Find Research outputs — Coventry University

Wroński, S., Baczmański, A., Gaj, A., Wierzbanowski, K., Fitzpatrick, M. E., Klosek, V., Lodini, A. & Marciszko, M., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 117-121 5 p. (Materials Science Forum; vol. 772).

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

1 Citation (Scopus)

Residual Stresses in Ultrasonically Peened Fillet Welded Joints

Ahmed, B. & Fitzpatrick, M. E., Aug 2014, In: Advanced Materials Research. 996, Chapter III. Materials and Structures, p. 755-760

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Residual Stress Measurements on a Metal Matrix Composite Using the Contour Method with Brittle Fracture

Araujo de Oliveira, J., Fitzpatrick, M. E. & Kowal, J., 2014, In: Advanced Materials Research. 996, Chapter I. Measurement Methods, p. 249-354

Research output: Contribution to journal › Article › peer-review

Open Access

3 Citations (Scopus)

The development of stress in inclusions caused by plastic flow in the matrix of a two-phase composite and its effect on the relief of initial residual stress

Griffiths, J. R., Davidson, C. J., Finlayson, T. R., Oliver, E. C., Wang, Q. & Fitzpatrick, M. E., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014. Engineers Australia, p. 788-795 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

Through Thickness Residual Stress Measurements by Neutron Diffraction and Hole Drilling in a Single Laser-Peened Spot on a Thin Aluminium Plate

Burak Toparli, M. & Fitzpatrick, M. E., 2014, In: Materials Science Forum. 772, p. 167-172 6 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

2013

Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening

Coratella, S., Toparli, M. B. & Fitzpatrick, M. E., Sep 2013, Materials Science Forum. Trans Tech Publications, Vol. 768-769. p. 185-192

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Open Access

2 Citations (Scopus)

Effect of frequency on high-temperature fatigue crack growth in a silicon carbide reinforced silicon nitride composite

Moffatt, J. E., Fitzpatrick, M. E. & Edwards, L., Feb 2013, In: International Journal of Fatigue. 47, February 2013, p. 319-329

Research output: Contribution to journal › Article

Open Access

7 Citations (Scopus)

Effect of grain size on domain structures, dielectric and thermal depoling of Nd-substituted bismuth titanate ceramics

Viola, G., Boon Chong, K., Eriksson, M., Shen, Z., Zeng, J., Yin, Q., Kan, Y., Wang, P., Ning, H., Zhang, H., Fitzpatrick, M. E., Reece, M. J. & Yan, H., 2013, In: Applied Physics Letters. 103, 182903 (

Research output: Contribution to journal › Article

Open Access

24 Citations (Scopus)

Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride

Bacon, D. H., Edwards, L., Mofffatt, J. E. & Fitzpatrick, M. E., Mar 2013, In: International Journal of Fatigue. 48, 2013, p. 39-47

Research output: Contribution to journal › Article › peer-review

Open Access

31 Citations (Scopus)

Improvement of the Contour Method for Measurement of Near-Surface Residual Stresses from Laser Peening

Torpali, M. B., Fitzpatrick, M. E. & Gungor, S., May 2013, In: Experimental Mechanics. 53, 9, p. 1705-1718

Research output: Contribution to journal › Article

Open Access

27 Citations (Scopus)

Modelling of an imaging beamline at the ISIS pulsed neutron source

Burca, G., Kockelmann, W., James, J. A. & Fitzpatrick, M. E., 2013, In: Journal of Instrumentation. 8, October 2013

Research output: Contribution to journal › Article

Open Access

13 Citations (Scopus)

Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness

Haigh, R. D., Hutchings, M. T., Games, J. A., Ganguly, S., Mizuno, R., Ogawa, K., Okido, S., Paradowska, A. M. & Fitzpatrick, M. E., Jan 2013, In: International Journal of Pressure Vessels and Piping. 101, January 2013, p. 1-11

Research output: Contribution to journal › Article

Open Access

17 Citations (Scopus)

Residual Stress Measurements and Fatigue Testing of Butt Welds Subjected to Peening Treatments

Ahmad, B., Fitzpatrick, M. E., Howarth, D., Polezhayeva, H., Przydatek, J. & Robinson, A., 2013, Unknown Host Publication. International Institute of Welding

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding

2012

A comparison of neutron diffraction and hole-drilling residual strain measurements in thermally sprayed coatings

Ahmed, R., Fitzpatrick, M. E. & Faisal, N. H., 25 May 2012, In: Surface and Coatings Technology. 206, 19-20, p. 4180-4185 6 p.

Research output: Contribution to journal › Article › peer-review

16 Citations (Scopus)

Anelasticity in austenitic stainless steel

Ashwin Rao, P., Bouchard, J., Northover, S. M. & Fitzpatrick, M. E., Nov 2012, In: Acta Materialia. 60, 19, p. 6851–6861

Research output: Contribution to journal › Article › peer-review

Open Access

22 Citations (Scopus)

Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects

Dorman, M., Toparli, M. B., Smyth, N., Cini, A., Fitzpatrick, M. E. & Irving, P. E., 30 Jun 2012, In: Materials Science and Engineering: A. 528, p. 142-151 10 p.

Research output: Contribution to journal › Article

71 Citations (Scopus)

Residual strain and fracture response of Al ₂O ₃ coatings deposited via APS and HVOF techniques

Ahmed, R., Faisal, N. H., Paradowska, A. M. & Fitzpatrick, M. E., 1 Jan 2012, In: Journal of Thermal Spray Technology. 21, 1, p. 23-40 18 p.

Research output: Contribution to journal › Review article › peer-review

15 Citations (Scopus)

2011

A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation

Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 49, 4, p. 751-760 10 p.

Research output: Contribution to journal › Article › peer-review

39 Citations (Scopus)

A new bridge technique for neutron tomography and diffraction measurements

Burca, G., James, J. A., Kockelmann, W., Fitzpatrick, M. E., Zhang, S. Y., Hovind, J. & Van Langh, R., 21 Sep 2011, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 651, 1, p. 229-235 7 p.

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches

Khan, K., Fitzpatrick, M., Hainsworth, S., Evans, A. D. & Edwards, L., 2011, In: Acta Materialia. 59, 20, p. 7508-7520 13 p.

Research output: Contribution to journal › Article › peer-review

27 Citations (Scopus)

Effect of residual stress on the nanoindentation response of aerospace aluminium alloys

Khan, K., Fitzpatrick, M., Hainsworth, S. & Edwards, L., 2011, In: Computational Materials Science. 50, 10, p. 2967-2976 10 p.

Research output: Contribution to journal › Article › peer-review

36 Citations (Scopus)

Life Extension Techniques for Aircraft Structures – Extending Durability and Promoting Damage Tolerance through Bonded Crack Retarders

Irving, P. E., Zhang, X., Doucet, J., Figueroa-Gordon, D., Boscolo, M., Heinimann, M., Shepherd, G., Fitzpatrick, M. E. & Liljedahl, D., 2011, ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives. Springer Verlag, p. 753-770

Research output: Chapter in Book/Report/Conference proceeding › Chapter

Open Access

8 Citations (Scopus)

Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis

Meixner, M., Fitzpatrick, M. E. & Reimers, W., 17 Jan 2011, In: Composites Science and Technology. 71, 2, p. 167-176 10 p.

Research output: Contribution to journal › Article › peer-review

12 Citations (Scopus)

Problems in using a comb sample as a stress-free reference for the determination of welding residual stress by diffraction

Ganguly, S., Edwards, L. & Fitzpatrick, M. E., 25 Jan 2011, In: Materials Science and Engineering A. 528, 3, p. 1226-1232 7 p.

Research output: Contribution to journal › Article › peer-review

20 Citations (Scopus)

Studies regarding corrosion mechanisms in zirconium alloys

Preuss, M., Frankel, P., Lozano-Perez, S., Hudson, D., Polatidis, E., Ni, N., Wei, J., English, C., Storer, S., Chong, K. B., Fitzpatrick, M., Wang, P., Smith, J., Grovenor, C., Smith, G., Sykes, J., Cottis, B., Lyon, S., Hallstadius, L., Comstock, R. J. & 2 others, Ambard, A. & Blat-Yrieix, M., 1 Jan 2011, Zirconium in the Nuclear Industry: 16th International Symposium. Barbéris, P. & Limbäck, M. (eds.). ASTM International, p. 649-681 33 p. (ASTM Special Technical Publication; vol. 1529 STP).

Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review

29 Citations (Scopus)

Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles

Bacon, D. H., Edwards, L., Moffatt, J. E. & Fitzpatrick, M. E., 1 May 2011, In: Acta Materialia. 59, 9, p. 3373-3383 11 p.

Research output: Contribution to journal › Article › peer-review

31 Citations (Scopus)

Filters for Research output

Search results