Find Research outputs

Search results

• A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 49, 4, p. 751-760 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Mechanical Properties
  • Mechanical testing
  • nanoindentation
  39 Citations (Scopus)

• A comparison of fatigue crack growth performance of two aerospace grade aluminium alloys reinforced with bonded crack retarders

  Syed, A., Zhang, X. & Fitzpatrick, M., May 2018, In: Fatigue and Fracture of Engineering Materials and Structures. 41, 5, p. 1237-1242

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fatigue crack propagation
  • Aluminum alloys
  • Cracks
  • Fatigue of materials
  • Stress intensity factors
  2 Citations (Scopus)

  35 Downloads (Pure)

• A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings

  Ahmed, R., Fitzpatrick, M. E. & Faisal, N. H., 25 May 2012, In: Surface and Coatings Technology. 206, 19-20, p. 4180-4185 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutron diffraction
  • Sprayed coatings
  • sprayed coatings
  • Strain measurement
  • strain measurement
  16 Citations (Scopus)

• Activation volumes of oxygen self-diffusion in fluorite structured oxides

  Christopoulos, S-R. G., Kordatos, A., Cooper, M. W. D., Fitzpatrick, M. E. & Chroneos, A., 27 Oct 2016, In: Materials Research Express. 3, 10, 105504.

  Research output: Contribution to journal › Article › peer-review

  • Fluorspar
  • Oxides
  • Chemical activation
  • Oxygen
  • Molecular dynamics
  2 Citations (Scopus)

• Anelasticity in austenitic stainless steel

  Ashwin Rao, P., Bouchard, J., Northover, S. M. & Fitzpatrick, M. E., Nov 2012, In: Acta Materialia. 60, 19, p. 6851–6861

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Austenitic stainless steel
  • Creep
  • Neutron diffraction
  • Unloading
  • Strain rate
  22 Citations (Scopus)

• A new bridge technique for neutron tomography and diffraction measurements

  Burca, G., James, J. A., Kockelmann, W., Fitzpatrick, M. E., Zhang, S. Y., Hovind, J. & Van Langh, R., 21 Sep 2011, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 651, 1, p. 229-235 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Neutrons
  • Diffraction
  • Tomography
  • tomography
  • neutrons
  10 Citations (Scopus)

• An in situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion-strengthened ferritic steels

  Zhang, H., Gorley, M. J., Boon Chong, K., Fitzpatrick, M. E., Roberts, S. G. & Grant, P. S., 5 Jan 2014, In: Journal of Alloys and Compounds. 582, 2014, p. 769-773

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Neutron powder diffraction
  • Oxides
  • Ferritic stainless steel
  • Precipitates
  • Annealing
  20 Citations (Scopus)

• Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches

  Khan, K., Fitzpatrick, M., Hainsworth, S., Evans, A. D. & Edwards, L., 2011, In: Acta Materialia. 59, 20, p. 7508-7520 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • Nanoindentation
  • X ray diffraction
  • Residual stresses
  • Diffraction
  27 Citations (Scopus)

• Atomic force microscopy (AFM) for materials characterization

  Khan, M. K., Wang, Q. Y. & Fitzpatrick, M. E., 2016, Materials Characterization Using Nondestructive Evaluation (NDE) Methods. Huebschen, G., Altpeter, I., Tschuncky, R. & Herrmann, H-G. (eds.). London: Woodhead Publishing, p. 1-16

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • atomic force microscopy
  • characterization
  • liquid air
  • stiffness
  • spatial resolution
  4 Citations (Scopus)

• Automotive Magneto-Rheological Dampers: Modelling and Parameter Identification using contrast-based Fruit Fly Optimisation

  Kanarachos, S., Savitski, D., Lagaros, N. & Fitzpatrick, M. E., Dec 2018, In: Soft Computing. 22, 24, p. 8131–8149 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Magnetorheological Damper
  • Fruit
  • Parameter Identification
  • Fruits
  • Damper
  4 Citations (Scopus)

  97 Downloads (Pure)

• Boundary Effects in the Eigenstrain Method

  Lee, S-Y., Coratella, S., Brügger, A., Clausen, B., Brown, D., Langer, K., Fitzpatrick, M. & Noyan, I. C., 15 Jun 2018, In: Experimental Mechanics. 58, 5, p. 799-814 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Neutron diffraction
  • Geometry
  • Thermal expansion
  • Residual stresses
  • Stress concentration
  1 Citation (Scopus)

  30 Downloads (Pure)

• Computational modelling to enhance safety of operating nuclear power plants

  Mathew, J., Christopoulos, S., Chroneos, A., Parfitt, D. & Fitzpatrick, M., 13 Oct 2016.

  Research output: Contribution to conference › Abstract

• Defect process and lithium diffusion in Li₂TiO₃

  Kuganathan, N., Kordatos, A., Fitzpatrick, M. E., Vovk, R. V. & Chroneos, A., 1 Dec 2018, In: Solid State Ionics. 327, p. 93-98 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Vacancies
  • Lithium
  • lithium
  • Defects
  • defects
  26 Citations (Scopus)

• Disordered Ionic Conductors

  Kordatos, A., Christopoulos, S., Fitzpatrick, M. & Chroneos, A., 8 Sep 2016.

  Research output: Contribution to conference › Abstract

  • conductors
  • solid oxide fuel cells
  • energy storage
  • electric power
  • electric batteries

• Effect of alloy temper on surface modification of aluminium 2624 by laser shock peening

  Zabeen, S., Langer, K. & Fitzpatrick, M. E., 15 Aug 2018, In: Surface and Coatings Technology. 347, p. 123-135 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • peening
  • Shot peening
  • Aluminum
  • Surface treatment
  • residual stress
  6 Citations (Scopus)

  10 Downloads (Pure)

• Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects

  Dorman, M., Toparli, M. B., Smyth, N., Cini, A., Fitzpatrick, M. E. & Irving, P. E., 30 Jun 2012, In: Materials Science and Engineering: A. 528, p. 142-151 10 p.

  Research output: Contribution to journal › Article

  • peening
  • fatigue life
  • Aluminum sheet
  • Shot peening
  • residual stress
  71 Citations (Scopus)

• Effect of residual stress on the nanoindentation response of aerospace aluminium alloys

  Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 50, 10, p. 2967-2976 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanoindentation
  • Aluminum Alloy
  • Residual Stress
  • nanoindentation
  • aluminum alloys
  36 Citations (Scopus)

• Effect of texture on the residual stress response from laser peening of an aluminium-lithium alloy

  Zabeen, S., Langer, K. & Fitzpatrick, M. E., 1 Jan 2018, In: Journal of Materials Processing Technology. 251, p. 317-329 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Lithium alloys
  • Shot peening
  • Aluminum alloys
  • Residual stresses
  • Textures
  7 Citations (Scopus)

  80 Downloads (Pure)

• Effect of Thermal Residual Stresses on Bonded Structures Containing Cold Expanded and Bolted Holes

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., 2014, In: Advanced Materials Research. 996, Chapter II. Manufacturing and Materials Processing, p. 682-687

  Research output: Contribution to journal › Article

  Open Access

  • Thermal stress
  • Residual stresses
  • Neutron diffraction
  • Stress measurement
  • Compressive stress
  4 Citations (Scopus)

• Effect of ultrasonic nanocrystal surface modification on residual stress and fatigue cracking in engineering alloys

  Khan, K., Fitzpatrick, M., Wang, Q. Y., Pyoun, Y. S. & Amanov, A., Apr 2018, In: Fatigue and Fracture of Engineering Materials and Structures. 41, 4, p. 844-855 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Nanocrystals
  • Surface treatment
  • Residual stresses
  • Ultrasonics
  • Compressive stress
  17 Citations (Scopus)

  50 Downloads (Pure)

• Effect of Ultrasonic Peening on Fatigue Strength of Welded Marine Structures - Lloyd’s Register Research Programme

  Polezhayeva, H., Howarth, D., Kumar, M., Ahmad, B. & Fitzpatrick, M. E., 2014, Unknown Host Publication.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

  1 Citation (Scopus)

• Energy-resolved neutron imaging for reconstruction of strain introduced by cold working

  Tremsin, A. S., Kockelmann, W., Kelleher, J. F., Paradowska, A. M., Ramadhan, R. S. & Fitzpatrick, M. E., 28 Feb 2018, In: Journal of Imaging. 4, 3, 12 p., 48.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Cold working
  • Neutrons
  • Aluminum
  • Cold Temperature
  • Imaging techniques
  5 Citations (Scopus)

  7 Downloads (Pure)

• Evolution of residual stress during fatigue crack growth in an aluminium specimen with a bonded crack retarder

  Syed, A., Fitzpatrick, M. E. & Moffatt, J. E., Nov 2014, In: Composite Structures. 117, p. 12-16

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Aluminum
  • Fatigue crack propagation
  • Residual stresses
  • Cracks
  • Stress measurement
  5 Citations (Scopus)

  35 Downloads (Pure)

• Experimental study of room-temperature indentation viscoplastic ‘creep’ in zirconium

  Storer, S. C., Fitzpatrick, M. E., Hainsworth, S. V. & Rist, M. A., 2016, In: Philosophical Magazine. 96, 24, p. 2547-2563

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • nanoindentation
  • indentation
  • strain rate
  • room temperature
  • creep tests
  5 Citations (Scopus)

  38 Downloads (Pure)

• Finite Element Analysis of Laser Peening of Thin Aluminum Structures

  Langer, K., Spradlin, T. & Fitzpatrick, M., 6 Jan 2020, In: Metals. 10, 1, 16 p., 93.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Shot peening
  • Aluminum
  • Lasers
  • Finite element method
  • Surface treatment
  2 Citations (Scopus)

  12 Downloads (Pure)

• Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

  Zeybek, A., Barroso, S. P., Chong, K. B., Edwards, L. & Fitzpatrick, M., Jun 2014, In: Journal of Materials Engineering and Performance. In press

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • yttria
  • Yttrium oxide
  • Ferritic stainless steel
  • Powder metallurgy
  • Neutron scattering
  7 Citations (Scopus)

  20 Downloads (Pure)

• Insight on the inconsistencies of Barkhausen signal measurements for radiation damage on nuclear reactor steel

  Pirfo Barroso, S., Fizpatrick, M. E., Gillemot, F., Horváth, M. & Szekely, R., 2014, AIP Conference Proceedings. AIP, Vol. 1581. p. 1229

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • Radiation damage
  • Magnetic variables measurement
  • Nuclear reactors
  • Irradiation
  • Steel
  1 Citation (Scopus)

• In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel

  Das, Y. B., Forsey, A. N., Simm, T. H., Perkins, K. M., Fitzpatrick, M. E., Gungor, S. & Moat, R. J., 15 Dec 2016, In: Materials & Design. 112, p. 107-116

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Phase transitions
  • Austenitic stainless steel
  • Transformation Induced Plasticity steel
  • Electron diffraction
  • Martensitic transformations
  35 Citations (Scopus)

  152 Downloads (Pure)

• Intrinsic defect processes and elastic properties of Ti3AC2 (A = Al, Si, Ga, Ge, In, Sn) MAX phases

  Christopoulos, S., Filippatos, P-P., Hadi, M. A., Kelaidis, N., Fitzpatrick, M. & Chroneos, A., 14 Jan 2018, In: Journal of Applied Physics. 123, 2, 025103.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • elastic properties
  • defects
  • nuclear fuels
  • operating temperature
  • transition metals
  17 Citations (Scopus)

  89 Downloads (Pure)

• Investigation of oxygen self-diffusion in PuO2 by combining molecular dynamics with thermodynamic calculations

  Saltas, V., Chroneos, A., Cooper, M. W. D., Fitzpatrick, M. E. & Vallianatos, F., 26 Oct 2016, In: RSC Advances. 6, 105, p. 103641-103649 9 p.

  Research output: Contribution to journal › Article

  Open Access

  File

  • Molecular dynamics
  • Chemical activation
  • Thermodynamics
  • Oxygen
  • Plutonium
  5 Citations (Scopus)

  22 Downloads (Pure)

• Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

  Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  Open Access

  • aircraft structures
  • straps
  • retarders
  • durability
  • cracks
  8 Citations (Scopus)

• Mapping residual strain induced by cold working and by laser shock peening using neutron transmission spectroscopy

  Ramadhan, R. S., Syed, A. K., Tremsin, A. S., Kockelmann, W., Dalgliesh, R., Chen, B., Parfitt, D. & Fitzpatrick, M. E., 5 Apr 2018, In: Materials and Design. 143, p. 56-64 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Cold working
  • Shot peening
  • Spectroscopy
  • Neutrons
  • Lasers
  11 Citations (Scopus)

  24 Downloads (Pure)

• Measurement and Modelling of Residual Stress in Wire-Feed Additively Manufactured Titanium

  Ahmed, B., van der Veen, S., Fitzpatrick, M. & Guo, H., 2018, In: Materials Science and Technology. 34, 18, p. 2250-2259 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Titanium
  • residual stress
  • Residual stresses
  • titanium
  • Wire
  6 Citations (Scopus)

  14 Downloads (Pure)

• Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis

  Meixner, M., Fitzpatrick, M. E. & Reimers, W., 17 Jan 2011, In: Composites Science and Technology. 71, 2, p. 167-176 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons
  • X ray diffraction analysis
  • Magnesium
  • Compaction
  • Composite materials
  12 Citations (Scopus)

• Minimization and Mitigation of Wire EDM Cutting Errors in the Application of the Contour Method of Residual Stress Measurement

  Ahmed, B. & Fitzpatrick, M. E., Jan 2016, In: Metallurgical and Materials Transactions A. 47, 1, p. 301-313

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress measurement
  • stress measurement
  • residual stress
  • Residual stresses
  • Wire
  12 Citations (Scopus)

  101 Downloads (Pure)

• Neutron diffraction study of elastoplastic behaviour of Al/SiCp metal matrix composite during tensile loading and unloading

  Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Neutron diffraction
  • metal matrix composites
  • unloading
  • Unloading
  • neutron diffraction
  1 Citation (Scopus)

• Neutron Transmission Strain Measurements on IMAT: Residual Strain Mapping in an AlSiCp Metal Matrix Composite

  Ramadhan, R., Kockelmann, W., Tremsin, A. S. & Fitzpatrick, M., 20 Apr 2018, International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation: MECA SENS 2017. Materials Research Forum LLC, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  Open Access

  File

  • metal matrix composites
  • strain measurement
  • neutrons
  • cross correlation
  • neutron diffraction
  23 Downloads (Pure)

• On full MAGV lateral dynamics exploitation: Autonomous Drift Control

  Acosta, M., Kanarachos, S. & Fitzpatrick, M., 1 Mar 2018, 15th International Workshop on Advanced Motion Control (IEEE AMC2018), Tokyo . IEEE

  Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

  • Ground vehicles
  • Electric motors
  • Wheels
  • Torque
  • Control systems
  1 Citation (Scopus)

• Optimal design of a quadratic parameter varying vehicle suspension system using contrast-based Fruit Fly Optimisation

  Kanarachos, S., Dizqah, A. M., Chrysakis, G. & Fitzpatrick, M. E., 1 Jan 2018, In: Applied Soft Computing. 62, p. 463-477 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Vehicle suspensions
  • Fruits
  • Global optimization
  • Brain
  • Damping
  24 Citations (Scopus)

  159 Downloads (Pure)

• Oxygen self-diffusion in ThO2 under pressure: connecting point defect parameters with bulk properties

  Cooper, M. W. D., Fitzpatrick, M. E., Tsoukalas, L. H. & Chroneos, A., 2016, In: Materials Research Express.

  Research output: Contribution to journal › Article

  Open Access

  File

  • Point defects
  • Hydrostatic pressure
  • Oxygen
  • Nuclear fuels
  • Molecular dynamics
  3 Citations (Scopus)

  25 Downloads (Pure)

• Physical properties and defect processes of M3SnC2 (M = Ti, Zr, Hf) MAX phases: Effect of M-elements

  Hadi, M. A., Christopoulos, S., Naqib, S. H., Chroneos, A., Fitzpatrick, M. & Islam, A. K. M. A., 5 Jun 2018, In: Journal of Alloys and Compounds. 748, p. 804-813 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fermi surface
  • Debye temperature
  • Lattice constants
  • Electronic density of states
  • Physical properties
  21 Citations (Scopus)

  31 Downloads (Pure)

• Prediction of welding residual stresses using machine learning: Comparison between neural networks and neuro-fuzzy systems

  Mathew, J., Griffin, J., Alamaniotis, M., Kanarachos, S. & Fitzpatrick, M., Sep 2018, In: Applied Soft Computing. 70, p. 131-146 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Fuzzy systems
  • Residual stresses
  • Welding
  • Machine learning
  • Neural networks
  23 Citations (Scopus)

  142 Downloads (Pure)

• Probabilistic kernel machines for predictive monitoring of weld residual stress in energy systems

  Alamaniotis, M., Mathew, J., Chroneos, A., Fitzpatrick, M. & Tsoukolas, L., May 2018, In: Engineering Applications of Artificial Intelligence. 71, p. 138-154 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Residual stresses
  • Welds
  • Linear regression
  • Steel pipe
  • Monitoring
  6 Citations (Scopus)

  26 Downloads (Pure)

• Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction

  Ganguly, S., Edwards, L. & Fitzpatrick, M. E., 25 Jan 2011, In: Materials Science and Engineering A. 528, 3, p. 1226-1232 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Diffraction
  • welding
  • residual stress
  • Residual stresses
  • Welding
  20 Citations (Scopus)

• Reactor pressure vessel embrittlement: Insights from neural network modelling

  Mathew, J., Parfitt, D., Wilford, K., Riddle, N., Alamaniotis, M., Chroneos, A. & Fitzpatrick, M. E., 15 Apr 2018, In: Journal of Nuclear Materials. 502, p. 311-322 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • pressure vessels
  • Embrittlement
  • embrittlement
  • Pressure vessels
  • reactors
  9 Citations (Scopus)

  32 Downloads (Pure)

• Research on energy consumption and energy efficiency of machine tools: a comprehensive survey

  Caires Moreira, L., Li, W., Fitzpatrick, M., Lu, X. & Li, X., 2018, In: International Journal of Nanomanufacturing. 14, 2, p. 140-164 25 p.

  Research output: Contribution to journal › Article › peer-review

  • Machine tools
  • Energy efficiency
  • Energy utilization
  • Sustainable development
  • Climate change
  2 Citations (Scopus)

• Residual strain and fracture response of Al ₂O ₃ coatings deposited via APS and HVOF techniques

  Ahmed, R., Faisal, N. H., Paradowska, A. M. & Fitzpatrick, M. E., 1 Jan 2012, In: Journal of Thermal Spray Technology. 21, 1, p. 23-40 18 p.

  Research output: Contribution to journal › Review article › peer-review

  • Plasmas
  • Coatings
  • coatings
  • air
  • Air
  15 Citations (Scopus)

• Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling

  Honnige, J. R., Colegrove, P. A., Ahmed, B., Fitzpatrick, M., Ganguly, S., Lee, T. L. & Williams, S. W., 15 Jul 2018, In: Materials & Design. 150, p. 193-205 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stress relief
  • Residual stresses
  • Textures
  • Wire
  • Neutron diffraction
  55 Citations (Scopus)

  39 Downloads (Pure)

• Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes

  Haigh, R. D., Hutchings, M. T., Fitzpatrick, M. E., James, J. A., Okido, S., Mizuno, R., Ogawa, K. & Hughes, D. J., Aug 2016, In: International Journal of Pressure Vessels and Piping. 144, p. 1–10

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Stainless Steel
  • Steel pipe
  • Residual stresses
  • Stainless steel
  • Pipe
  21 Downloads (Pure)

• Residual stresses in aerospace structures reinforced with bonded crack retarders

  Syed, A. K., Fitzpatrick, M. E. & Moffatt, J. E., 2016, In: Journal of Strain Analysis for Engineering Design. 51, 2, p. 170-175

  Research output: Contribution to journal › Article

  Open Access

  File

  • Residual Stress
  • Crack
  • Residual stresses
  • Cracks
  • Fatigue
  1 Citation (Scopus)

  56 Downloads (Pure)