Find Research outputs

Search results

• A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 49, 4, p. 751-760 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Mechanical Properties
  • Mechanical testing
  • nanoindentation
  39 Citations (Scopus)

• Activation volumes of oxygen self-diffusion in fluorite structured oxides

  Christopoulos, S-R. G., Kordatos, A., Cooper, M. W. D., Fitzpatrick, M. E. & Chroneos, A., 27 Oct 2016, In: Materials Research Express. 3, 10, 105504.

  Research output: Contribution to journal › Article › peer-review

  • Fluorspar
  • Oxides
  • Chemical activation
  • Oxygen
  • Molecular dynamics
  2 Citations (Scopus)

• Analysis of Surface Roughness Influence in Non-Destructive Magnetic Measurements Applied to Reactor Pressure Vessel Steels

  Vertesy, G., Gasperics, A., Griffin, J., Mathew, J., Fitzpatrick, M. & Uytdenhouwen, I., 15 Dec 2020, In: Applied Sciences. 10, 24, p. 1-11 11 p., 8938.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Magnetic variables measurement
  • pressure vessels
  • Steel structures
  • magnetic measurement
  • Surface roughness
  1 Downloads (Pure)

• A new bridge technique for neutron tomography and diffraction measurements

  Burca, G., James, J. A., Kockelmann, W., Fitzpatrick, M. E., Zhang, S. Y., Hovind, J. & Van Langh, R., 21 Sep 2011, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 651, 1, p. 229-235 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutrons
  • Diffraction
  • Tomography
  • tomography
  • neutrons
  10 Citations (Scopus)

• An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels

  Zhang, H., Gorley, M. J., Boon Chong, K., Fitzpatrick, M. E., Roberts, S. G. & Grant, P. S., 5 Jan 2014, In: Journal of Alloys and Compounds. 582, 2014, p. 769-773

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Neutron powder diffraction
  • Oxides
  • Ferritic stainless steel
  • Precipitates
  • Annealing
  20 Citations (Scopus)

• Anomaly detection in time series data using a combination of wavelets, neural networks and Hilbert transform

  Kanarachos, S., Mathew, J., Chroneos, A. & Fitzpatrick, M. E., 2015.

  Research output: Contribution to conference › Paper

  Open Access

  File

  • Anomaly detection
  • Time series
  • Neural networks
  • Wavelet analysis
  • Structural health monitoring
  11 Citations (Scopus)

  283 Downloads (Pure)

• Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches

  Khan, K., Fitzpatrick, M., Hainsworth, S., Evans, A. D. & Edwards, L., 2011, In: Acta Materialia. 59, 20, p. 7508-7520 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Nanoindentation
  • X ray diffraction
  • Residual stresses
  • Diffraction
  27 Citations (Scopus)

• Application of the eigenstrain approach to predict the residual stress distribution in laser shock peened AA7050-T7451 samples

  Coratella, S., Sticchi, M., Toparli, M. B., Fitzpatrick, M. E. & Kashaev, K., 15 Jul 2015, In: Surface and Coatings Technology. 273, p. 39-49

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • stress distribution
  • residual stress
  • Residual stresses
  • Stress concentration
  • shock
  11 Citations (Scopus)

  221 Downloads (Pure)

• Atomic force microscopy (AFM) for materials characterization

  Khan, M. K., Wang, Q. Y. & Fitzpatrick, M. E., 2016, Materials Characterization Using Nondestructive Evaluation (NDE) Methods. Huebschen, G., Altpeter, I., Tschuncky, R. & Herrmann, H-G. (eds.). London: Woodhead Publishing, p. 1-16

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • atomic force microscopy
  • characterization
  • liquid air
  • stiffness
  • spatial resolution
  4 Citations (Scopus)

• Computational modelling to enhance safety of operating nuclear power plants

  Mathew, J., Christopoulos, S., Chroneos, A., Parfitt, D. & Fitzpatrick, M., 13 Oct 2016.

  Research output: Contribution to conference › Abstract

• Describing oxygen self-diffusion in PuO2 by connecting point defect parameters with bulk properties

  Chroneos, A., Fitzpatrick, M. E. & Tsoukalas, L. H., 2015, In: Journal of Materials Science: Materials in Electronics. 26, 5, p. 3287-3290

  Research output: Contribution to journal › Article

  Open Access

  File

  • Point defects
  • point defects
  • Oxygen
  • oxygen
  • nuclear fuels
  14 Citations (Scopus)

  24 Downloads (Pure)

• Determination of multiple near-surface residual stress components in laser peened aluminium alloy via the contour method

  Toparli, M. B., Fitzpatrick, M. E. & Gungor, S., 2015, In: Metallurgical and Materials Transactions A. 46, 9, p. 4268-4275

  Research output: Contribution to journal › Article

  Open Access

  File

  • aluminum alloys
  • residual stress
  • Aluminum alloys
  • Residual stresses
  • Lasers
  7 Citations (Scopus)

  31 Downloads (Pure)

• Determination of normal and shear residual stresses from fracture surface mismatch

  Araujo de Oliveira, J., Kowal, J., Gungor, S. & Fitzpatrick, M. E., 15 Oct 2015, In: Materials & Design. 83, p. 176-184

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shear stress
  • Residual stresses
  • Plasticity
  • Stress measurement
  • Forging
  6 Citations (Scopus)

  85 Downloads (Pure)

• Development and application of the contour method to determine the residual stresses in thin laser-peened aluminium alloy plates

  Toparli, M. B. & Fitzpatrick, M. E., 8 Oct 2015, In: Experimental Mechanics. 56, 2, p. 323-330

  Research output: Contribution to journal › Article

  Open Access

  File

  • Aluminum alloys
  • Residual stresses
  • Lasers
  • Splines
  • Glues
  12 Citations (Scopus)

  116 Downloads (Pure)

• Disordered Ionic Conductors

  Kordatos, A., Christopoulos, S., Fitzpatrick, M. & Chroneos, A., 8 Sep 2016.

  Research output: Contribution to conference › Abstract

  • conductors
  • solid oxide fuel cells
  • energy storage
  • electric power
  • electric batteries

• Effect of impact damage on fatigue performance of structures reinforced with GLARE bonded crack retarders

  Syed, A. K., Fitzpatrick, M. E., Moffatt, J. E., Doucet, J. & Durazo-Cardenas, I., Nov 2015, In: International Journal of Fatigue. 80, p. 231-237 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue
  • Damage
  • Crack
  • Fatigue of materials
  • Cracks
  7 Citations (Scopus)

  33 Downloads (Pure)

• Effect of residual stress on the nanoindentation response of aerospace aluminium alloys

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 50, 10, p. 2967-2976 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Residual Stress
  • nanoindentation
  • aluminum alloys
  36 Citations (Scopus)

• Effect of Thermal Residual Stresses on Bonded Structures Containing Cold Expanded and Bolted Holes

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., 2014, In: Advanced Materials Research. 996, Chapter II. Manufacturing and Materials Processing, p. 682-687

  Research output: Contribution to journal › Article

  Open Access

  • Thermal stress
  • Residual stresses
  • Neutron diffraction
  • Stress measurement
  • Compressive stress
  4 Citations (Scopus)

• Effect of ultrasonic peening and accelerated corrosion exposure on the residual stress distribution in welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 3, p. 1214-1226

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • peening
  • Shot peening
  • Steel
  • stress distribution
  • residual stress
  11 Citations (Scopus)

  66 Downloads (Pure)

• Effect of Ultrasonic Peening on Fatigue Strength of Welded Marine Structures - Lloyd’s Register Research Programme

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmad, B. & Fitzpatrick, M. E., 2014, Unknown Host Publication.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

  1 Citation (Scopus)

• Evolution of residual stress during fatigue crack growth in an aluminium specimen with a bonded crack retarder

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., Nov 2014, In: Composite Structures. 117, p. 12-16

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum
  • Fatigue crack propagation
  • Residual stresses
  • Cracks
  • Stress measurement
  5 Citations (Scopus)

  35 Downloads (Pure)

• Experimental study of room-temperature indentation viscoplastic ‘creep’ in zirconium

  Storer, S. C., Fitzpatrick, M. E., Hainsworth, S. V. & Rist, M. A., 2016, In: Philosophical Magazine. 96, 24, p. 2547-2563

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • nanoindentation
  • indentation
  • strain rate
  • room temperature
  • creep tests
  5 Citations (Scopus)

  38 Downloads (Pure)

• Fatigue performance of friction stir welded marine grade steel

  Polezhayeva, H., Toumpis, A. I., Galloway, A. M., Molter, L., Ahmed, B. & Fitzpatrick, M. E., Dec 2015, In: International Journal of Fatigue. 81, p. 162–170

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue
  • Steel
  • Friction Stir Welding
  • Friction
  • S-N Curve
  10 Citations (Scopus)

  89 Downloads (Pure)

• Finite Element Analysis of Laser Peening of Thin Aluminum Structures

  Langer, K., Spradlin, T. & Fitzpatrick, M., 6 Jan 2020, In: Metals. 10, 1, 16 p., 93.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shot peening
  • Aluminum
  • Lasers
  • Finite element method
  • Surface treatment
  2 Citations (Scopus)

  12 Downloads (Pure)

• Germanium diffusion in aluminium: connection between point defect parameters with bulk properties

  Ganniari-Papageorgiou, E., Fitzpatrick, M. E. & Chroneos, A., 28 Jul 2015, In: Journal of Materials Science: Materials in Electronics. 26, 11, p. 8421-8424

  Research output: Contribution to journal › Article

  Open Access

  File

  • Germanium
  • Point defects
  • Aluminum
  • point defects
  • germanium
  6 Citations (Scopus)

  17 Downloads (Pure)

• High strain-rate material model validation for laser peening simulation

  Langer, K., Olson, S., Brockman, R., Braisted, W., Spradlin, T. & Fitzpatrick, M. E., 2015, In: The Journal of Engineering. September 2015

  Research output: Contribution to journal › Article

  Open Access

  File

  • Shot peening
  • Strain rate
  • Lasers
  • Compression testing
  • Residual stresses
  78 Downloads (Pure)

• Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

  Zeybek, A., Barroso, S. P., Chong, K. B., Edwards, L. & Fitzpatrick, M., Jun 2014, In: Journal of Materials Engineering and Performance. In press

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • yttria
  • Yttrium oxide
  • Ferritic stainless steel
  • Powder metallurgy
  • Neutron scattering
  7 Citations (Scopus)

  20 Downloads (Pure)

• Insight on the inconsistencies of Barkhausen signal measurements for radiation damage on nuclear reactor steel

  Pirfo Barroso, S., Fizpatrick, M. E., Gillemot, F., Horváth, M. & Szekely, R., 2014, AIP Conference Proceedings. AIP, Vol. 1581. p. 1229

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Radiation damage
  • Magnetic variables measurement
  • Nuclear reactors
  • Irradiation
  • Steel
  1 Citation (Scopus)

• In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel

  Das, Y. B., Forsey, A. N., Simm, T. H., Perkins, K. M., Fitzpatrick, M. E., Gungor, S. & Moat, R. J., 15 Dec 2016, In: Materials & Design. 112, p. 107-116

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Phase transitions
  • Austenitic stainless steel
  • Transformation Induced Plasticity steel
  • Electron diffraction
  • Martensitic transformations
  35 Citations (Scopus)

  153 Downloads (Pure)

• Investigation of oxygen self-diffusion in PuO2 by combining molecular dynamics with thermodynamic calculations

  Saltas, V., Chroneos, A., Cooper, M. W. D., Fitzpatrick, M. E. & Vallianatos, F., 26 Oct 2016, In: RSC Advances. 6, 105, p. 103641-103649 9 p.

  Research output: Contribution to journal › Article

  Open Access

  File

  • Molecular dynamics
  • Chemical activation
  • Thermodynamics
  • Oxygen
  • Plutonium
  5 Citations (Scopus)

  23 Downloads (Pure)

• Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

  Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • aircraft structures
  • straps
  • retarders
  • durability
  • cracks
  8 Citations (Scopus)

• Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis

  Meixner, M., Fitzpatrick, M. E. & Reimers, W., 17 Jan 2011, In: Composites Science and Technology. 71, 2, p. 167-176 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • X ray diffraction analysis
  • Magnesium
  • Compaction
  • Composite materials
  12 Citations (Scopus)

• Minimization and Mitigation of Wire EDM Cutting Errors in the Application of the Contour Method of Residual Stress Measurement

  Ahmed, B. & Fitzpatrick, M. E., Jan 2016, In: Metallurgical and Materials Transactions A. 47, 1, p. 301-313

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress measurement
  • stress measurement
  • residual stress
  • Residual stresses
  • Wire
  12 Citations (Scopus)

  102 Downloads (Pure)

• Modelling oxygen self-diffusion in UO2 under pressure

  Cooper, M. W. D., Grimes, R. W., Fitzpatrick, M. E. & Chroneos, A., 1 Dec 2015, In: Solid State Ionics. 282, p. 26-30

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Oxygen
  • oxygen
  • Hydrostatic pressure
  • nuclear fuels
  • Nuclear fuels
  37 Citations (Scopus)

  34 Downloads (Pure)

• Nanostructural Metallic Materials-Nanoengineering and Nanomanufacturing

  Fitzpatrick, M. E., Caballero, F. G. & Van De Voorde, M. H., 30 Jan 2015, The Nano-Micro Interface: Bridging the Micro and Nano Worlds: Second Edition. Wiley, Vol. 1-2. p. 135-158 24 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  • Rare Earth Metals
  • Fabrication
  • Nanostructured materials
  • Rare earths
  • Alloying

• Neutron diffraction study of elastoplastic behaviour of Al/SiCp metal matrix composite during tensile loading and unloading

  Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Neutron diffraction
  • metal matrix composites
  • unloading
  • Unloading
  • neutron diffraction
  1 Citation (Scopus)

• Oxygen self-diffusion in ThO2 under pressure: connecting point defect parameters with bulk properties

  Cooper, M. W. D., Fitzpatrick, M. E., Tsoukalas, L. H. & Chroneos, A., 2016, In: Materials Research Express.

  Research output: Contribution to journal › Article

  Open Access

  File

  • Point defects
  • Hydrostatic pressure
  • Oxygen
  • Nuclear fuels
  • Molecular dynamics
  3 Citations (Scopus)

  25 Downloads (Pure)

• Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction

  Ganguly, S., Edwards, L. & Fitzpatrick, M. E., 25 Jan 2011, In: Materials Science and Engineering A. 528, 3, p. 1226-1232 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Diffraction
  • welding
  • residual stress
  • Residual stresses
  • Welding
  20 Citations (Scopus)

• Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes

  Haigh, R. D., Hutchings, M. T., Fitzpatrick, M. E., James, J. A., Okido, S., Mizuno, R., Ogawa, K. & Hughes, D. J., Aug 2016, In: International Journal of Pressure Vessels and Piping. 144, p. 1–10

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stainless Steel
  • Steel pipe
  • Residual stresses
  • Stainless steel
  • Pipe
  21 Downloads (Pure)

• Residual stresses in aerospace structures reinforced with bonded crack retarders

  Syed, A. K., Fitzpatrick, M. E. & Moffatt, J. E., 2016, In: Journal of Strain Analysis for Engineering Design. 51, 2, p. 170-175

  Research output: Contribution to journal › Article

  Open Access

  File

  • Residual Stress
  • Crack
  • Residual stresses
  • Cracks
  • Fatigue
  1 Citation (Scopus)

  56 Downloads (Pure)

• Residual stresses induced by laser shock peening in orthopaedic Ti-6Al-7Nb alloy

  Shen, X., Shukla, P., Subramaniyan, A. K., Zammit, A., Swanson, P., Lawrence, J. & Fitzpatrick, M. E., Nov 2020, In: Optics and Laser Technology. 131, 106446.

  Research output: Contribution to journal › Article › peer-review

  • Ti-6Al-7Nb alloy
  • peening
  • orthopedics
  • Shot peening
  • Orthopedics
  2 Citations (Scopus)

• Residual Stresses in Ultrasonically Peened Fillet Welded Joints

  Ahmed, B. & Fitzpatrick, M. E., Aug 2014, In: Advanced Materials Research. 996, Chapter III. Materials and Structures, p. 755-760

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Residual stresses
  • Welds
  • Neutron diffraction
  • Fatigue of materials
  • Shot peening
  2 Citations (Scopus)

• Residual Stress Measurements on a Metal Matrix Composite Using the Contour Method with Brittle Fracture

  Araujo de Oliveira, J., Fitzpatrick, M. E. & Kowal, J., 2014, In: Advanced Materials Research. 996, Chapter I. Measurement Methods, p. 249-354

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Stress measurement
  • Brittle fracture
  • Residual stresses
  • Metals
  • Composite materials
  3 Citations (Scopus)

• Stabilization of Zrn+1AlCn MAX Phases: Issues and Achievements

  Zapata-Solvas, E., Christopoulos, S., Fitzpatrick, M., Chroneos, A. & Lee, W. E., 23 Oct 2016.

  Research output: Contribution to conference › Abstract › peer-review

  Open Access

  • Nuclear reactors
  • Stabilization
  • Accidents
  • Phase stability
  • Zircaloy

• Studies regarding corrosion mechanisms in zirconium alloys

  Preuss, M., Frankel, P., Lozano-Perez, S., Hudson, D., Polatidis, E., Ni, N., Wei, J., English, C., Storer, S., Chong, K. B., Fitzpatrick, M., Wang, P., Smith, J., Grovenor, C., Smith, G., Sykes, J., Cottis, B., Lyon, S., Hallstadius, L., Comstock, R. J. & 2 others, Ambard, A. & Blat-Yrieix, M., 1 Jan 2011, Zirconium in the Nuclear Industry: 16th International Symposium. Barbéris, P. & Limbäck, M. (eds.). ASTM International, p. 649-681 33 p. (ASTM Special Technical Publication; vol. 1529 STP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Zirconium alloys
  • Oxides
  • Corrosion
  • Metals
  • Trademarks
  30 Citations (Scopus)

• Surface preparation for residual stress measurement of an accelerated corrosion tested welded marine steel

  Ahmed, B. & Fitzpatrick, M. E., 2015, In: Corrosion Science. 91, p. 357–360

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress measurement
  • Steel
  • Residual stresses
  • Corrosion
  • Neutron diffraction
  3 Citations (Scopus)

  117 Downloads (Pure)

• Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles

  Bacon, D. H., Edwards, L., Moffatt, J. E. & Fitzpatrick, M. E., 1 May 2011, In: Acta Materialia. 59, 9, p. 3373-3383 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Steel
  • X ray diffraction
  • Metals
  • Residual stresses
  31 Citations (Scopus)

• The development of stress in inclusions caused by plastic flow in the matrix of a two-phase composite and its effect on the relief of initial residual stress

  Griffiths, J. R., Davidson, C. J., Finlayson, T. R., Oliver, E. C., Wang, Q. & Fitzpatrick, M. E., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014. Engineers Australia, p. 788-795 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Plastic flow
  • Residual stresses
  • Composite materials
  • Thermal expansion
  • Thermal stress

• The effect of compressive fatigue loads on fatigue strength of non-load carrying specimens subjected to ultrasonic impact treatment

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmed, B. & Fitzpatrick, M. E., 2015, In: Welding in the World. 59, 5, p. 713-721

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compressive stress
  • Ultrasonics
  • Fatigue of materials
  • Ocean structures
  • Residual stresses
  9 Citations (Scopus)

• The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V

  Perumal, B., Rist, M. A., Gungor, S., Brooks, J. W. & Fitzpatrick, M. E., Aug 2016, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 8, p. 4128-4136 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • forging
  • Hot working
  • Forging
  • hot working
  • Microstructure
  15 Citations (Scopus)

  24 Downloads (Pure)