Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Michael Fitzpatrick
Chapter

Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening

Coratella, S., Toparli, M. B. & Fitzpatrick, M. E., Sep 2013, Materials Science Forum. Trans Tech Publications, Vol. 768-769. p. 185-192

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
2 Citations (Scopus)

Atomic force microscopy (AFM) for materials characterization

Khan, M. K., Wang, Q. Y. & Fitzpatrick, M. E., 2016, Materials Characterization Using Nondestructive Evaluation (NDE) Methods. Huebschen, G., Altpeter, I., Tschuncky, R. & Herrmann, H-G. (eds.). London: Woodhead Publishing, p. 1-16

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
4 Citations (Scopus)

Insight on the inconsistencies of Barkhausen signal measurements for radiation damage on nuclear reactor steel

Pirfo Barroso, S., Fizpatrick, M. E., Gillemot, F., Horváth, M. & Szekely, R., 2014, AIP Conference Proceedings. AIP, Vol. 1581. p. 1229

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access

Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
8 Citations (Scopus)

Nanostructural Metallic Materials-Nanoengineering and Nanomanufacturing

Fitzpatrick, M. E., Caballero, F. G. & Van De Voorde, M. H., 30 Jan 2015, The Nano-Micro Interface: Bridging the Micro and Nano Worlds: Second Edition. Wiley, Vol. 1-2. p. 135-158 24 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Conference article

Residual stress redistribution during elastic shake down in welded plates

Chukkan, J. R., Wu, G., Fitzpatrick, M. E., Eren, E., Zhang, X. & Kelleher, J., 25 May 2018, In : MATEC Web of Conferences. 165, 6 p., 21004.

Research output: Contribution to journalConference article

Open Access
File
2 Citations (Scopus)
7 Downloads (Pure)
Conference proceeding

Accurate Virtual Sensing of Vertical Tire Forces for Enhanced Handling Dynamics

Acosta, M., Kanarachos, S. & Fitzpatrick, M., 18 Dec 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. IEEE

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

5 Citations (Scopus)

A hybrid hierarchical rally driver model for autonomous vehicle agile maneuvering on loose surfaces

Acosta, M., Kanarachos, S. & Fitzpatrick, M. E., 2017, ICINCO 2017 - Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics. SciTePress, Vol. 2. p. 216-225 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

9 Citations (Scopus)

A Virtual Sensor for Integral Tire Force Estimation using Tire Model-Less Approaches and Adaptive Unscented Kalman Filter

Acosta, M., Kanarachos, S. & Fitzpatrick, M. E., 26 Jul 2017, ICINCO 2017 - Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics. SciTePress, Vol. 1. p. 386-397 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

13 Citations (Scopus)

Effect of Ultrasonic Peening on Fatigue Strength of Welded Marine Structures - Lloyd’s Register Research Programme

Polezhayeva, H., Howarth, D., Kumar, M., Ahmad, B. & Fitzpatrick, M. E., 2014, Unknown Host Publication.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

1 Citation (Scopus)

Neutron diffraction study of elastoplastic behaviour of Al/SiCp metal matrix composite during tensile loading and unloading

Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

1 Citation (Scopus)

Neutron Transmission Strain Measurements on IMAT: Residual Strain Mapping in an AlSiCp Metal Matrix Composite

Ramadhan, R., Kockelmann, W., Tremsin, A. S. & Fitzpatrick, M., 20 Apr 2018, International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation: MECA SENS 2017. Materials Research Forum LLC, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
File
18 Downloads (Pure)

On full MAGV lateral dynamics exploitation: Autonomous Drift Control

Acosta, M., Kanarachos, S. & Fitzpatrick, M., 1 Mar 2018, 15th International Workshop on Advanced Motion Control (IEEE AMC2018), Tokyo . IEEE

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

1 Citation (Scopus)

Optimized Tire Force Estimation using Extended Kalman Filter and Fruit Fly Optimization

Kanarachos, S., Acosta, M. & Fitzpatrick, M., 18 Dec 2017, 43rd Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 4074-4079 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
File
2 Citations (Scopus)
109 Downloads (Pure)

Residual Stress Measurements and Fatigue Testing of Butt Welds Subjected to Peening Treatments

Ahmad, B., Fitzpatrick, M. E., Howarth, D., Polezhayeva, H., Przydatek, J. & Robinson, A., 2013, Unknown Host Publication. International Institute of Welding

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Studies regarding corrosion mechanisms in zirconium alloys

Preuss, M., Frankel, P., Lozano-Perez, S., Hudson, D., Polatidis, E., Ni, N., Wei, J., English, C., Storer, S., Chong, K. B., Fitzpatrick, M., Wang, P., Smith, J., Grovenor, C., Smith, G., Sykes, J., Cottis, B., Lyon, S., Hallstadius, L., Comstock, R. J. & 2 others, Ambard, A. & Blat-Yrieix, M., 1 Jan 2011, Zirconium in the Nuclear Industry: 16th International Symposium. Barbéris, P. & Limbäck, M. (eds.). ASTM International, p. 649-681 33 p. (ASTM Special Technical Publication; vol. 1529 STP).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

29 Citations (Scopus)

Supervision Control for Quality Assurance in Milling Processes

Caires Moreira, L., Lu, X., Li, W. & Fitzpatrick, M., 2017, 47th International Conference on Computers & Industrial Engineering 2017 (CIE47): How Digital Platforms and Industrial Engineering are Transforming Industry and Services. Computers and Industrial Engineering, p. 398-405 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
1 Citation (Scopus)

The development of stress in inclusions caused by plastic flow in the matrix of a two-phase composite and its effect on the relief of initial residual stress

Griffiths, J. R., Davidson, C. J., Finlayson, T. R., Oliver, E. C., Wang, Q. & Fitzpatrick, M. E., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014. Engineers Australia, p. 788-795 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Vehicle Dynamics Virtual Sensing Using Unscented Kalman Filter: Simulations and Experiments in a Driver-in-the-loop setup

Acosta, M., Kanarachos, S. & Fitzpatrick, M., 18 Apr 2019, Informatics in Control, Automation and Robotics: 14th International Conference, ICINCO 2017 Madrid, Spain, July 26-28, 2017 Revised Selected Papers. Springer Verlag, p. 582-602 21 p. (Lecture Notes in Electrical Engineering; vol. 495).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Editorial

Effect of Treatment Area on Residual Stress and Fatigue in Laser Peened Aluminum Sheets

Toparli, M. B., Smyth, N. & Fitzpatrick, M. E., Apr 2017, In : Metallurgical and Materials Transactions A. 48, 4, p. 1519-1523

Research output: Contribution to journalEditorial

Open Access
2 Citations (Scopus)
Paper

A Hybrid Hierarchical Rally Driver Model for Autonomous Vehicle Agile

Kanarachos, S., Acosta, M. & Fitzpatrick, M., 26 Jul 2017. 10 p.

Research output: Contribution to conferencePaper

Open Access
File
11 Citations (Scopus)
272 Downloads (Pure)

Use of Bonded Crack Retarders to Improve Damage Tolerance of Wing Covers

Heinimann, M., Maziarz, R., Castelletti, L., Boscolo, M., Naik, V., Doucet, J., Irving, P., Zhang, X., Syed, A., Liljedahl, C. D. M., Fitzpatrick, M. E. & Moffatt, J. E., 2016, (Accepted/In press).

Research output: Contribution to conferencePaper

Poster

312 MAX phases: Nuclear applications of M3AlC2

Christopoulos, S., Parfitt, D., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 4 Jul 2019.

Research output: Contribution to conferencePoster

Review article

Residual strain and fracture response of Al 2O 3 coatings deposited via APS and HVOF techniques

Ahmed, R., Faisal, N. H., Paradowska, A. M. & Fitzpatrick, M. E., 1 Jan 2012, In : Journal of Thermal Spray Technology. 21, 1, p. 23-40 18 p.

Research output: Contribution to journalReview article

14 Citations (Scopus)