Research output per year
Research output per year
- 39 results
Search results
-
2024
Dynamic FEA Analysis of the Super Lightweight External Cryogenic Fuel Tank (SLWT) Made of Aluminium Alloy 2195–Graphene Nano Composite for Launch Vehicle Aerospace Application
Pazhani, A., Salman, S. S., Venkatraman, M., Patel, A., Xavior, M. A., Batako, A., Paulsamy, J. & Jayaseelan, J., 4 Jul 2024, In: Journal of Composites Science. 8, 7, 22 p., 260.Research output: Contribution to journal › Article › peer-review
Open AccessFile18 Downloads (Pure) -
EBSD characterization of Ag3Sn phase transformation in Sn–Ag lead-free solder alloys: a comparative study before and after heat treatment
Bhavan, J. S., Pazhani, A. & Unnikrishnan, T. G., 13 Aug 2024, In: Journal of Materials Science: Materials in Electronics. 35, 1577.Research output: Contribution to journal › Article › peer-review
-
EBSD characterization of graphene nano sheet reinforced Sn–Ag solder alloy composites
Shanthi Bhavan, J., Pazhani, A., Robi, P. S., Ambi, A., Tg, U. & Kc, V., 1 May 2024, In: Journal of Materials Research and Technology. 30, p. 2768-2780 13 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile2 Citations (Scopus)30 Downloads (Pure) -
Microstructural Evolution and Phase Transformation on Sn–Ag Solder Alloys under High‐Temperature Conditions Focusing on Ag3Sn Phase
Shanthi Bhavan, J., Pazhani, A., Amer, M., Patel, N. & TG, U., Jul 2024, In: Advanced Engineering Materials. 26, 13, 13 p., 2400660.Research output: Contribution to journal › Article › peer-review
Open AccessFile16 Downloads (Pure) -
Small-angle neutron scattering analysis in Sn-Ag Lead-free solder alloys: A focus on the Ag3Sn intermetallic phase
Shanthi Bhavan, J., Kadavath, G., Honecker, D. & Pazhani, A., Nov 2024, In: Materials Characterization. 217, 8 p., 114385.Research output: Contribution to journal › Article › peer-review
Open AccessFile4 Downloads (Pure) -
2023
Identification and recovery of rare earth elements from electronic waste: Material characterization and recovery strategies
Shanthi Bhavan, J., Joy, J. & Pazhani, A., 19 Aug 2023, (E-pub ahead of print) In: Materials Today Communications. 36, 9 p., 106921.Research output: Contribution to journal › Article › peer-review
Open AccessFile4 Citations (Scopus)77 Downloads (Pure) -
Impact behaviour of MWCNTs reinforced YSZ and Al 2O 3 ceramic-nanocomposites prepared via vacuum hot-pressing technique
Ramachandran, K., Gnanasagaran, C. L., Pazhani, A., Kumar, V. H., Xavior, M. A., Subramani, R. R. & Arunkumar, T., 10 May 2023, In: Journal of Materials Research and Technology. 24, p. 6595-6603 9 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile3 Citations (Scopus)48 Downloads (Pure) -
Investigation on CFRP 3D printing build parameters and their effect on topologically optimised complex models
A, A., Launchbury, E. J., Kauffman, M., Pazhani, A. & Michael, A. X., 29 Apr 2023, In: Materials Today: Proceedings. (In-Press), p. (In-Press) 8 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile2 Citations (Scopus)73 Downloads (Pure) -
Microstructural and mechanical behaviours of Y-TZP prepared via slip-casting and fused deposition modelling (FDM)
Gnanasagaran, C. L., Ramachandran, K., Jamadon, N. H., Kumar, V. H., Muchtar, A., Pazhani, A. & Ayaz, B., Nov 2023, In: Heliyon. 9, 11, 10 p., e21705.Research output: Contribution to journal › Article › peer-review
Open AccessFile4 Citations (Scopus)69 Downloads (Pure) -
Novel Machining Configuration of Carbon Fibre Reinforced Polymer (CFRP) Using Wire Electric Discharge Machining (WEDM)
Anbalagan, A., Venugopal, A., Anthony, X. M., Pazhani, A. & Batako, A., 27 Sept 2023, Intelligent Systems in Production Engineering and Maintenance III. Burduk, A., Batako, A. D. L., Machado, J., Wyczółkowski, R., Dostatni, E. & Rojek, I. (eds.). Springer , p. 16-24 9 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
3 Citations (Scopus) -
Processing and characterization of aluminium alloy 6061 graphene composite printed by direct metal laser sintering
Anthony Xavior, M., Ashwath, P., Batako, A., Jeyapandiarajan, P., Joel, J. & Anbalagan, A., 23 Mar 2023, (E-pub ahead of print) In: Materials Today: Proceedings. (In-Press), p. (In-Press) 5 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile4 Citations (Scopus)27 Downloads (Pure) -
Synthesis and characterisation of graphene-reinforced AA 2014 MMC using squeeze casting method for lightweight aerospace structural applications
Pazhani, A., Venkatraman, M., Xavior, M. A., Moganraj, A., Batako, A., Paulsamy, J., Jayaseelan, J., A, A. & Shanthi Bhavan, J., 1 Jun 2023, In: Materials and Design. 230, 14 p., 111990.Research output: Contribution to journal › Article › peer-review
Open AccessFile10 Citations (Scopus)71 Downloads (Pure) -
2022
Characterization Studies on Graphene-Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application
Jayaseelan, J., Pazhani, A., Michael, A. X., Paulchamy, J., Batako, A. & Hosamane Guruswamy, P. K., 26 Aug 2022, In: Materials. 15, 17, 24 p., 5907.Research output: Contribution to journal › Article › peer-review
Open AccessFile8 Citations (Scopus)150 Downloads (Pure) -
Influence of In-Process Cryogenic Cooling on Mechanical Performance of Friction Stir T6 – AA 2900 Alloy Weldments
Pazhani, A., Xavior, M. A., Jeyapandiarajan, P. & Joel, J., 25 Jan 2022, Conference proceedings ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers(ASME), V02AT02A027Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
-
Selective laser melting of Al–Si–10Mg alloy: microstructural studies and mechanical properties assessment
Pazhani, A., Xavior, M. A., Batako, A., Jeyapandiarajan, P. & Joel, J., 1 Mar 2022, In: Journal of Materials Research and Technology. 17, March-April, p. 2249-2258 10 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile12 Citations (Scopus)93 Downloads (Pure) -
Surface Finish and Property Evaluation of Direct Metal Laser Sintered (DMLS) Al-Si-10Mg alloy
Pazhani, A., Anthony Xavior, M., Jeyapandiarajan, P., Joel, J. & Batako, A., 15 Jul 2022, (E-pub ahead of print) In: Journal of Physics: Conference Series. 2198, 1, 6 p., 012055.Research output: Contribution to journal › Conference article › peer-review
Open AccessFile1 Citation (Scopus)31 Downloads (Pure) -
2021
Dry Sliding Wear Behaviour of T6-Aluminium Alloy Composites Compared with Existing Aircraft Brake Pads
Pazhani, A. & Xavior, M. A., 1 Dec 2021, In: Arabian Journal for Science and Engineering. 46, 12, p. 11971-11984 14 p.Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus) -
Processing, Characterization, and Properties of α-Al2O3-AA2900 Composites for Aerospace Brake Pad Applications
Pazhani, A., Xavior, M. A. & Batako, A. D., 1 Dec 2021, In: JOM. 73, 12, p. 4365-4375 11 p.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
2020
Improving the surface characteristics by employing FSP on the composites for the automobile brake pad application
Pazhani, A., Xavior, M. A. & Rajendran, R., 21 Jan 2020, Conference proceedings for ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
-
Surface modification on aluminum metal matrix composite for high strength application: Current state of art
Pazhani, A. & Anthony Xavior, M., 17 Dec 2020, (E-pub ahead of print) In: Materials Today: Proceedings. 46, 17, p. 7130-7134 5 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
2019
Fatigue life and fracture morphology of Inconel 718 machined by spark EDM process
Anthony Xavior, M. & Pazhani, A., 23 Apr 2019, (E-pub ahead of print) In: Procedia Manufacturing. 30, p. 292-299 8 p.Research output: Contribution to journal › Conference article › peer-review
4 Citations (Scopus) -
Frictional property evaluation of aluminium alloy based metal matrix composites under dry braking condition in pin - On - disc system
Pazhani, A., Joel, J., Jeyapandiarajan, P., Anthony Xavior, M. & Rajendran, R., 9 Dec 2019, In: Materials Research Express. 7, 1, 13 p., 016509.Research output: Contribution to journal › Article › peer-review
Open Access5 Citations (Scopus) -
2018
Analysis of Strength and Microstructural Characteristics of Heat Treated Al Alloy Composites
Pazhani, A., Jeyapandiarajan, P., Anthony Xavior, M., Chintankumar, S., Neel, S. & Kumar, M., 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 11802-11807 6 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Effect of ceramic reinforcements on microwave sintered metal matrix composites
Pazhani, A. & Xavior, M. A., 2 Jan 2018, In: Materials and Manufacturing Processes. 33, 1, p. 7-12 6 p.Research output: Contribution to journal › Article › peer-review
31 Citations (Scopus) -
Effect of Copper Alloying and Reinforcement Percentage on the Microstructure-Tribological Aspects of the Aluminium Alloy Composites
Pazhani, A., Jeyapandiarajan, P., Xavior, M. A., Somani, M., Dharnia, U. & Grover, H., 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 11853-11858 6 p.Research output: Contribution to journal › Conference article › peer-review
5 Citations (Scopus) -
Effect of microwave heat treating processing on frictional behaviour of aluminium alloy 2900 composites
Pazhani, A. & Anthony Xavior, M., 20 Mar 2018, (E-pub ahead of print) In: Tribology - Materials, Surfaces and Interfaces. 12, 2, p. 85-96 12 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
Effect of recast layer on the low cycle fatigue life of electric discharge machined inconel 718
Anthony Xavior, M., Ranganathan, N. & Pazhani, A., 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 12666-12672 7 p.Research output: Contribution to journal › Conference article › peer-review
7 Citations (Scopus) -
Effect of recast layer on the strength properties of the spark electric discharge machined aluminium alloy composites
Pazhani, A., Xavior, M. A., Nigam, T., Goel, A. & Rathi, M., 10 Jan 2018, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). American Society of Mechanical Engineers(ASME)Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
-
Effect of recast layer thickness on the mechanical characteristics of INCONEL 718 machined by spark EDM process
Xavior, M. A., Pazhani, A., Ali, H., Moideen, A., Banu, P., Illanthendral, Raneez, M. & Sancylal, S., 11 Apr 2018, In: Materials Today: Proceedings. 5, 2, p. 8249-8255 7 p.Research output: Contribution to journal › Conference article › peer-review
8 Citations (Scopus) -
Effect of SiC and Al2O3 particles addition to AA 2900 and AA 2024 MMC's synthesized through microwave sintering
Pazhani, A., Joel, J., Anthony Xavior, M. & Prashantha Kumar, H. G., 11 Apr 2018, In: Materials Today: Proceedings. 5, 2, p. 7329-7336 8 p.Research output: Contribution to journal › Conference article › peer-review
24 Citations (Scopus) -
Flexural studies of graphene reinforced aluminium metal matrix composite
Pazhani, A., Jeyapandiarajan, P., Joel, J., Prashantha Kumar, H. G., Anthony Xavior, M., Sumanth, N., Saketh Reddy, C. & Deepa, 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 13459-13463 5 p.Research output: Contribution to journal › Conference article › peer-review
13 Citations (Scopus) -
Heat Treating Studies of Graphene Reinforced Aluminium Metal Matrix Composite
Pazhani, A., Jeyapandiarajan, P., Anthony Xavior, M., Verma, R., Kumar Singh, N. & Varalaxshmi, 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 11859-11863 5 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Mechanical properties evaluation of hot extruded AA 2024 -Graphene Nanocomposites
Anthony Xavior, M., Ranganathan, N., Prashantha Kumar, H. G., Joel, J. & Pazhani, A., 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 12519-12524 6 p.Research output: Contribution to journal › Conference article › peer-review
4 Citations (Scopus) -
Processing and characterization of extruded 2024 series of aluminum alloy
Pazhani, A., Joel, J., Kumar, H. G. P., Xavior, M. A., Goel, A., Nigam, T. & Rathi, M., 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 12479-12483 5 p.Research output: Contribution to journal › Conference article › peer-review
10 Citations (Scopus) -
Synthesis and property evaluation of hot extruded AA2024 -MWCNT Nanocomposites
Prashantha Kumar, H. G., Anthony Xavior, M., Pazhani, A., Joel, J., Hosmani, S., Shivalli, P. M., Singh, H. & Chakraborty, K., 12 Jun 2018, In: Materials Today: Proceedings. 5, 5, p. 12545-12550 6 p.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Ultrasonication and microwave processing of aluminum alloy- Graphene - Al2O3 nanocomposite
Kumar, H. G. P., Xavior, M. A. & Pazhani, A., 2 Jan 2018, In: Materials and Manufacturing Processes. 33, 1, p. 13-18 6 p.Research output: Contribution to journal › Article › peer-review
14 Citations (Scopus) -
2016
Effect of precipitation hardening on particle reinforced aluminum alloy composites
Xavior, M. A., Pazhani, A. & Rajendran, R., 7 Mar 2016, Conference Proceedings ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers(ASME), 7 p. (ASME 2015 International Mechanical Engineering Congress and Exposition).Research output: Chapter in Book/Report/Conference proceeding › Conference proceeding › peer-review
1 Citation (Scopus) -
Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys
Pazhani, A. & Xavior, M. A., 1 May 2016, In: Journal of Materials Research. 31, 9, p. 1201-1219 19 p.Research output: Contribution to journal › Article › peer-review
40 Citations (Scopus) -
2014
The effect of ball milling & reinforcement percentage on sintered samples of aluminium alloy metal matrix composites
Pazhani, A. & Anthony Xavior, M., 30 Dec 2014, In: Procedia Engineering. 97, p. 1027-1032 6 p.Research output: Contribution to journal › Conference article › peer-review
55 Citations (Scopus)