|
Search concepts
|
| Selected filters |
Search results
-
2017
Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping
Chokshi, P., Dashwood, R. & Hughes, D. J., 1 Oct 2017, In: Computers and Structures. 190, p. 162-172 11 p.Research output: Contribution to journal › Article › peer-review
Open Access27 Citations (Scopus) -
Quasi-static and dynamic testing of splitting, expansion and expansion-splitting hybrid tubes under oblique loading
Moreno, C., Beaumont, R., Hughes, D. J., Williams, T. & Dashwood, R., Feb 2017, In: International Journal of Impact Engineering. 100, p. 117-130 14 p.Research output: Contribution to journal › Article › peer-review
12 Citations (Scopus) -
Revealing the mechanical and microstructural performance of multiphase steels during tensile, forming and flanging operations
Efthymiadis, P., Hazra, S., Clough, A., Lakshmi, R., Alamoudi, A., Dashwood, R. & Shollock, B., 31 Jul 2017, In: Materials Science and Engineering A. 701, p. 174-186 13 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile11 Citations (Scopus)16 Downloads (Pure) -
2016
Understanding capacity fade in silicon based electrodes for lithium-ion batteries using three electrode cells and upper cut-off voltage studies
Beattie, S. D., Loveridge, M. J., Lain, M. J., Ferrari, S., Polzin, B. J., Bhagat, R. & Dashwood, R., 20 Jan 2016, In: Journal of Power Sources. 302, p. 426-430 5 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile71 Citations (Scopus)30 Downloads (Pure) -
2018
Comparison of superplastic forming abilities of as‐cast AZ91 magnesium alloy prepared by twin roll casting and WE43 magnesium alloy
Taylor, S., Janik, V., Warwick, WMG. U., Mogire, E. & Dashwood, R., 1 Oct 2018, In: Materials Science and Technology. 49, 10, p. 1206-1212 7 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
2017
Predicting the Warm Forming Behavior of WE43 and AA5086 Alloys
Kapoor, I., Narayanan, R. G., Taylor, S., Janik, V. & Dashwood, R., 1 Mar 2017, In: Procedia Engineering. 173, p. 897-904 8 p.Research output: Contribution to journal › Conference article › peer-review
Open AccessFile3 Citations (Scopus)35 Downloads (Pure) -
2016
Towards High Capacity Li-ion Batteries Based on Silicon-Graphene Composite Anodes and Sub-micron V-doped LiFePO4 Cathodes
Loveridge, M. J., Lain, M. J., Johnson, I. D., Roberts, A., Beattie, S. D., Dashwood, R., Darr, J. A. & Bhagat, R., 29 Nov 2016, In: Scientific Reports. 6, 37787.Research output: Contribution to journal › Article › peer-review
Open AccessFile34 Citations (Scopus)17 Downloads (Pure) -
Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory: Role of amount and direction of uni-axial pre-strain
Dhara, S., Basak, S., Panda, S. K., Hazra, S., Shollock, B. & Dashwood, R., 29 Oct 2016, In: Journal of Manufacturing Processes. 24, 1, p. 270-282Research output: Contribution to journal › Article
Open AccessFile18 Citations (Scopus)7 Downloads (Pure) -
The Bendability of Ultra High strength Steels
Hazra, S. K., Efthymiadis, P., Alamoudi, A., Kumar, R. L. V., Shollock, B. & Dashwood, R., 2016, In: Journal of Physics: Conference Series. 734, 032097.Research output: Contribution to journal › Article › peer-review
Open AccessFile3 Citations (Scopus)21 Downloads (Pure) -
2017
A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordered γ and α phases in low density steel
Rahnama, A., Dashwood, R. & Sridhar, S., Jan 2017, In: Computational Materials Science. 126, p. 152-159 8 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile12 Citations (Scopus)53 Downloads (Pure) -
2016
Improvements in numerical simulation of the SPR process using a thermo-mechanical finite element analysis
Carandente, M., Dashwood, R. J., Masters, I. G. & Han, L., Oct 2016, In: Journal of Materials Processing Technology. 236, p. 148-161 14 p.Research output: Contribution to journal › Article › peer-review
24 Citations (Scopus) -
2017
Investigating the effect of process parameters on residual stress evolution in plasma transferred arc (PTA) cladding for additive manufacturing of Ti-6Al-4V
Moztarzadeh, H., Gibbons, G., Dashwood, R. J., Seth, S., Paddea, S., Amel, H. & Hughes, D. J., 1 Jan 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). International Conference on Fracture, Vol. 1. p. 439-440 2 p.Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
-
2016
Analytical methodology for the determination of the flow curves of aluminum and steel alloys using the hydraulic bulge tests
Alharthi, H., Hazra, S., Banabic, D. & Dashwood, R., 19 Oct 2016, AIP Conference Proceedings. Cueto, E., Chinesta, F. & Abisset-Chavanne, E. (eds.). American Institute of Physics, Vol. 1769. 200004. (AIP Conference Proceedings; vol. 1769, no. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
Open Access -
2018
Experimental and modelling study of fatigue crack initiation in an aluminium beam with a hole under 4-point bending
Ye, W., Efthymiadis, P., Pinna, C., Ma, A., Shollock, B. & Dashwood, R., 1 May 2018, In: International Journal of Solids and Structures. 138, p. 87-96 10 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile6 Citations (Scopus)64 Downloads (Pure) -
2017
The strain fields present during the bending of ultra-high strength steels
Hazra, S., Efthymiadis, P., Proprentner, D., Shollock, B. & Dashwood, R., 2017, In: Procedia Engineering. 207, p. 1314-1319 6 p.Research output: Contribution to journal › Conference article › peer-review
Open AccessFile2 Citations (Scopus)28 Downloads (Pure) -
2016
Testing, simulation and evaluation of a novel hybrid energy absorber
Moreno, C., Williams, T., Beaumont, R., Hughes, D. J. & Dashwood, R., Jul 2016, In: International Journal of Impact Engineering. 93, p. 11-27 17 p.Research output: Contribution to journal › Article › peer-review
14 Citations (Scopus) -
2017
Evolution of residual stresses in linear deposition wire-based cladding of Ti-6Al-4V
Moztarzadeh, H., Hughes, D. J., Seth, S., Keating, E., Kiraci, E., Gibbons, G. J., Pirling, T. & Dashwood, R. J., 2017, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VIII - 8th MECA SENS. Holden, T., Ungar, T., Buslaps, T. & Pirling, T. (eds.). Trans Tech Publications, Vol. 905 MSF. p. 101-106 6 p. (Materials Science Forum; vol. 905 MSF).Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
-
Effect of Weld Schedule on the Residual Stress Distribution of Boron Steel Spot Welds
Raath, N. D., Norman, D., McGregor, I., Dashwood, R. & Hughes, D. J., 27 Mar 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. (in press), p. (in press) 15 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile3 Citations (Scopus)24 Downloads (Pure) -
2018
Characterization of Loading Responses and Failure Loci of a Boron Steel Spot Weld
Raath, N. D., Norman, D., McGregor, I., Hepple, S., Dashwood, R. & Hughes, D. J., May 2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 5, p. 1536–1551 16 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile5 Citations (Scopus)78 Downloads (Pure) -
2016
Multiscale characterisation of the mechanical properties of austenitic stainless steel joints
Efthymiadis, P., Dashwood, R., Shollock, B., Curry, L., Ghadbeigi, H., Barrow, A. & Robertson, D., 27 Aug 2016, In: Materials Science and Engineering: A. 676, p. 324-335Research output: Contribution to journal › Article
Open AccessFile1 Citation (Scopus)11 Downloads (Pure) -
2018
Determination of the yield loci of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests
Alharthi, H., Hazra, S., Alghamdi, A., Banabic, D. & Dashwood, R., Sep 2018, In: International Journal of Advanced Manufacturing Technology. 98, 5-8, p. 1307–1319 13 p.Research output: Contribution to journal › Article › peer-review
Open Access5 Citations (Scopus) -
Experimental study of internal and external short circuits of commercial automotive pouch lithium-ion cells
Abaza, A., Ferrari, S., Wong, H. K., Lyness, C., Moore, A., Weaving, J., Blanco-Martin, M., Dashwood, R. & Bhagat, R., 1 Apr 2018, In: Journal of Energy Storage. 16, p. 211-217 7 p.Research output: Contribution to journal › Article › peer-review
28 Citations (Scopus) -
2016
Numerical modelling of drawbeads for forming of aluminium alloys
Joshi, Y., Christiansen, P., Masters, I., Bay, N. & Dashwood, R., 2016, In: Journal of Physics: Conference Series. 734, 3, 032082.Research output: Contribution to journal › Article › peer-review
Open AccessFile1 Citation (Scopus)16 Downloads (Pure) -
2017
Characterization of scale and sub-scale development in ultrahigh-strength steels during processing
Zhu, Y., Proprentner, D., Basabe, V., Hanlon, D., Dashwood, R., Melfo, W. M. & Shollock, B. A., 1 Jan 2017, International Symposium on New Developments in Advanced High-Strength Sheet Steels. Association for Iron and Steel Technology, AISTECH, p. 379-393 15 p.Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
-
In-situ heated stage scanning electron microscope analysis and characterisation of recrystallization behaviour of a 7000 series alloy with nickel additions
Taylor, S., Janik, V., Grimes, R. & Dashwood, R., Sep 2017, In: Materialwissenschaft und Werkstofftechnik. 48, 9, p. 876-881 6 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus)