Find Research Outputs

Search results

• Vehicle Dynamics Virtual Sensing Using Unscented Kalman Filter: Simulations and Experiments in a Driver-in-the-loop setup

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., 18 Apr 2019, Informatics in Control, Automation and Robotics: 14th International Conference, ICINCO 2017 Madrid, Spain, July 26-28, 2017 Revised Selected Papers. Springer Verlag, p. 582-602 21 p. (Lecture Notes in Electrical Engineering; vol. 495).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Kalman filters
  • Tires
  • Active safety systems
  • Experiments
  • Chassis

• Through Thickness Residual Stress Measurements by Neutron Diffraction and Hole Drilling in a Single Laser-Peened Spot on a Thin Aluminium Plate

  Burak Toparli, M. & Fitzpatrick, M. E., 2014, In: Materials Science Forum. 772, p. 167-172 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutron diffraction
  • Stress measurement
  • stress measurement
  • drilling
  • Aluminum
  3 Citations (Scopus)

• The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation

  Simm, T. H., Das, Y. B., Forsey, A. N., Gungor, S., Fitzpatrick, M. E., Prakash, D. G. L., Moat, R. J., Birosca, S., Quinta da Fonseca, J. & Perkins, K. M., Feb 2020, In: Materials Characterization. 160, 110114.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Plastic deformation
  • plastic deformation
  • poles
  • Poles
  • plots

• The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel

  Das, Y. B., Forsey, A. N., Kelleher, J., Kabra, S., Fitzpatrick, M. E., Simm, T. H., Gungor, S. & Moat, R. J., 22 Nov 2018, In: Materials Science and Technology (United Kingdom). 34, 17, p. 2114-2125 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Martensitic transformations
  • Martensite
  • martensitic transformation
  • Austenitic stainless steel
  • stainless steels
  3 Citations (Scopus)

• The effect of material cyclic deformation properties on residual stress generation by laser shock processing

  Angulo, I., Cordovilla, F., García-Beltrán, A., Smyth, N. S., Langer, K., Fitzpatrick, M. E. & Ocaña, J. L., 1 Jun 2019, In: International Journal of Mechanical Sciences. 156, p. 370-381 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • residual stress
  • Residual stresses
  • shock
  • Lasers
  • lasers
  6 Citations (Scopus)

  16 Downloads (Pure)

• The effect of laser shock peening on hardness and microstructure in a welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. July 2015

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shot peening
  • Hardness
  • Lasers
  • Microstructure
  • Steel
  46 Downloads (Pure)

• The effect of compressive fatigue loads on fatigue strength of non-load carrying specimens subjected to ultrasonic impact treatment

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmed, B. & Fitzpatrick, M. E., 2015, In: Welding in the World. 59, 5, p. 713-721

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compressive stress
  • Ultrasonics
  • Fatigue of materials
  • Ocean structures
  • Residual stresses
  9 Citations (Scopus)

• The development of stress in inclusions caused by plastic flow in the matrix of a two-phase composite and its effect on the relief of initial residual stress

  Griffiths, J. R., Davidson, C. J., Finlayson, T. R., Oliver, E. C., Wang, Q. & Fitzpatrick, M. E., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014. Engineers Australia, p. 788-795 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Plastic flow
  • Residual stresses
  • Composite materials
  • Thermal expansion
  • Thermal stress

• TEM study of the effect of high-temperature thermal cycles on the stability of the Y-Al-O oxides in MA956 ODS steel

  Leo, J. R. O., Moturu, S. R. & Fitzpatrick, M. E., 1 Sep 2019, In: Journal of Materials Research and Technology. 8, 5, p. 3719-3725 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Oxides
  • Steel
  • Transmission electron microscopy
  • Hot Temperature
  • Temperature
  1 Citation (Scopus)

  10 Downloads (Pure)

• Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles

  Bacon, D. H., Edwards, L., Moffatt, J. E. & Fitzpatrick, M. E., 1 May 2011, In: Acta Materialia. 59, 9, p. 3373-3383 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Steel
  • X ray diffraction
  • Metals
  • Residual stresses
  31 Citations (Scopus)

• Surface preparation for residual stress measurement of an accelerated corrosion tested welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Corrosion Science. 91, p. 357–360

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress measurement
  • Steel
  • Residual stresses
  • Corrosion
  • Neutron diffraction
  2 Citations (Scopus)

  111 Downloads (Pure)

• Supervision Controller for Real-time Surface Quality Assurance in CNC Machining using Artificial Intelligence

  Caires Moreira, L., Li, W., Lu, X. & Fitzpatrick, M., Jan 2019, In: Computers & Industrial Engineering. 127, p. 158-168 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Quality assurance
  • Surface properties
  • Artificial intelligence
  • Machining
  • Controllers
  6 Citations (Scopus)

  40 Downloads (Pure)

• Studies regarding corrosion mechanisms in zirconium alloys

  Preuss, M., Frankel, P., Lozano-Perez, S., Hudson, D., Polatidis, E., Ni, N., Wei, J., English, C., Storer, S., Chong, K. B., Fitzpatrick, M., Wang, P., Smith, J., Grovenor, C., Smith, G., Sykes, J., Cottis, B., Lyon, S., Hallstadius, L., Comstock, R. J. & 2 others, Ambard, A. & Blat-Yrieix, M., 1 Jan 2011, Zirconium in the Nuclear Industry: 16th International Symposium. Barbéris, P. & Limbäck, M. (eds.). ASTM International, p. 649-681 33 p. (ASTM Special Technical Publication; vol. 1529 STP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Zirconium alloys
  • Oxides
  • Corrosion
  • Metals
  • Trademarks
  29 Citations (Scopus)

• Spontaneous Fruit Fly Optimisation for truss weight minimisation: Performance evaluation based on the no free lunch theorem

  Onyekpe, U., Kanarachos, S. & Fitzpatrick, M. E., 24 Sep 2019.

  Research output: Contribution to conference › Paper › peer-review

  • Fruits
  • Tuning

• Robust Virtual Sensing for Vehicle Agile Manoeuvring: A Tyre-model-less Approach

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., Mar 2018, In: IEEE Transactions on Vehicular Technology. 67, 3, p. 1894-1908

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Tire
  • Sensing
  • Tires
  • Sensor
  • Driver
  10 Citations (Scopus)

  187 Downloads (Pure)

• Residual stress redistribution during elastic shake down in welded plates

  Chukkan, J. R., Wu, G., Fitzpatrick, M. E., Eren, E., Zhang, X. & Kelleher, J., 25 May 2018, In: MATEC Web of Conferences. 165, 6 p., 21004.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  File

  • Residual stresses
  • Ships
  • Welding
  • Welds
  • Neutron diffraction
  3 Citations (Scopus)

  10 Downloads (Pure)

• Residual Stress Measurements on a Metal Matrix Composite Using the Contour Method with Brittle Fracture

  Araujo de Oliveira, J., Fitzpatrick, M. E. & Kowal, J., 2014, In: Advanced Materials Research. 996, Chapter I. Measurement Methods, p. 249-354

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stress measurement
  • Brittle fracture
  • Residual stresses
  • Metals
  • Composite materials
  3 Citations (Scopus)

• Residual Stress Measurements and Fatigue Testing of Butt Welds Subjected to Peening Treatments

  Ahmad, B., Fitzpatrick, M. E., Howarth, D., Polezhayeva, H., Przydatek, J. & Robinson, A., 2013, Unknown Host Publication. International Institute of Welding

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

• Residual Stress Evaluation in Selective-Laser-Melting Additively Manufactured Titanium (Ti-6Al-4V) and Inconel 718 using the Contour Method and Numerical Simulation

  Ahmed, B., van der Veen, S., Fitzpatrick, M. & Guo, H., Aug 2018, In: Additive Manufacturing. 22, p. 571-582 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Selective laser melting
  • Titanium
  • Residual stresses
  • Computer simulation
  • Titanium alloys
  37 Citations (Scopus)

  237 Downloads (Pure)

• Residual Stresses in Ultrasonically Peened Fillet Welded Joints

  Ahmed, B. & Fitzpatrick, M. E., Aug 2014, In: Advanced Materials Research. 996, Chapter III. Materials and Structures, p. 755-760

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Residual stresses
  • Welds
  • Neutron diffraction
  • Fatigue of materials
  • Shot peening
  2 Citations (Scopus)

• Residual stresses induced by laser shock peening in orthopaedic Ti-6Al-7Nb alloy

  Shen, X., Shukla, P., Subramaniyan, A. K., Zammit, A., Swanson, P., Lawrence, J. & Fitzpatrick, M. E., Nov 2020, In: Optics and Laser Technology. 131, 106446.

  Research output: Contribution to journal › Article › peer-review

  • Ti-6Al-7Nb alloy
  • peening
  • orthopedics
  • Shot peening
  • Orthopedics
  2 Citations (Scopus)

• Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling

  Honnige, J. R., Colegrove, P. A., Ahmed, B., Fitzpatrick, M., Ganguly, S., Lee, T. L. & Williams, S. W., 15 Jul 2018, In: Materials & Design. 150, p. 193-205 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress relief
  • Residual stresses
  • Textures
  • Wire
  • Neutron diffraction
  51 Citations (Scopus)

  34 Downloads (Pure)

• Residual strain and fracture response of Al ₂O ₃ coatings deposited via APS and HVOF techniques

  Ahmed, R., Faisal, N. H., Paradowska, A. M. & Fitzpatrick, M. E., 1 Jan 2012, In: Journal of Thermal Spray Technology. 21, 1, p. 23-40 18 p.

  Research output: Contribution to journal › Review article › peer-review

  • Plasmas
  • Coatings
  • coatings
  • air
  • Air
  14 Citations (Scopus)

• Research on energy consumption and energy efficiency of machine tools: a comprehensive survey

  Caires Moreira, L., Li, W., Fitzpatrick, M., Lu, X. & Li, X., 2018, In: International Journal of Nanomanufacturing. 14, 2, p. 140-164 25 p.

  Research output: Contribution to journal › Article › peer-review

  • Machine tools
  • Energy efficiency
  • Energy utilization
  • Sustainable development
  • Climate change
  2 Citations (Scopus)

• Recovery of fatigue life using laser peening on 2024‐T351 aluminium sheet containing scratch damage: The role of residual stress

  Smyth, N., Toparli, M. B., Fitzpatrick, M. & Irving, P. E., 1 May 2019, In: Fatigue and Fracture of Engineering Materials and Structures. 42, 5, p. 1161-1174 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum sheet
  • Shot peening
  • Residual stresses
  • Lasers
  • Fatigue of materials
  8 Citations (Scopus)

  13 Downloads (Pure)

• Reactor pressure vessel embrittlement: Insights from neural network modelling

  Mathew, J., Parfitt, D., Wilford, K., Riddle, N., Alamaniotis, M., Chroneos, A. & Fitzpatrick, M. E., 15 Apr 2018, In: Journal of Nuclear Materials. 502, p. 311-322 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • pressure vessels
  • Embrittlement
  • embrittlement
  • Pressure vessels
  • reactors
  9 Citations (Scopus)

  32 Downloads (Pure)

• Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction

  Ganguly, S., Edwards, L. & Fitzpatrick, M. E., 25 Jan 2011, In: Materials Science and Engineering A. 528, 3, p. 1226-1232 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Diffraction
  • welding
  • residual stress
  • Residual stresses
  • Welding
  20 Citations (Scopus)

• Probabilistic kernel machines for predictive monitoring of weld residual stress in energy systems

  Alamaniotis, M., Mathew, J., Chroneos, A., Fitzpatrick, M. & Tsoukolas, L., May 2018, In: Engineering Applications of Artificial Intelligence. 71, p. 138-154 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Residual stresses
  • Welds
  • Linear regression
  • Steel pipe
  • Monitoring
  6 Citations (Scopus)

  26 Downloads (Pure)

• Prediction of welding residual stresses using machine learning: Comparison between neural networks and neuro-fuzzy systems

  Mathew, J., Griffin, J., Alamaniotis, M., Kanarachos, S. & Fitzpatrick, M., Sep 2018, In: Applied Soft Computing. 70, p. 131-146 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fuzzy systems
  • Residual stresses
  • Welding
  • Machine learning
  • Neural networks
  18 Citations (Scopus)

  125 Downloads (Pure)

• Physical properties and defect processes of M3SnC2 (M = Ti, Zr, Hf) MAX phases: Effect of M-elements

  Hadi, M. A., Christopoulos, S., Naqib, S. H., Chroneos, A., Fitzpatrick, M. & Islam, A. K. M. A., 5 Jun 2018, In: Journal of Alloys and Compounds. 748, p. 804-813 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fermi surface
  • Debye temperature
  • Lattice constants
  • Electronic density of states
  • Physical properties
  21 Citations (Scopus)

  30 Downloads (Pure)

• Optimal design of a quadratic parameter varying vehicle suspension system using contrast-based Fruit Fly Optimisation

  Kanarachos, S., Dizqah, A. M., Chrysakis, G. & Fitzpatrick, M. E., 1 Jan 2018, In: Applied Soft Computing. 62, p. 463-477 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Vehicle suspensions
  • Fruits
  • Global optimization
  • Brain
  • Damping
  23 Citations (Scopus)

  154 Downloads (Pure)

• On full MAGV lateral dynamics exploitation: Autonomous Drift Control

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., 1 Mar 2018, 15th International Workshop on Advanced Motion Control (IEEE AMC2018), Tokyo . IEEE

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Ground vehicles
  • Electric motors
  • Wheels
  • Torque
  • Control systems
  1 Citation (Scopus)

• Neutron Transmission Strain Measurements on IMAT: Residual Strain Mapping in an AlSiCp Metal Matrix Composite

  Ramadhan, R., Kockelmann, W., Tremsin, A. S. & Fitzpatrick, M., 20 Apr 2018, International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation: MECA SENS 2017. Materials Research Forum LLC, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  Open Access

  File

  • metal matrix composites
  • strain measurement
  • neutrons
  • cross correlation
  • neutron diffraction
  22 Downloads (Pure)

• Neutron diffraction study of elastoplastic behaviour of Al/SiCp metal matrix composite during tensile loading and unloading

  Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Neutron diffraction
  • metal matrix composites
  • unloading
  • Unloading
  • neutron diffraction
  1 Citation (Scopus)

• Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness

  Haigh, R. D., Hutchings, M. T., Games, J. A., Ganguly, S., Mizuno, R., Ogawa, K., Okido, S., Paradowska, A. M. & Fitzpatrick, M. E., Jan 2013, In: International Journal of Pressure Vessels and Piping. 101, January 2013, p. 1-11

  Research output: Contribution to journal › Article

  Open Access

  • Neutron diffraction
  • Stress measurement
  • Steel pipe
  • Austenitic stainless steel
  • Metals
  17 Citations (Scopus)

• Nanostructural Metallic Materials-Nanoengineering and Nanomanufacturing

  Fitzpatrick, M. E., Caballero, F. G. & Van De Voorde, M. H., 30 Jan 2015, The Nano-Micro Interface: Bridging the Micro and Nano Worlds: Second Edition. Wiley, Vol. 1-2. p. 135-158 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  • Rare Earth Metals
  • Fabrication
  • Nanostructured materials
  • Rare earths
  • Alloying

• Modelling oxygen self-diffusion in UO2 under pressure

  Cooper, M. W. D., Grimes, R. W., Fitzpatrick, M. E. & Chroneos, A., 22 Oct 2015, In: Solid State Ionics. 282, p. 26-30

  Research output: Contribution to journal › Article

  Open Access

  File

  • Oxygen
  • oxygen
  • Hydrostatic pressure
  • nuclear fuels
  • Nuclear fuels
  36 Citations (Scopus)

  33 Downloads (Pure)

• Modelling of an imaging beamline at the ISIS pulsed neutron source

  Burca, G., Kockelmann, W., James, J. A. & Fitzpatrick, M. E., 2013, In: Journal of Instrumentation. 8, October 2013

  Research output: Contribution to journal › Article

  Open Access

  • Neutron sources
  • Neutron
  • Imaging
  • Neutrons
  • neutron sources
  12 Citations (Scopus)

• Microstructure, tensile and creep properties of an austenitic ODS 316L steel

  Leo, J. R. O., Pirfo Barroso, S., Fitzpatrick, M. E., Wang, M. & Zhou, Z., 11 Mar 2019, In: Materials Science and Engineering A. 749, p. 158-165 8 p.

  Research output: Contribution to journal › Article › peer-review

  • tensile creep
  • creep properties
  • Oxides
  • Steel
  • tensile properties
  5 Citations (Scopus)

• Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis

  Meixner, M., Fitzpatrick, M. E. & Reimers, W., 17 Jan 2011, In: Composites Science and Technology. 71, 2, p. 167-176 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • X ray diffraction analysis
  • Magnesium
  • Compaction
  • Composite materials
  12 Citations (Scopus)

• Measurement and Modelling of Residual Stress in Wire-Feed Additively Manufactured Titanium

  Ahmed, B., van der Veen, S., Fitzpatrick, M. & Guo, H., 2018, In: Materials Science and Technology. 34, 18, p. 2250-2259 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Titanium
  • residual stress
  • Residual stresses
  • titanium
  • Wire
  6 Citations (Scopus)

  13 Downloads (Pure)

• Mapping residual strain induced by cold working and by laser shock peening using neutron transmission spectroscopy

  Ramadhan, R. S., Syed, A. K., Tremsin, A. S., Kockelmann, W., Dalgliesh, R., Chen, B., Parfitt, D. & Fitzpatrick, M. E., 5 Apr 2018, In: Materials and Design. 143, p. 56-64 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Cold working
  • Shot peening
  • Spectroscopy
  • Neutrons
  • Lasers
  11 Citations (Scopus)

  24 Downloads (Pure)

• Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

  Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • aircraft structures
  • straps
  • retarders
  • durability
  • cracks
  8 Citations (Scopus)

• Intrinsic defect processes and elastic properties of Ti3AC2 (A = Al, Si, Ga, Ge, In, Sn) MAX phases

  Christopoulos, S., Filippatos, P-P., Hadi, M. A., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 14 Jan 2018, In: Journal of Applied Physics. 123, 2, 025103.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • elastic properties
  • defects
  • nuclear fuels
  • operating temperature
  • transition metals
  15 Citations (Scopus)

  62 Downloads (Pure)

• Instantaneous vehicle fuel consumption estimation using smartphones and Recurrent Neural Networks

  Kanarachos, S., Mathew, J. & Fitzpatrick, M., 15 Apr 2019, In: Expert Systems with Applications. 120, p. 436-447 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Recurrent neural networks
  • Smartphones
  • Fuel consumption
  • Monitoring
  • Air pollution
  10 Citations (Scopus)

  79 Downloads (Pure)

• Insight on the inconsistencies of Barkhausen signal measurements for radiation damage on nuclear reactor steel

  Pirfo Barroso, S., Fizpatrick, M. E., Gillemot, F., Horváth, M. & Szekely, R., 2014, AIP Conference Proceedings. AIP, Vol. 1581. p. 1229

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Radiation damage
  • Magnetic variables measurement
  • Nuclear reactors
  • Irradiation
  • Steel
  1 Citation (Scopus)

• Influence of cooling rate on the precipitation kinetics of nanoscale isothermal ω-phase in metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr

  Sharma, D., Parfitt, D., Chen, B., Roebuck, B., Venero, D. A., Kada, S. R., Fabijanic, D. & Fitzpatrick, M. E., 6 Nov 2020, In: Journal of Alloys and Compounds. (In-Press), p. (In-Press) 157822.

  Research output: Contribution to journal › Article › peer-review

  • Precipitates
  • Cooling
  • Water
  • Neutron scattering
  • Aging of materials

• Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

  Zeybek, A., Barroso, S. P., Chong, K. B., Edwards, L. & Fitzpatrick, M., Jun 2014, In: Journal of Materials Engineering and Performance. In press

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • yttria
  • Yttrium oxide
  • Ferritic stainless steel
  • Powder metallurgy
  • Neutron scattering
  7 Citations (Scopus)

  20 Downloads (Pure)

• Improvement of the Contour Method for Measurement of Near-Surface Residual Stresses from Laser Peening

  Torpali, M. B., Fitzpatrick, M. E. & Gungor, S., May 2013, In: Experimental Mechanics. 53, 9, p. 1705-1718

  Research output: Contribution to journal › Article

  Open Access

  • Shot peening
  • Residual stresses
  • Lasers
  • X ray diffraction
  • Splines
  27 Citations (Scopus)

• High strain-rate material model validation for laser peening simulation

  Langer, K., Olson, S., Brockman, R., Braisted, W., Spradlin, T. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. September 2015

  Research output: Contribution to journal › Article

  Open Access

  File

  • Shot peening
  • Strain rate
  • Lasers
  • Compression testing
  • Residual stresses
  78 Downloads (Pure)