Accepting PhD Students

Willing to speak to media

  • 203 Citations
  • 8 h-Index
20072019
If you made any changes in Pure these will be visible here soon.

Research Output 2007 2019

2019
1 Citation (Scopus)
18 Downloads (Pure)

A Gibbs Energy Balance Model for Growth Via Diffusional Growth-Ledges

Clark, S., Lan, Y., Rahnama, A., Janik, V. & Sridhar, S., 1 Mar 2019, In : ISIJ International. 59, 3, p. 573-582 10 p., ISIJINT-2018-621.

Research output: Contribution to journalArticle

Open Access
File
Gibbs free energy
Energy balance
Ferrite
Growth kinetics
Austenite
2018
5 Citations (Scopus)
12 Downloads (Pure)

A phase-field model investigating the role of elastic strain energy during the growth of closely spaced neighbouring interphase precipitates

Rahnama, A., Clark, S., Janik, V. & Sridhar, S., 1 Feb 2018, In : Computational Materials Science. 142, p. 437-443 7 p.

Research output: Contribution to journalArticle

Open Access
File
Phase Field Model
Strain Energy
Strain energy
Precipitates
precipitates

Comparison of superplastic forming abilities of as‐cast AZ91 magnesium alloy prepared by twin roll casting and WE43 magnesium alloy

Taylor, S., Janik, V., Warwick, WMG. U., Mogire, E. & Dashwood, R., 1 Oct 2018, In : Materials Science and Technology. 49, 10, p. 1206-1212 7 p.

Research output: Contribution to journalArticle

superplastic forming
magnesium alloys
Magnesium alloys
strain rate
Strain rate
12 Citations (Scopus)
44 Downloads (Pure)

Investigating nano-precipitation in a V-containing HSLA steel using small angle neutron scattering

Wang, Y. Q., Clark, S. J., Janik, V., Heenan, R. K., Venero, D. A., Yan, K., McCartney, D. G., Sridhar, S. & Lee, P. D., 15 Feb 2018, In : Acta Materialia. 145, p. 84-96 13 p.

Research output: Contribution to journalArticle

Open Access
File
Steel
Neutron scattering
Precipitates
Vanadium
Transmission electron microscopy
2 Citations (Scopus)
14 Downloads (Pure)

Nano-mechanical properties of Fe-Mn-Al-C lightweight steels

Rahnama, A., Kotadia, H., Clark, S., Janik, V. & Sridhar, S., 30 Jun 2018, In : Scientific Reports. 8, 12 p., 9065.

Research output: Contribution to journalArticle

Open Access
File
hardness
steels
mechanical properties
carbides
stringers
1 Citation (Scopus)
15 Downloads (Pure)
Open Access
File
Bearings (structural)
Steel
Carbon
steels
Annealing
2017
2 Citations (Scopus)

A phase-field model for interphase precipitation in V-micro-alloyed structural steels

Rahnama, A., Clark, S., Janik, V. & Sridhar, S., 1 Sep 2017, In : Computational Materials Science. 137, p. 257-265 9 p.

Research output: Contribution to journalArticle

Open Access
Phase Field Model
Steel
Precipitates
precipitates
steels
1 Citation (Scopus)

In situ characterisation of austenite/ferrite transformation kinetics and modelling of interphase precipitation inter-sheet spacing in V microalloyed HSLA steels

Clark, S., Lan, Y., Janik, V., Rijkenberg, A. & Sridhar, S., 2017, THERMEC 2016. Trans Tech Publications, Vol. 879. p. 356-362 7 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

high strength steels
austenite
High strength steel
Austenite
Ferrite
2 Citations (Scopus)
Nickel
casts
Electron microscopes
electron microscopes
nickel
4 Citations (Scopus)
33 Downloads (Pure)

Interphase precipitation - An interfacial segregation model

Clark, S., Janik, V., Lan, Y. & Sridhar, S., 23 Mar 2017, In : ISIJ International. 57, 3, p. 524-532 9 p.

Research output: Contribution to journalArticle

Open Access
File
Precipitates
Steel
Gibbs free energy
Interfacial energy
Refining
1 Citation (Scopus)
32 Downloads (Pure)

Predicting the Warm Forming Behavior of WE43 and AA5086 Alloys

Kapoor, I., Narayanan, R. G., Taylor, S., Janik, V. & Dashwood, R., 1 Mar 2017, In : Procedia Engineering. 173, p. 897-904 8 p.

Research output: Contribution to journalConference article

Open Access
File
Magnesium alloys
Plastic flow
Temperature
Computer aided engineering
ABAQUS
2016
11 Citations (Scopus)
51 Downloads (Pure)

Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the γ/α transformation

Clark, S., Janik, V., Rijkenberg, A. & Sridhar, S., 1 May 2016, In : Materials Characterization. 115, p. 83-89 7 p.

Research output: Contribution to journalArticle

Open Access
File
Steel
steels
Cooling
cooling
editing
1 Citation (Scopus)

Effect of grain size distribution on recrystallisation kinetics in a Fe-30Ni model alloy

Ji, M., Janik, V., Strangwood, M. & Davis, C., 2016, Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016. Springer Verlag, p. 153-158 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Steel
Kinetics
Grain refinement
Toughness
Nucleation
10 Citations (Scopus)
67 Downloads (Pure)

Zn Diffusion and α-Fe(Zn) Layer Growth During Annealing of Zn-Coated B Steel

Janik, V., Lan, Y., Beentjes, P., Norman, D., Hensen, G. & Sridhar, S., 6 Jan 2016, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 1, p. 400-411 12 p.

Research output: Contribution to journalArticle

Open Access
File
Steel
cracks
steels
Annealing
Cracks
2015
1 Citation (Scopus)

Application of In-Situ Material Characterization Methods to Describe Role of Mo During Processing of Vbearing Micro-Alloyed Steels

Janik, V., Clark, S., Srirangam, P., Rijkenberg, A. & Seetharaman, S., 6 Nov 2015, HSLA Steels 2015, Microalloying 2015 and Offshore Engineering Steels 2015 Conference Proceedings. Wiley, p. 289-295 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Bearings (structural)
Steel
Austenitic steel
Low carbon steel
Processing

Automotive Applications for Magnesium

Grimes, R. & Janik, V., Jan 2015, Encyclopedia of Automotive Engineering. Crolla, D., Foster, D. E., Kobayashi, T. & Vaughan, N. (eds.). Wiley, p. 3101-3123

Research output: Chapter in Book/Report/Conference proceedingChapter

Magnesium
Casting
Structural metals
Die castings
Economics
2014

Elevated Temperature Deformation Behavior of High Strength Al-Cu-Mg-Ag Based Alloy Reinforced by TiB2 Particles

Indriyati, M., Janik, V. & Dashwood, R. J., 10 Mar 2014, Light Metals 2014. Grandfield, J. (ed.). New Jersey: The Minerals, Metals & Materials Society, p. 1353-1358 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Reinforcement
Composite materials
Compression testing
Dynamic recrystallization
Hot working
2 Citations (Scopus)

Role of heating conditions on microcrack formation in zinc coated 22MnB5

Janik, V., Beentjes, P., Norman, D., Hensen, G. & Seetharaman, S., 2014, Materials Science and Technology Conference and Exhibition 2014, MS and T 2014. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 299-306 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Steel
Microcracks
Zinc
Focused ion beams
Heating
3 Citations (Scopus)

Superplastic forming ability of as-cast AZ91 Mg alloy prepared by twin roll casting

Janik, V., Bali, G., Grimes, R. & Dashwood, R., 29 Aug 2014, In : Materialwissenschaft und Werkstofftechnik. 45, 9, p. 815-821 7 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
elongation
Elongation
strip
2013
13 Citations (Scopus)

Elevated-temperature impact toughness of Mg-(Gd, Y)-Zr alloy

Mu, Y. L., Wang, Q. D., Hu, M. L., Janik, V. & Yin, D. D., Jun 2013, In : Scripta Materialia. 68, 11, p. 885-888 4 p.

Research output: Contribution to journalArticle

toughness
Fracture toughness
cleavage
crack tips
Temperature
2012
29 Citations (Scopus)

Creep and fracture behavior of peak-aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct)

Yin, D. D., Wang, Q. D., Boehlert, C. J. & Janik, V., Sep 2012, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, 9, p. 3338-3350 13 p.

Research output: Contribution to journalArticle

Creep
slip
tensile creep
microcracks
magnesium
26 Citations (Scopus)

Creep behavior of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) at 573K

Yin, D. D., Wang, Q. D., Boehlert, C. J., Janik, V., Gao, Y. & Ding, W. J., 1 Jun 2012, In : Materials Science and Engineering A. 546, p. 239-247 9 p.

Research output: Contribution to journalArticle

creep strength
Creep
tensile creep
crack propagation
casts
2011
8 Citations (Scopus)

Influence of thermal and thermo-mechanical processing on the creep resistance of Mg-10Gd-3Y-0,4Zr alloy

Janik, V., Wang, Q. D., Yin, D. D. & Ding, W. J., 2011, Advanced Material Science and Technology. Vol. 675 677. p. 487-490 4 p. (Materials Science Forum; vol. 675 677).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

creep strength
Creep resistance
casts
Creep
Processing
37 Citations (Scopus)

The elevated-temperature mechanical behavior of peak-aged Mg-10Gd-3Y-0.4Zr Alloy

Janik, V., Yin, D. D., Wang, Q. D., He, S. M., Chen, C. J., Chen, Z. & Boehlert, C. J., 25 Mar 2011, In : Materials Science and Engineering A. 528, 7-8, p. 3105-3112 8 p.

Research output: Contribution to journalArticle

Creep
grain boundaries
Fatigue of materials
cavitation flow
Grain boundaries
2009
2 Citations (Scopus)

Microstructural investigation of the failure mechanisms after creep exposure of Mg-Y-Nd-Zn-Mn alloy

Janik, V., Hnilica, F., Smola, B., Stuliková, I. & Očenášek, V., 2009, In : International Journal of Materials Research. 100, 3, p. 296-300 5 p.

Research output: Contribution to journalArticle

Creep
Nucleation
nucleation
sliding
Grain boundary sliding
4 Citations (Scopus)

Phase composition and morphology development in WE-type alloys modified by high Zn content

Smola, B., Stuliková, I., Žaludová, N., Hnilica, F., Janik, V. & Očenášek, V., 2009, In : International Journal of Materials Research. 100, 3, p. 292-295 4 p.

Research output: Contribution to journalArticle

Phase composition
Annealing
Burgers vector
annealing
Formability
2008
3 Citations (Scopus)

Cavitation and grain boundary sliding during creep of Mg-Y-Nd-Zn-Mn alloy

Janík, V., Hnilica, F., Zuna, P., Očenášek, V. & Stulíková, I., 2008, In : Transactions of Nonferrous Metals Society of China (English Edition). 18, SPEC. ISSUE 1, p. s64-s68 5 p.

Research output: Contribution to journalArticle

Grain boundary sliding
cavitation
grain boundary
cavitation flow
Cavitation
22 Citations (Scopus)

Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1 alloy

Hnilica, F., Janík, V., Smola, B., Stulíková, I. & Očenášek, V., 20 Aug 2008, In : Materials Science and Engineering A. 489, 1-2, p. 93-98 6 p.

Research output: Contribution to journalArticle

Creep
tensile creep
exponents
creep tests
stacking fault energy
stress corrosion
stress corrosion cracking
Hydrogen Sulfide
hydrogen sulfide
Stainless Steel
2007

Chemical composition of new copper alloys for machining and its effect on their susceptibility to corrosion cracking

Eremiáš, B., Převorovský, D., Janík, V. & Faltus, J., Sep 2007, In : Materials and Corrosion. 58, 9, p. 681-686 6 p.

Research output: Contribution to journalArticle

Copper alloys
Stress corrosion cracking
corrosion
Machining
Brass