-model-less Approach

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., Mar 2018, In: IEEE Transactions on Vehicular Technology. 67, 3, p. 1894-1908

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Tire
  • Sensing
  • Tires
  • Sensor
  • Driver
  10 Citations (Scopus)

  195 Downloads (Pure)

• Surface preparation for residual stress measurement of an accelerated corrosion tested welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Corrosion Science. 91, p. 357–360

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress measurement
  • Steel
  • Residual stresses
  • Corrosion
  • Neutron diffraction
  2 Citations (Scopus)

  113 Downloads (Pure)

• Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles

  Bacon, D. H., Edwards, L., Moffatt, J. E. & Fitzpatrick, M. E., 1 May 2011, In: Acta Materialia. 59, 9, p. 3373-3383 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Steel
  • X ray diffraction
  • Metals
  • Residual stresses
  31 Citations (Scopus)

• The effect of compressive fatigue loads on fatigue strength of non-load carrying specimens subjected to ultrasonic impact treatment

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmed, B. & Fitzpatrick, M. E., 2015, In: Welding in the World. 59, 5, p. 713-721

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compressive stress
  • Ultrasonics
  • Fatigue of materials
  • Ocean structures
  • Residual stresses
  9 Citations (Scopus)

• The effect of laser shock peening on hardness and microstructure in a welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. July 2015

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shot peening
  • Hardness
  • Lasers
  • Microstructure
  • Steel
  46 Downloads (Pure)