Find Research Outputs

Search results

• Article

  Residual stresses in aerospace structures reinforced with bonded crack retarders

  Syed, A. K., Fitzpatrick, M. E. & Moffatt, J. E., 2016, In: Journal of Strain Analysis for Engineering Design. 51, 2, p. 170-175

  Research output: Contribution to journal › Article

  Open Access

  File

  • Residual Stress
  • Crack
  • Residual stresses
  • Cracks
  • Fatigue
  1 Citation (Scopus)

  55 Downloads (Pure)

• Residual Stresses in Ultrasonically Peened Fillet Welded Joints

  Ahmed, B. & Fitzpatrick, M. E., Aug 2014, In: Advanced Materials Research. 996, Chapter III. Materials and Structures, p. 755-760

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Residual stresses
  • Welds
  • Neutron diffraction
  • Fatigue of materials
  • Shot peening
  2 Citations (Scopus)

• Residual Stress Measurements on a Metal Matrix Composite Using the Contour Method with Brittle Fracture

  Araujo de Oliveira, J., Fitzpatrick, M. E. & Kowal, J., 2014, In: Advanced Materials Research. 996, Chapter I. Measurement Methods, p. 249-354

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stress measurement
  • Brittle fracture
  • Residual stresses
  • Metals
  • Composite materials
  3 Citations (Scopus)

• Supervision Controller for Real-time Surface Quality Assurance in CNC Machining using Artificial Intelligence

  Caires Moreira, L., Li, W., Lu, X. & Fitzpatrick, M., Jan 2019, In: Computers & Industrial Engineering. 127, p. 158-168 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Quality assurance
  • Surface properties
  • Artificial intelligence
  • Machining
  • Controllers
  6 Citations (Scopus)

  40 Downloads (Pure)

• Surface preparation for residual stress measurement of an accelerated corrosion tested welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Corrosion Science. 91, p. 357–360

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress measurement
  • Steel
  • Residual stresses
  • Corrosion
  • Neutron diffraction
  2 Citations (Scopus)

  111 Downloads (Pure)

• Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles

  Bacon, D. H., Edwards, L., Moffatt, J. E. & Fitzpatrick, M. E., 1 May 2011, In: Acta Materialia. 59, 9, p. 3373-3383 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Steel
  • X ray diffraction
  • Metals
  • Residual stresses
  31 Citations (Scopus)

• TEM study of the effect of high-temperature thermal cycles on the stability of the Y-Al-O oxides in MA956 ODS steel

  Leo, J. R. O., Moturu, S. R. & Fitzpatrick, M. E., 1 Sep 2019, In: Journal of Materials Research and Technology. 8, 5, p. 3719-3725 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Oxides
  • Steel
  • Transmission electron microscopy
  • Hot Temperature
  • Temperature
  1 Citation (Scopus)

  10 Downloads (Pure)

• The effect of compressive fatigue loads on fatigue strength of non-load carrying specimens subjected to ultrasonic impact treatment

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmed, B. & Fitzpatrick, M. E., 2015, In: Welding in the World. 59, 5, p. 713-721

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compressive stress
  • Ultrasonics
  • Fatigue of materials
  • Ocean structures
  • Residual stresses
  9 Citations (Scopus)

• The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V

  Perumal, B., Rist, M. A., Gungor, S., Brooks, J. W. & Fitzpatrick, M. E., Aug 2016, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 8, p. 4128-4136 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • forging
  • Hot working
  • Forging
  • hot working
  • Microstructure
  15 Citations (Scopus)

  23 Downloads (Pure)

• The effect of laser shock peening on hardness and microstructure in a welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. July 2015

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shot peening
  • Hardness
  • Lasers
  • Microstructure
  • Steel
  46 Downloads (Pure)

• The effect of material cyclic deformation properties on residual stress generation by laser shock processing

  Angulo, I., Cordovilla, F., García-Beltrán, A., Smyth, N. S., Langer, K., Fitzpatrick, M. E. & Ocaña, J. L., 1 Jun 2019, In: International Journal of Mechanical Sciences. 156, p. 370-381 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • residual stress
  • Residual stresses
  • shock
  • Lasers
  • lasers
  6 Citations (Scopus)

  16 Downloads (Pure)

• Thermodynamic calculations of oxygen self-diffusion in mixed-oxide nuclear fuels

  Parfitt, D. C., Cooper, M. W. D., Rushton, M. J. D., Christopoulos, S-R. G., Fitzpatrick, M. E. & Chroneos, A., 29 Jul 2016, In: RSC Advances. 6, p. 74018-74027 10 p.

  Research output: Contribution to journal › Article

  Open Access

  File

  • Mixed oxide fuels
  • uranium dioxide
  • Thorium
  • Thermodynamics
  • Oxygen
  10 Citations (Scopus)

  28 Downloads (Pure)

• Through Thickness Residual Stress Measurements by Neutron Diffraction and Hole Drilling in a Single Laser-Peened Spot on a Thin Aluminium Plate

  Burak Toparli, M. & Fitzpatrick, M. E., 2014, In: Materials Science Forum. 772, p. 167-172 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutron diffraction
  • Stress measurement
  • stress measurement
  • drilling
  • Aluminum
  3 Citations (Scopus)
• Chapter

  Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening

  Coratella, S., Toparli, M. B. & Fitzpatrick, M. E., Sep 2013, Materials Science Forum. Trans Tech Publications, Vol. 768-769. p. 185-192

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Shot peening
  • Residual stresses
  • Lasers
  • Finite element method
  • Mechanical engineering
  2 Citations (Scopus)

• Atomic force microscopy (AFM) for materials characterization

  Khan, M. K., Wang, Q. Y. & Fitzpatrick, M. E., 2016, Materials Characterization Using Nondestructive Evaluation (NDE) Methods. Huebschen, G., Altpeter, I., Tschuncky, R. & Herrmann, H-G. (eds.). London: Woodhead Publishing, p. 1-16

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • atomic force microscopy
  • characterization
  • liquid air
  • stiffness
  • spatial resolution
  4 Citations (Scopus)

• Insight on the inconsistencies of Barkhausen signal measurements for radiation damage on nuclear reactor steel

  Pirfo Barroso, S., Fizpatrick, M. E., Gillemot, F., Horváth, M. & Szekely, R., 2014, AIP Conference Proceedings. AIP, Vol. 1581. p. 1229

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Radiation damage
  • Magnetic variables measurement
  • Nuclear reactors
  • Irradiation
  • Steel
  1 Citation (Scopus)

• Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

  Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • aircraft structures
  • straps
  • retarders
  • durability
  • cracks
  8 Citations (Scopus)

• Nanostructural Metallic Materials-Nanoengineering and Nanomanufacturing

  Fitzpatrick, M. E., Caballero, F. G. & Van De Voorde, M. H., 30 Jan 2015, The Nano-Micro Interface: Bridging the Micro and Nano Worlds: Second Edition. Wiley, Vol. 1-2. p. 135-158 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  • Rare Earth Metals
  • Fabrication
  • Nanostructured materials
  • Rare earths
  • Alloying
• Conference proceeding

  Effect of Ultrasonic Peening on Fatigue Strength of Welded Marine Structures - Lloyd’s Register Research Programme

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmad, B. & Fitzpatrick, M. E., 2014, Unknown Host Publication.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

  1 Citation (Scopus)

• Neutron diffraction study of elastoplastic behaviour of Al/SiCp metal matrix composite during tensile loading and unloading

  Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Neutron diffraction
  • metal matrix composites
  • unloading
  • Unloading
  • neutron diffraction
  1 Citation (Scopus)

• Residual Stress Measurements and Fatigue Testing of Butt Welds Subjected to Peening Treatments

  Ahmad, B., Fitzpatrick, M. E., Howarth, D., Polezhayeva, H., Przydatek, J. & Robinson, A., 2013, Unknown Host Publication. International Institute of Welding

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

• Studies regarding corrosion mechanisms in zirconium alloys

  Preuss, M., Frankel, P., Lozano-Perez, S., Hudson, D., Polatidis, E., Ni, N., Wei, J., English, C., Storer, S., Chong, K. B., Fitzpatrick, M., Wang, P., Smith, J., Grovenor, C., Smith, G., Sykes, J., Cottis, B., Lyon, S., Hallstadius, L., Comstock, R. J. & 2 others, Ambard, A. & Blat-Yrieix, M., 1 Jan 2011, Zirconium in the Nuclear Industry: 16th International Symposium. Barbéris, P. & Limbäck, M. (eds.). ASTM International, p. 649-681 33 p. (ASTM Special Technical Publication; vol. 1529 STP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Zirconium alloys
  • Oxides
  • Corrosion
  • Metals
  • Trademarks
  29 Citations (Scopus)

• The development of stress in inclusions caused by plastic flow in the matrix of a two-phase composite and its effect on the relief of initial residual stress

  Griffiths, J. R., Davidson, C. J., Finlayson, T. R., Oliver, E. C., Wang, Q. & Fitzpatrick, M. E., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014. Engineers Australia, p. 788-795 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Plastic flow
  • Residual stresses
  • Composite materials
  • Thermal expansion
  • Thermal stress

• Vehicle Dynamics Virtual Sensing Using Unscented Kalman Filter: Simulations and Experiments in a Driver-in-the-loop setup

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., 18 Apr 2019, Informatics in Control, Automation and Robotics: 14th International Conference, ICINCO 2017 Madrid, Spain, July 26-28, 2017 Revised Selected Papers. Springer Verlag, p. 582-602 21 p. (Lecture Notes in Electrical Engineering; vol. 495).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Kalman filters
  • Tires
  • Active safety systems
  • Experiments
  • Chassis
• Paper

  Anomaly detection in time series data using a combination of wavelets, neural networks and Hilbert transform

  Kanarachos, S., Mathew, J., Chroneos, A. & Fitzpatrick, M. E., 2015.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Anomaly detection
  • Time series
  • Neural networks
  • Wavelet analysis
  • Structural health monitoring
  11 Citations (Scopus)

  277 Downloads (Pure)

• Spontaneous Fruit Fly Optimisation for truss weight minimisation: Performance evaluation based on the no free lunch theorem

  Onyekpe, U., Kanarachos, S. & Fitzpatrick, M. E., 24 Sep 2019.

  Research output: Contribution to conference › Paper › peer-review

  • Fruits
  • Tuning

• Use of Bonded Crack Retarders to Improve Damage Tolerance of Wing Covers

  Heinimann, M., Maziarz, R., Castelletti, L., Boscolo, M., Naik, V., Doucet, J., Irving, P., Zhang, X., Syed, A., Liljedahl, C. D. M., Fitzpatrick, M. E. & Moffatt, J. E., 2016, (Accepted/In press).

  Research output: Contribution to conference › Paper

  • retarders
  • wings
  • cracks
  • damage
  • residual stress
• Poster

  312 MAX phases: Nuclear applications of M3AlC2

  Christopoulos, S., Parfitt, D., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 4 Jul 2019.

  Research output: Contribution to conference › Poster
• Review article

  Residual strain and fracture response of Al ₂O ₃ coatings deposited via APS and HVOF techniques

  Ahmed, R., Faisal, N. H., Paradowska, A. M. & Fitzpatrick, M. E., 1 Jan 2012, In: Journal of Thermal Spray Technology. 21, 1, p. 23-40 18 p.

  Research output: Contribution to journal › Review article › peer-review

  • Plasmas
  • Coatings
  • coatings
  • air
  • Air
  14 Citations (Scopus)