• 2594 Citations
  • 27 h-Index
1992 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

2018
3 Citations (Scopus)
60 Downloads (Pure)

Characterization of Loading Responses and Failure Loci of a Boron Steel Spot Weld

Raath, N. D., Norman, D., McGregor, I., Hepple, S., Dashwood, R. & Hughes, D. J., May 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 5, p. 1536–1551 16 p.

Research output: Contribution to journalArticle

Open Access
File
spot welds
Boron
Steel
loci
Welds

Comparison of superplastic forming abilities of as‐cast AZ91 magnesium alloy prepared by twin roll casting and WE43 magnesium alloy

Taylor, S., Janik, V., Warwick, WMG. U., Mogire, E. & Dashwood, R., 1 Oct 2018, In : Materials Science and Technology. 49, 10, p. 1206-1212 7 p.

Research output: Contribution to journalArticle

superplastic forming
magnesium alloys
Magnesium alloys
strain rate
Strain rate
2 Citations (Scopus)

Determination of the yield loci of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests

Alharthi, H., Hazra, S., Alghamdi, A., Banabic, D. & Dashwood, R., Sep 2018, In : International Journal of Advanced Manufacturing Technology. 98, 5-8, p. 1307–1319 13 p.

Research output: Contribution to journalArticle

Open Access
Hardening
Hydraulics
Yield stress
Metal forming
Sheet metal
5 Citations (Scopus)
43 Downloads (Pure)

Experimental and modelling study of fatigue crack initiation in an aluminium beam with a hole under 4-point bending

Ye, W., Efthymiadis, P., Pinna, C., Ma, A., Shollock, B. & Dashwood, R., 1 May 2018, In : International Journal of Solids and Structures. 138, p. 87-96 10 p.

Research output: Contribution to journalArticle

Open Access
File
Fatigue Crack
Crack Initiation
crack initiation
Aluminum
Crack initiation
9 Citations (Scopus)

Experimental study of internal and external short circuits of commercial automotive pouch lithium-ion cells

Abaza, A., Ferrari, S., Wong, H. K., Lyness, C., Moore, A., Weaving, J., Blanco-Martin, M., Dashwood, R. & Bhagat, R., 1 Apr 2018, In : Journal of Energy Storage. 16, p. 211-217 7 p.

Research output: Contribution to journalArticle

Nails
Short circuit currents
Lithium
Ions
Contact resistance
2017
9 Citations (Scopus)
39 Downloads (Pure)
Open Access
File
Phase Field
Steel
carbides
Carbides
Precipitates
17 Citations (Scopus)

Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping

Chokshi, P., Dashwood, R. & Hughes, D. J., 1 Oct 2017, In : Computers and Structures. 190, p. 162-172 11 p.

Research output: Contribution to journalArticle

Open Access
Boron
Stamping
Steel
Prediction Model
Artificial Neural Network

Characterization of scale and sub-scale development in ultrahigh-strength steels during processing

Zhu, Y., Proprentner, D., Basabe, V., Hanlon, D., Dashwood, R., Melfo, W. M. & Shollock, B. A., 1 Jan 2017, International Symposium on New Developments in Advanced High-Strength Sheet Steels. Association for Iron and Steel Technology, AISTECH, p. 379-393 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Steel
Oxides
Formability
Processing
High strength steel
1 Citation (Scopus)
21 Downloads (Pure)

Effect of Weld Schedule on the Residual Stress Distribution of Boron Steel Spot Welds

Raath, N. D., Norman, D., McGregor, I., Dashwood, R. & Hughes, D. J., 27 Mar 2017, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. (in press), p. (in press) 15 p.

Research output: Contribution to journalArticle

Open Access
File
spot welds
Boron
Steel
schedules
stress distribution

Evolution of residual stresses in linear deposition wire-based cladding of Ti-6Al-4V

Moztarzadeh, H., Hughes, D. J., Seth, S., Keating, E., Kiraci, E., Gibbons, G. J., Pirling, T. & Dashwood, R. J., 2017, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VIII - 8th MECA SENS. Holden, T., Ungar, T., Buslaps, T. & Pirling, T. (eds.). Trans Tech Publications, Vol. 905 MSF. p. 101-106 6 p. (Materials Science Forum; vol. 905 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

3D printers
residual stress
Residual stresses
wire
Wire
2 Citations (Scopus)
Nickel
casts
Electron microscopes
electron microscopes
nickel

Investigating the effect of process parameters on residual stress evolution in plasma transferred arc (PTA) cladding for additive manufacturing of Ti-6Al-4V

Moztarzadeh, H., Gibbons, G., Dashwood, R. J., Seth, S., Paddea, S., Amel, H. & Hughes, D. J., 1 Jan 2017, ICF 2017 - 14th International Conference on Fracture. Gdoutos, E. E. (ed.). International Conference on Fracture, Vol. 1. p. 439-440 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

3D printers
Residual stresses
Plasmas
Phase transitions
Stress measurement
1 Citation (Scopus)
32 Downloads (Pure)

Predicting the Warm Forming Behavior of WE43 and AA5086 Alloys

Kapoor, I., Narayanan, R. G., Taylor, S., Janik, V. & Dashwood, R., 1 Mar 2017, In : Procedia Engineering. 173, p. 897-904 8 p.

Research output: Contribution to journalConference article

Open Access
File
Magnesium alloys
Plastic flow
Temperature
Computer aided engineering
ABAQUS
6 Citations (Scopus)

Quasi-static and dynamic testing of splitting, expansion and expansion-splitting hybrid tubes under oblique loading

Moreno, C., Beaumont, R., Hughes, D. J., Williams, T. & Dashwood, R., Feb 2017, In : International Journal of Impact Engineering. 100, p. 117-130 14 p.

Research output: Contribution to journalArticle

Testing
Energy absorption
9 Citations (Scopus)
15 Downloads (Pure)

Revealing the mechanical and microstructural performance of multiphase steels during tensile, forming and flanging operations

Efthymiadis, P., Hazra, S., Clough, A., Lakshmi, R., Alamoudi, A., Dashwood, R. & Shollock, B., 31 Jul 2017, In : Materials Science and Engineering A. 701, p. 174-186 13 p.

Research output: Contribution to journalArticle

Open Access
File
Steel
steels
Martensite
martensite
Bainite
1 Citation (Scopus)
21 Downloads (Pure)

The strain fields present during the bending of ultra-high strength steels

Hazra, S., Efthymiadis, P., Proprentner, D., Shollock, B. & Dashwood, R., 15 Nov 2017, In : Procedia Engineering. 207, p. 1314-1319 6 p.

Research output: Contribution to journalConference article

Open Access
File
High strength steel
Ductile fracture
Stamping
Ductility
Elongation
2016

Analytical methodology for the determination of the flow curves of aluminum and steel alloys using the hydraulic bulge tests

Alharthi, H., Hazra, S., Banabic, D. & Dashwood, R., 19 Oct 2016, AIP Conference Proceedings. Cueto, E., Chinesta, F. & Abisset-Chavanne, E. (eds.). American Institute of Physics, Vol. 1769. 200004. (AIP Conference Proceedings; vol. 1769, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Open Access
Alloy steel
Hardening
Aluminum alloys
Hydraulics
Metal forming
15 Citations (Scopus)
5 Downloads (Pure)

Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory: Role of amount and direction of uni-axial pre-strain

Dhara, S., Basak, S., Panda, S. K., Hazra, S., Shollock, B. & Dashwood, R., 29 Oct 2016, In : Journal of Manufacturing Processes. 24, 1, p. 270-282

Research output: Contribution to journalArticle

Open Access
File
Formability
Sheet metal
Plasticity
Domes
Aluminum alloys
11 Citations (Scopus)

Improvements in numerical simulation of the SPR process using a thermo-mechanical finite element analysis

Carandente, M., Dashwood, R. J., Masters, I. G. & Han, L., Oct 2016, In : Journal of Materials Processing Technology. 236, p. 148-161 14 p.

Research output: Contribution to journalArticle

Riveting
Piercing
Rivets
Automotive industry
Finite element method
8 Downloads (Pure)

Multiscale characterisation of the mechanical properties of austenitic stainless steel joints

Efthymiadis, P., Dashwood, R., Shollock, B., Curry, L., Ghadbeigi, H., Barrow, A. & Robertson, D., 27 Aug 2016, In : Materials Science and Engineering: A. 676, p. 324-335

Research output: Contribution to journalArticle

Open Access
File
austenitic stainless steels
Austenitic stainless steel
plastic deformation
Plastic deformation
mechanical properties
1 Citation (Scopus)
15 Downloads (Pure)

Numerical modelling of drawbeads for forming of aluminium alloys

Joshi, Y., Christiansen, P., Masters, I., Bay, N. & Dashwood, R., 2016, In : Journal of Physics: Conference Series. 734, 3, 032082.

Research output: Contribution to journalArticle

Open Access
File
aluminum alloys
stamping
strip
steels
plane strain
10 Citations (Scopus)

Testing, simulation and evaluation of a novel hybrid energy absorber

Moreno, C., Williams, T., Beaumont, R., Hughes, D. J. & Dashwood, R., Jul 2016, In : International Journal of Impact Engineering. 93, p. 11-27 17 p.

Research output: Contribution to journalArticle

Testing
Numerical models
Energy absorption
Plant expansion
Friction
1 Citation (Scopus)
20 Downloads (Pure)

The Bendability of Ultra High strength Steels

Hazra, S. K., Efthymiadis, P., Alamoudi, A., Kumar, R. L. V., Shollock, B. & Dashwood, R., 2016, In : Journal of Physics: Conference Series. 734, 032097.

Research output: Contribution to journalArticle

Open Access
File
high strength steels
roll forming
vehicles
stamping
tooling
25 Citations (Scopus)
16 Downloads (Pure)

Towards High Capacity Li-ion Batteries Based on Silicon-Graphene Composite Anodes and Sub-micron V-doped LiFePO4 Cathodes

Loveridge, M. J., Lain, M. J., Johnson, I. D., Roberts, A., Beattie, S. D., Dashwood, R., Darr, J. A. & Bhagat, R., 29 Nov 2016, In : Scientific Reports. 6, 37787.

Research output: Contribution to journalArticle

Open Access
File
Vanadium
Graphite
Silicon
Anodes
Cathodes
54 Citations (Scopus)
21 Downloads (Pure)

Understanding capacity fade in silicon based electrodes for lithium-ion batteries using three electrode cells and upper cut-off voltage studies

Beattie, S. D., Loveridge, M. J., Lain, M. J., Ferrari, S., Polzin, B. J., Bhagat, R. & Dashwood, R., 20 Jan 2016, In : Journal of Power Sources. 302, p. 426-430 5 p.

Research output: Contribution to journalArticle

Open Access
File
Silicon
electric batteries
cut-off
lithium
Anodes
2015
23 Citations (Scopus)

Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature

Panicker, S. S., Singh, H. G., Panda, S. K. & Dashwood, R., Nov 2015, In : Journal of Materials Engineering and Performance. 24, 11, p. 4267-4282 16 p.

Research output: Contribution to journalArticle

Deep drawing
Tensile properties
Domes
Aluminum alloys
Temperature
13 Citations (Scopus)
25 Downloads (Pure)

Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation

Alharbi, K., Ghadbeigi, H., Efthymiadis, P., Zanganeh, M., Celotto, S., Dashwood, R. & Pinna, C., 9 Oct 2015, In : Modelling and Simulation in Materials Science and Engineering. 23, 8, 085005.

Research output: Contribution to journalArticle

Open Access
File
Martensite
Microstructure
Electron microscopes
Steel
Scanning
6 Citations (Scopus)

Determination of the fracture behaviour of axial splitting tubes and the numerical prediction of their energy absorption capabilities

Moreno, C., Beaumont, R., Hughes, D. J., Williams, T. & Dashwood, R., 13 Jan 2015, In : International Journal of Crashworthiness. 20, 2, p. 191-199 9 p.

Research output: Contribution to journalArticle

Energy absorption
energy
Values
simulation
Correlation methods

Exploring the light-weighting potential of steel reinforced with FRP

Keating, E. M., Hughes, D. J., Cafolla, J., McGregor, I. & Dashwood, R., 1 Jan 2015.

Research output: Contribution to conferencePaper

Steel
Fibers
Composite materials
Mechanical testing
Aging of materials
115 Citations (Scopus)

Latest advances in the manufacturing of 3D rechargeable lithium microbatteries

Ferrari, S., Loveridge, M., Beattie, S. D., Jahn, M., Dashwood, R. J. & Bhagat, R., 15 Jul 2015, In : Journal of Power Sources. 286, p. 25-46 22 p.

Research output: Contribution to journalArticle

Lithium
manufacturing
lithium
electric batteries
NEMS
8 Citations (Scopus)

Performance and polarization studies of the magnesium-antimony liquid metal battery with the use of in-situ reference electrode

Leung, P., Heck, S. C., Amietszajew, T., Mohamed, M. R., Conde, M. B., Dashwood, R. J. & Bhagat, R., 14 Sep 2015, In : RSC Advances. 5, 101, p. 83096-83105 10 p.

Research output: Contribution to journalArticle

Antimony
Liquid metals
Magnesium
Polarization
Electrodes

Radial expansion of metal tubes: Static testing and simulation correlation

Moreno, C., Beaumont, R., Hughes, D. J., Dashwood, R. & Williams, T., 1 Jan 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, Vol. 2015-April. p. 805-813 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Energy absorption
Testing
Metals
Numerical models
Friction
2014

Elevated Temperature Deformation Behavior of High Strength Al-Cu-Mg-Ag Based Alloy Reinforced by TiB2 Particles

Indriyati, M., Janik, V. & Dashwood, R. J., 10 Mar 2014, Light Metals 2014. Grandfield, J. (ed.). New Jersey: The Minerals, Metals & Materials Society, p. 1353-1358 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Reinforcement
Composite materials
Compression testing
Dynamic recrystallization
Hot working
23 Citations (Scopus)

Real-time displacement and strain mappings of lithium-ion batteries using three-dimensional digital image correlation

Leung, P. K., Moreno, C., Masters, I., Hazra, S., Conde, B., Mohamed, M. R., Dashwood, R. J. & Bhagat, R., 20 Dec 2014, In : Journal of Power Sources. 271, p. 82-86 5 p.

Research output: Contribution to journalArticle

electric batteries
lithium
ions
progressions
contraction
3 Citations (Scopus)

Superplastic forming ability of as-cast AZ91 Mg alloy prepared by twin roll casting

Janik, V., Bali, G., Grimes, R. & Dashwood, R., 29 Aug 2014, In : Materialwissenschaft und Werkstofftechnik. 45, 9, p. 815-821 7 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
elongation
Elongation
strip
2013

A route to fracture prediction of spot welded boron steel in automotive applications

Raath, N. D., Hughes, D. J., Norman, D., McGregor, I. & Dashwood, R., 2013, TMS Annual Meeting. p. 483-490 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Boron
Welds
Steel
Heat affected zone
Residual stresses

Can shape memory polymer hybrids be used for smart automotive body panels?

Middleton, B. J., Wood, B. M., Goodship, V., Smith, G. F. & Dashwood, R. J., 2013, EUROTECH 2013. Society of Plastics Engineers, p. 295-299 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Shape memory effect
Polymers
Hybrid materials
Sheet metal
Injection molding
2 Citations (Scopus)

Precursor preparation for Ti-Al-V-Y alloy via FFC cambridge process

Hussain, P., Bhagat, R. & Dashwood, R., 2013, In : Applied Mechanics and Materials. 330, p. 62-67 6 p.

Research output: Contribution to journalArticle

Vanadium
Raw materials
Oxides
Yttrium oxide
Titanium oxides
2012
2 Citations (Scopus)

Understanding the behaviour of Ti-5Al-5Mo-5V-3Cr during subtransus isothermal forging

Jones, N. G., Dashwood, R. J., Dye, D. & Jackson, M., 2012, Ti-2011, proceedings of the 12th World Conference on Titanium. Zhou, L., Chang, H. & Lu, Y. (eds.). Science Press, Vol. 1. p. 226-230 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference proceeding

Forging
Plastic flow
Strain rate
Forgings
Aerospace industry
2011
1 Citation (Scopus)

FIB-SIMS analysis of an aluminum alloy/SiC metal matrix composite

Silk, J. R., Dashwood, R. J. & Chater, R. J., 19 Jan 2011, In : Surface and Interface Analysis. 43, 1-2, p. 488-491 4 p.

Research output: Contribution to journalArticle

metal matrix composites
aluminum alloys
secondary ion mass spectrometry
aluminum
ion microscopes
9 Citations (Scopus)

Production of Ni-35Ti-15Hf alloy via the FFC cambridge process

Wang, B. X., Bhagat, R., Lan, X. Z. & Dashwood, R. J., 2011, In : Journal of the Electrochemical Society. 158, 10, p. D595-D602 8 p.

Research output: Contribution to journalArticle

Atoms
Shape memory effect
Oxides
Energy dispersive spectroscopy
Metals
2010
7 Citations (Scopus)

Characterisation of ConformTM and conventionally extruded Al-4Mg-1Zr. Effect of extrusion route on superplasticity

Katsas, S., Dashwood, R., Todd, G., Jackson, M. & Grimes, R., 27 Apr 2010, In : Journal of Materials Science. 45, 15, p. 4188-4195 8 p.

Research output: Contribution to journalArticle

Superplasticity
Extrusion
Metals
Microstructure
Textures
53 Citations (Scopus)

Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling

Singh, R., Lee, P. D., Lindley, T. C., Kohlhauser, C., Hellmich, C., Bram, M., Imwinkelried, T. & Dashwood, R. J., Jun 2010, In : Acta Biomaterialia. 6, 6, p. 2342-2351 10 p.

Research output: Contribution to journalArticle

Porosity
Anisotropy
Chemical elements
Tomography
Foams
15 Citations (Scopus)

Characterization of the FFC cambridge process for NiTi production using in situ X-ray synchrotron diffraction

Jackson, B. K., Dye, D., Inman, D., Bhagat, R., Talling, R. J., Raghunathan, S. L., Jackson, M. & Dashwood, R. J., 2010, In : Journal of the Electrochemical Society. 157, 4, p. E57-E63 7 p.

Research output: Contribution to journalArticle

Synchrotrons
Diffraction
X rays
Chemical reactions
Furnaces
5 Citations (Scopus)
silicon carbides
aluminum alloys
gallium
metal matrix composites
aluminum
3 Citations (Scopus)

Development of microstructure and properties during the multiple extrusion and consolidation of Al-4Mg-1Zr

Garcia, D. A., Dye, D., Jackson, M., Grimes, R. & Dashwood, R. J., 15 Jun 2010, In : Materials Science and Engineering A. 527, 15, p. 3358-3364 7 p.

Research output: Contribution to journalArticle

consolidation
Consolidation
Extrusion
microstructure
Microstructure
45 Citations (Scopus)

Hierarchically structured titanium foams for tissue scaffold applications

Singh, R., Lee, P. D., Jones, J. R., Poologasundarampillai, G., Post, T., Lindley, T. C. & Dashwood, R. J., Dec 2010, In : Acta Biomaterialia. 6, 12, p. 4596-4604 9 p.

Research output: Contribution to journalArticle

Tissue Scaffolds
Porosity
Titanium
Foams
Struts
9 Citations (Scopus)

Influence of subsequent cold work on the superplastic properties of a friction stir welded (FSW) aluminium alloy

Katsas, S., Dashwood, R., Jackson, M. & Grimes, R., 15 Feb 2010, In : Materials Science and Engineering A. 527, 4-5, p. 1022-1026 5 p.

Research output: Contribution to journalArticle

aluminum alloys
Aluminum alloys
friction
Friction
friction stir welding
66 Citations (Scopus)

In situ synchrotron diffraction of the electrochemical reduction pathway of TiO2

Bhagat, R., Dye, D., Raghunathan, S. L., Talling, R. J., Inman, D., Jackson, B. K., Rao, K. K. & Dashwood, R. J., Sep 2010, In : Acta Materialia. 58, 15, p. 5057-5062 6 p.

Research output: Contribution to journalArticle

Synchrotrons
Diffraction
Industrial chemicals
Electrowinning
Ionic conduction
11 Citations (Scopus)

NiTi production via the FFC Cambridge process: Refinement of process parameters

Jackson, B. K., Inman, D., Jackson, M., Dye, D. & Dashwood, R. J., 2010, In : Journal of the Electrochemical Society. 157, 3, p. E36-E43 8 p.

Research output: Contribution to journalArticle

accumulators
ambient temperature
products
salt baths
sealing